ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How to get in the trunk of your 2000 Mercedes S500(W220) When all else fails.
ฝัง
- เผยแพร่เมื่อ 7 มี.ค. 2018
- This a video on how to get into the trunk of your Mercedes when all else fails. When your Valet key won't open it. Your key fob and your button on the door doesn't work either. In my case the trunk release was broken. I did not take mine all the way apart because like I said in the video my trunk is rigged to open now because I didn't want to replace the assembly at this point. I just bought this car from auction and it needs more important things done to it at the moment.
Thx Man ! Greatyns from Poland
Mam ten problem wlasnie dzis. Dopiero udało mi się odkleić tylną srebrną blendę...
Let's see if this works
..it worked... took 10 min... thank you 👍👍👍
Now for the easy method.
Open the door.
Pop the bonnet/hood.
Take the top off the right side fuse box.
See those two, or three (depending on the model) big fuses at the front?
Attach a 12v + to the pin that sticks through the fuse body (you only have to hold it on while you get your boot open).
Attach the 12v - to the ground point near the fuse box
Pop the boot/trunk with the key fob.
There isnt a lot of power going into the system, so it will usually only pop the lock, it doesnt usually activate the lift pump if you have one.
The only time this failed to work was when the Prefuse in the boot/trunk blew, I had to cut a hole under the number plate trim to solve that one.
This was very good,and it worked, I checked other you tubers---but yours was the most informative.You covered all of the key points, you saved me a $100 bucks, I thank you for that..Very good work..Jerry
you can take your manual key from the key fob and open the truck without. Its the one you hook your key ring. Just a release point and insert it twist to your left.
@Justin Mwaka... I was thinking the same thing, there's a little key that's attached to your key fob and you stick it in the key hole and twist and the trunk pops open... #howtogetinabenz101
That doesnt work believe me ive done over 10 of these and that key dont turn shit. If the assembly goes its done. U have to remove bulb and go from that side. Not what he did. The keyhole mecanism stays in place. He messed his up doin that
@@joshgray2024 hi Josh I know this is an old thread, but dealing with this issue now. I looked on your channel to find a vid on this, but would you mind giving me a bit more detail on how to access using the bulb? I really don't want to spend $25 on the service manual, I am just trying to do a cheap repair for my grandfather's car. Thanks.
@@fatdoggolovespizza you can also take yellow air line under the seat and hook air line to it and it sometimes works to help open the trunk. Also can take a long metal rod and tap the release button in side of the trunk. Emergency button if someone were to be locked in trunk..sounds crazy right but it has it. The way to do that is to remove seat or get in behind armrest and slide a long thin rod straight through the armrest. Top side part of the back seat and tap the green emergency release button. But the way through the reverse bulb is to remove it. Pull the plastic piece out that bulb sits in and there is a rod you can grab with needle nose pliers and pull or push it and it pops. Or remove the plastic trim where license plate goes to really get better way through it. There's more than one way to do it. Have someone tapping trunk button after resetting trunk fuse under rear seat on pass side floor where your feet would go. Pull it. Put it back in. Have someone tap trunk button on driver door while you try pushing down on trunk then up
This worked thanks so much!!!!
Done it , Sir. One love❤
Worked for me ,Thanks for the video...
Pure gold, thank you!
thank you. this help me a lot haha
it worked perfect!
It sounded like I was at the dentist there for a minute. LOL
Thanks Man, that was a life saver!
I have a 2006 S430. Can’t open my trunk from the buttons, key fob, or the metal stick inside the key fob. I got my license plate off. I got the only visible bolt out after a lot of trying… and now the panel won’t come out. How do I get the panel off?
It didn't work for my 2003 S500 no videos on 2003 models the lock looks different than all the previous year models took out all the screws and still the lock doesn't move it acts as if it's still bolted down smh this is sickening
I feel you. 2003 CL600 and it's not letting me in. Not with FOB or the key. Super frustrating.
U ever figure this out? I have an 06
put charger on + leg and pop, opened the trunk. thx
the brilliant MB engineers should have a spot in the engine compartment with plus and minus connections to start or charge your S class. they have a small battery under the passenger side floor . my valet key wont open the trunk.. main battery is in the trunk
They do. It's the law!
Do 1995 C220's have that jump point?
How you rig the trunk to work with the remote
How did u reg it to open it wit the remote again
Chris Aguiar when you push the button a plastic cylinder pushes against another plastic part and pops it. I took a small piece of plastic and superglue it the the other piece of plastic to make it similar to the same length it was to begin with.
keepitkush 520 thanks bro
@@keepitkush5208will this work on e320?
You Showed Thieves how to break in my Trunk SMH
But you showed the ground when y Po u said like this right here, or am I the only one that didn't see what he was showing us
boh
But I don’t have the keeeeeey
You are so damn long winded
He spends a minute unscrewing the license plate and records it? He is, unfortunately but most likely, a moron. Should be driving a rotted-out 99 Chevy pickup
👎👎👎👎👎👎👎👎👎👎👎👎