THIS DEVICE MAKES WORKING AT THE TABLE SAW A LOT SAFER | DIY GRIPPER PUSHBLOCK
ฝัง
- เผยแพร่เมื่อ 2 พ.ย. 2019
- To make working on the table saw safer, I built a Gripper. I already have a few safety devices like my Push Stick or my Push Blocks for the router table. This Gripper is very easy to build and it works fantastic.
ISBI
----------------------------------------------------------------------------------------------------------------
If you want to support my TH-cam-Channel you can donate here :
www.paypal.me/isimplybuiltit
----------------------------------------------------------------------------------------------------------------
FOLLOW ME ON
INSTAGRAMM :
/ i_simply_built_it
TWITTER :
/ isimplybuiltit
PINTEREST
www.pinterest.ch/isimplybuiltit/
FACEBOOK :
/ isimplybuiltit
-------------------------------------------------------------------------------
#ISimplyBuiltIt #like #comment
------------------------------------------------------------------------------- - แนวปฏิบัติและการใช้ชีวิต
So very glad I found you! Immediately downloaded the 1st video I have seen so I can follow along and make the build in my shop. I would pay $$$ to purchase plans, please consider offering this in the future.
💥mind blown.....from 6:08 on...My friend, those 11 and I half minutes I just spent here were very well spent. . At the Least. Thank you .
This cool Gripper is waiting on my to do list. Well done!
Seriously? 😂 I learned SOOOO much!!!! I made the exact same one in as much time as this video ran for. I just followed your steps and kept up!!!
Nice one , LOL
Very good, simple but effective design. I made one this week and am very pleased with the result, and its functionality and safety. Many thanks for sharing your creativity and expertise.
I’m glad I didn’t see a comment saying to just go buy one. Sure it would be easier, there is some pride in building your own. The big plus with yours is that if it’s not adjusted quite right for the cut and the blade runs into it, the piece that got cut and be easily replaced. I think that if I was going to make one of these, I’d make 2 of them and some spare parts. That way if one gets cut up you have a spare handy to continue. Then when done with the project replace the damaged part with a spare one. And maybe make a wider one or two for better control of larger pieces.
I love the background sound instead of music. Great edits too.
Love your channel and everything you build. This is why I watch youtube! Thank you for posting
Thank you so much. I'm glad to read that.
Fantastic job my friend. I will have to watch this a few more times to be capable of making one for myself. Thanks for the great video.
Beautiful construction for a security tool that I really believe is effective. Thanks for sharing.
Thanks
That is so similar to the ones I made that I thought it was the same at first. Great job.
Thanks
I really enjoy your videos and your knowledge. I am new to your channel but so happy i found you. Creative intelligent and well produced, these are among the finest instructional videos I have seen. Incidentally the hand holds on your cross cut sled are pure genius. Thanks.
Thank you so much. I'm glad to read that. I really appreciate that.
great vid and build, thanks
No Talking makes your Videos 80% better ... 👍🏽
Ok. I just speak in more complicated Projects.
Another great video. Real pleasure watching you work!!!
Thank you so much. I'm glad to read that.
Fantastic job, I will try to do it myself. Thank you
Your creations are fantastic but could you PLEASE give measurements for each project when you make the video it would help up your subscribers immensely when we try to build your projects.
Guess not..
@@princessanineveh 😂
Very Very Nice! New project for the summer when I can get into my garage! Too cold here in Minnesota right now! :)
Very nicely done, as always!
Thanks.
Great work! Thank you for sharing!
Thanks
Dude....impressive very impressive!!
Muito bom trabalho...parabéns 😊
thank you dude.
now that is impressive! i will try to build one of those one day
Thanks
Cool! Love to build this one day 😄👍
Excelente!, hiciste fabricas la herramienta casera👍.Gracias a tu video inspirado
Gracias. Me alegro si te gusta
New subcriber because of this video, thank you very much for sharing, you just save me a fortune. :)
Excellent. Very well done.
