how you store your rc, place a big one just in the middle under the skid, how you have it also compresses the shocks still. they will get weaker. (squirrelod's tip)
I saw a video a while ago that said something about if you mount your shocks upside down and they aren't full of fluid, the valve will be sitting out of the fluid when they are fully extended. I don't know how much difference it will really make
Super-nice truck! Loving the chains! I just did a video with some fast driving with chains in the snow on a different truck. Will make some for my Jeep as well:)
Andrew, That is a "Street League Skate Figure" no I didn't cut him, I cut a small hole in the body where the floor pan is and glued his legs underneath.
with the g transition shocks.. do you run the sprung set up or droop set up? and do the sprung and droop set ups have to be reversed since you have the shocks upside down?
I run them in sprung setup with very thick oil. I put all my shocks upside down for a few reasons. Helps stop them from leaking, looks better, and in theory it brings the weight lower. Thanks for watching!!!
how you store your rc, place a big one just in the middle under the skid, how you have it also compresses the shocks still. they will get weaker. (squirrelod's tip)
Thanks Steven nice job on the vid and you have done a freaking awesome job on that rig!
Thank you Craig!
Great tips!
Great video bro. Lots of great tips. Well done. ;)
u should put the tape under the skid plate so you don't mess up wheels and shocks
Very nice rig. Thanks for the video. I'm trying to decide between this one or the Gmade :-)
I saw a video a while ago that said something about if you mount your shocks upside down and they aren't full of fluid, the valve will be sitting out of the fluid when they are fully extended. I don't know how much difference it will really make
Super-nice truck! Loving the chains! I just did a video with some fast driving with chains in the snow on a different truck. Will make some for my Jeep as well:)
I like that battery tray. I may have to try that. Does give you a better balance of weight ?
How did you do the scale figure? Did you cut a figure to the waist and glue it?
Andrew, That is a "Street League Skate Figure" no I didn't cut him, I cut a small hole in the body where the floor pan is and glued his legs underneath.
thanks, any chance you can show a quick vid of how you configured the figure?
Why don't u upload anymore??
with the g transition shocks.. do you run the sprung set up or droop set up? and do the sprung and droop set ups have to be reversed since you have the shocks upside down?
I run them in sprung setup with very thick oil. I put all my shocks upside down for a few reasons. Helps stop them from leaking, looks better, and in theory it brings the weight lower. Thanks for watching!!!
what lenght and type shocks are these?
Those are G Made shocks 105mm
How do you water proof your rigs
beachman2882 Marine grease and Plasti Dip, check out my other videos, I have a waterproofing video.
muy bonito
how much is this ?
I just leave my scx 10 honcho upside down
I just leave my scx 10 honcho upside down