@@Mark__IZHK2005 not with the right glue. I do agree though glued legos are annoying if you plan on using the parts for another engine. I suggest using a peice of printer paper in between all the peices. Trim it to size and it will hold together no problem. It also seals a little better.
I have a super similar design and i know a tip to make the piston unbreakable: Use the 1X4 block with three holes instead of the 1x2 and connect it to 1x2’s on the free spaces at the ends to make the structure firmer.
I made one and it’s faster by a decent amount my recommendation would be hot glue or super glue the piston head on and lube toe crank and the valve crank with vegetable oil also you probly have 2 studs it the intake or more that are solid get single studs with holes and it will help an ok amount the other thing to keep it together is clue the valve parts together make sure the sides are reinforced with more layers that’s about it and make sure you have performance piston and valve
That is not the fastest but its regular i have a 12000 rpm Lego turbine with the desibel equivilant of a jet engine and it is very fast but the piston has more torque not hp
Ok me engine is butterfly 6x6 1 cylinder my dad was checking with a rev counter, I had 5000 rpm but I had a sticky piston and connecting rod to withstand rotation
I love how the piston just reattached itself at the end lmao
Lol
LMFAO!!!
@Micah Samuels fgo?
Bruh the fact it reconnected itself that's was top teir lol
Nice engine, but it’s not the fastest yet xD
Glue that piston together and you can hold it at full throttle forever
And also melt Lego pieces.
Glue melt lego,everyone know that,dont do this
@@Mark__IZHK2005 not with the right glue. I do agree though glued legos are annoying if you plan on using the parts for another engine. I suggest using a peice of printer paper in between all the peices. Trim it to size and it will hold together no problem. It also seals a little better.
i use sticky tack it work pretty well
@@Mark__IZHK2005just use oil and you wont
It just fixes itself, impressive.
I have a super similar design and i know a tip to make the piston unbreakable: Use the 1X4 block with three holes instead of the 1x2 and connect it to 1x2’s on the free spaces at the ends to make the structure firmer.
Maybe the fastest piston engine, but someone made an engine that spins at 12.000RPM
Fastest I've seen. Wonder what the valve design is.
@Tristan Arnold I did. Dunno which is faster
Put olive oil on the sides in the piston walve, and it will go faster
The Piston reattached itself after coming apart 🤣🤣lmbo
Gotta gorilla glue that piston on there.
Wow
Damn it almost rebuilt itself
Nicee i have made a super fast one but ran out of batteries
You dont need batteries for a vacuum engine?
VACUUM not electric engine
It Works Out Of A Vacuum Engine but NOT with batteries
Its not that fast, you are blowing your piston. Replace the piston with a stronger one
Sure 70109rpm
@@legovacuumenginemaster5885 no
@@njordlindgard1205 7109 rpm
@@legovacuumenginemaster5885 what did you use to measure, can you make a video measuring the speed?
@@legovacuumenginemaster5885 seems accurate to me. I’m sure if I tested it I’d get the same result
Sounds like vtec
I made one and it’s faster by a decent amount my recommendation would be hot glue or super glue the piston head on and lube toe crank and the valve crank with vegetable oil also you probly have 2 studs it the intake or more that are solid get single studs with holes and it will help an ok amount the other thing to keep it together is clue the valve parts together make sure the sides are reinforced with more layers that’s about it and make sure you have performance piston and valve
its maybe not the fastest but it rebuilds itself thats already the worlds sickest feature
Nice engine. Unfortunately it doesn’t even come close to my homemade turbine engine
If you want it faster try put a little olive oil in the piston(it helps)
You should glue the piston head.
super glue everything together
Glue the piston and put the wheel higher up its expanding and making contact
you need to glue your piston
Use double side tape works well
Smaller flywheel reinforce piston
Wonder if a counter balance would help since it jerks to the side at speed up
bro making torque with legos
It aint the afstest but its cool
It's not quite fast but it just doesn't have enough support on the piston
Bro can be an engine mechanic
Normal air engines are still faster and they never blow up.
Use tighter lego sport wheels
Put some super glue on the piston
It reattached at the end 😂😂😂😂
Superglue the piston together
Super glue the piston head on mine was the same but I couldn’t go half way
You have to glue the piston down
Use superglue to glue the components together it's what I do
Someone built one at 11 000 rpm (it was a turbine engine)
don't count
Are you using a Dyson
There’s a new record
You have to glue the piston
Have I been beaten here?
I think so
Your rpm?
@@legovacuumenginemaster5885 6750+ I believe
@@KFPlusLegoMastery Then yes I got 7109 rpm
By the way thank you for talking to me your such a big inspiration to me and you are why I make videos so thank you 👍🙏
U should glue it
Glue your piston or glue everything💀
Might need to study the tolerances of the plastic, pretty cool project, keep us updated.
Bro just super glue
I use two two by four thick block stacked on top of each other as the piston
Glue the piston
Put vegetable oil in it might run faster
I have one and it has a 186 ounce piston
try hot glue on the piston
jisy glue all things that explode
Glue it and it melts
Your kinda bending it to the side that might be why it’s breaking so easily
Dude. Super glue the piston
super glue?
Tell me how to make it!!
That's a really fast,engine is It supercharged?
Super glue?
How to start à vacuum engine because mine want start
Pretty cool it is fast but i saw engines they're lot faster
i have seen one have 11k rpm
the turbine don't count
Try to glue it
Glue
Tut plz
Glue it
Just make a clutch
You call this fast? Guessing by the sound mine has about 2000-3000 more rpm, with a butterfly cylinder
What’s the rpm?
7109
7109
7109 RPM
Bro thats not even close to fastest. The best use super glue we all know it
Туториал пожалуйста
как по твоему можно вот это безумие построить?
и снять туториал по этому?
Ha! My computer fan is faster running A single tab!
tutorial?
Sadly no was I working on something I ven faster then that one it will be out on Wednesday
Moi
Its not
Rmp?
Nice but it's not the fastest the fastest one is 12300 rpm
Bit slow
Lol
That is not the fastest but its regular i have a 12000 rpm Lego turbine with the desibel equivilant of a jet engine and it is very fast but the piston has more torque not hp
get better supports lmao
No i seen faster
Mine is faster
my engine is faster
You don’t have a video on it so there’s no proof so mine is faster
I’m kid
9 years old
@@PrzemyslawJ and I’m 15
Ok me engine is butterfly 6x6 1 cylinder
my dad was checking with a rev counter, I had 5000 rpm but I had a sticky piston and connecting rod to withstand rotation
You must stick it together with glue
How do you know its the "fastest"
Listen next time he said might
mine is faster
I got an idea take some hot glue and put it on the Piston head like the flat part is a top but put the hot glue weird attaches to the shaft
I'm not sure about fastest but this is definitely up there.
pielime moska tu resnais dalbajob❤
Get a tachometer and see
mine is faster
Have you tried glueing the Lego platforms to the connecting rod?
my engine took like 9000 rpm without blowing up
Do you have proof
@@legovacuumenginemaster5885 not yet
and i made the engine into an inline 2 engine an hour ago
@@roadsidegarage69 how????
It’s not the fastest and your piston is the problem
by putting on tones of olive oil i got mine to go 11000rpm with a massive flywheele
11000 rpm with a big fly wheel?
U realise thats almost 200 rotations a second
@@dividingrain1907 ye
@@dividingrain1907 yeah
Can't get to full throttle because you have a high friction in your "engine block".
I have one that will launch the piston and attach to the top of the cylinder it's kind of annoying and I don't really want to glue it but I might
this defidently isnt the fastest but good engine i suppose.