Thanks.
Another good one my friend.
Thank you.
Sehr gut! Like others, wish you had plans. Guess I'll have to design myself. ;-) Danke for the inspiration.
Great Build Sir.👍😁
Thanks.
Really nice project!
Thanks.
"magnifik carpentry skillz"! thanx 4 the share buddy... ciao
Top Teil, super gemacht prima Idee
Vielen Dank
Excellent
Nice work.
Brilliant!
Thank you.
Great job 👌
Thank you.
Nice idea on table saw sled for hand holes. They definitely keep hands away from blade.
Tip Top video and none of the usual TH-cam faff.
cool idea, thanks :)
Nicely done, looking forward to making this now
Thanks
Hello there. good idea. beautiful device working on a table. congratulations. greetings..
Thank you.
good work.
How many people were also distracted by that amazing homemade sanding block he has?
Great video nice ideal 👍
Thanks
Nice Push block & (Sanding block at 5:16). I gotta find the video to make one of those! :)
Would love plans for this. :)
OTTIMO VIDEO.
ESAUSTIVO E INTERESSANTE NELLE SEGUEZE VIDEO.
SALUTI
SALVIO
hello brother a query I write from Venezuela and I congratulate you for all your projects
Thank you so much.
friend good afternoon I can ask you to see if you make several pieces of bone wood "tools can you make ???
Nice work. I was wondering if you are willing to make the dimensions or plans available? Your version seems much more straight forward than others I have seen, so it would be nice to give it a go. Thank you for sharing
Thanks. Maybe i can make plans sometimes.
@@ISIMPLYBUILTIT , thank you. I think there are a few people that would appreciate that
MadAsKiwi i know i would
Me too!
Me three
I wish I could order the available plans.Great Gripper. Tks a lot
Great build. Would love to purchase the plans for it please.
Nice job. New subscriber
Thanks.
Amazing job, gave me a bit of anxiety at the very end though near that blade.
As fast as you ran the video I found it difficult to follow so I slowed it down but I still could not follow the work you did here. Don't get me wrong, it is stunning, much better than a purchased one. I could never do this. It was fun to watch you however.
is there any chance that you could supply a schematic for this brilliant push block?
do you have the plans available for this push gripper? How about that sanding block? That is really cool.
Good morning
Do you have the plan of the clamp pusher block please?
Thank you so much.
Beautiful achievement.
yeeeaaaaahhhh
nice
Świetny filmik ! Szkoda tylko, że nie ma podanych wymiarów ...
Plans would be nice.Thanx.
Any plans available? Tks for sharing
I made 2 lov them
great
very nice!
grr-rip(per) off :P
Ta muito fixe
i like this project, but i got 2 questions for you. nr.1. is that ander 1 you built and nr.2. do you have plans for both of them?
Beautiful work as always. What is the name of the clamp with the little black handle?
Thanks. I think you mean this one www.amazon.com/Bessey-KLI3-012-12-Inch-Ratcheting-KliKlamp/dp/B00008K2TE/ref=sr_1_47?keywords=bessey+clamp&qid=1573193707&sr=8-47
Great video. Thanks for sharing. Do you have some drawings with the size of all pieces. If you don't mind could you share those in the video description?
Best regards Valentin
No i made it without plans. Maybe i can make plans sometimes.
I didn't see any comment in the comments. The only other thing I would consider to add(in case I have missed it in your model), is like a little 'hook' on the 'arm' that slides along your fence (our far left as we see the video) to help push the wood along. Just the same way than a normal push stick. hope that makes sense.
Other than that I love your model.
Thanks. That's a nice idea.
Hi.. Was there ever any plans for this done?
What size router bit? What width plywood? Thanks in advance. Great video.
What material do you use for grip at the base of the push block?
Thanks
It's astonishing how many people are asking for plans on a channel called I SIMPLY BUILT IT.
Should have plans for it…. If not free a little charge for the plans would help out the woodsmiths community.
Very nice! What was the material you used to make it grip?
Thanks. It's something like this. www.amazon.com/dp/B07MNW8QR1/ref=sr_1_52?__mk_de_DE=ÅMÅŽÕÑ&crid=ZVYVT0IOIV88&keywords=self+adhesive+acoustic+foam&qid=1573823813&sprefix=self+adhesive+ac%2Caps%2C241&sr=8-52
This looks really cool, but are the design documents posted somewhere? It's hard to follow every step from the video. Thanks.
Well done!
Do you have any plans for it?
He has plans for safety
Maybe i can make plans sometimes.
I SIMPLY BUILT IT looking foreword for it. I’d love to make one
I was wanting plans for this if you have them available. Can you please let me know where.
Any plans for this push block
do you have blueprints for this or at least the measurements for it
Great review may i ask what type of countersunk drill bit you used on the bosch drill please.
I use a countersunk drill from Wolfcraft : www.amazon.de/Wolfcraft-2544000-Senkbohrer-mit-Tiefenstopp/dp/B002OHNH16/ref=sr_1_13?__mk_de_DE=ÅMÅŽÕÑ&crid=21TALI39FSR40&keywords=wolfcraft+senker+mit+tiefenstop&qid=1573822399&sprefix=wolfcraft+senker%2Caps%2C161&sr=8-13 . But this one should work in the same way : www.amazon.com/dp/B07KKLCGRY/ref=sr_1_16?__mk_de_DE=ÅMÅŽÕÑ&keywords=countersunk+drill+with+depth+stop&qid=1573822567&sr=8-16 . You just have to choose the one with the diameter you need.
@@ISIMPLYBUILTIT Thanks a lot
Any plans or dim info?
Wow! That turned out so nice, I wouldn't even want to use it. I would be afraid to cut into it. Great job.
Very nice ! Where did you get the rubber to glue on the bottom ? :-)
Thanks. I ordered it from Amazon.de : www.amazon.de/gp/product/B00BSAAB1E/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 . Maybe this from Amazon.com could work : www.amazon.com/Weather-Density-Adhesive-Weatherstrip-Insulation/dp/B07477J8KL/ref=sr_1_17?crid=16MTA9VZIZDN9&keywords=self+adhesive+sealing+strip+tape&qid=1573193947&sprefix=self+adhesive+seal%2Caps%2C227&sr=8-17
Make the plans ! Lol
Hope i can have the sizes
Please send me measurements, I would like to make one
Do you have any plans for any of your stuff please let me know
Could you make available plans or parts list??
Maybe i can make plans sometimes.
I would suggest building this with wood and CA glue and eliminate a lot of the metal hardware. I'd want to eliminate as much risk as possible of hitting a screw or bolt with the saw if I accidentally ran it over the blade. Nice MicroJig copy though.
Thanks. I think this screws should not be a problem because they will never came near the blade.
Nicely done, how you call this router bit type ?
Thanks. It's a T-Nut Router Bit
Sometimes called a key-hole bit too.
you have the plans
Do you have plans for this push block.
you forgot to paint it yellow 😁
👍
What anti slip material did you use plss. TIA
I ordered it from Amazon.de : www.amazon.de/gp/product/B00BSAAB1E/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 . Maybe this from Amazon.com could work : www.amazon.com/Weather-Density-Adhesive-Weatherstrip-Insulation/dp/B07477J8KL/ref=sr_1_17?crid=16MTA9VZIZDN9&keywords=self+adhesive+sealing+strip+tape&qid=1573193947&sprefix=self+adhesive+seal%2Caps%2C227&sr=8-17
Why is your splitter set so high? Doesn't it only need to be level with the blade?
Possibly to enable installation of a dust guard
Any plans for this? Would gladly send some money to you if there were plans for your projects.