Hi, the lever on this truck was hard when trying the turn signals and it felt stuck when trying to put the high beams on. The high beams would not work for that reason because the lever got stuck on the low beam. But I would recommend starting with the simplest things like checking your turn signal bulbs, fuses, relays, and do a good visual inspection on the headlight harness, connectors etc. If all that checked off okay, I would try and get a new turn signal switch and test it out to see if that fixes the problem. It would be great if you have another truck available or a friend with a similar truck that would let you switch the part just to test the turn signal switch. If you're still having problems after all that, check the harness and connector that goes from the turn signal switch to the bottom of the steering column. All that I mentioned is just to avoid using wiring diagrams, testing and tracing wires lol.
Buen dia, creo que en una 2020 KW T680 si no lo encuentra en las cajas de fusibles probablemente este montado en la transmission arriba en la parte de atras. Espero y le sirva de algo, saludos!✌️
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Thank you for no bs story telling! Easy to understand video! Again Thank You!!!!!!
Very short yet very detailed video. Thank you for sharing with us.
This was actually much better with dynamic background music than no music and boring monologue how it usually goes in these type of videos
The best videos are always like these guys, easy to understand and minimal talking badass 👍 from San Antonio Texas 👍
Thank you very much! Very helpful video
Not a lot of talk and opinion...perfect. Thanks
Thanks for the video, looks easy enough. 👍👍👍
You also have the same 2 lights on on my truck, the wrench, and the check engine light, why's that
This truck had an active SCR fault code and was also low on fuel causing starting problems. That's why it had the two lights on.
Whats the symptoms? My turn rear signals work and so do my marker lights but not my headlight signals. Already replaces the front hood harness
Hi, the lever on this truck was hard when trying the turn signals and it felt stuck when trying to put the high beams on. The high beams would not work for that reason because the lever got stuck on the low beam. But I would recommend starting with the simplest things like checking your turn signal bulbs, fuses, relays, and do a good visual inspection on the headlight harness, connectors etc. If all that checked off okay, I would try and get a new turn signal switch and test it out to see if that fixes the problem. It would be great if you have another truck available or a friend with a similar truck that would let you switch the part just to test the turn signal switch. If you're still having problems after all that, check the harness and connector that goes from the turn signal switch to the bottom of the steering column. All that I mentioned is just to avoid using wiring diagrams, testing and tracing wires lol.
Thanks for this
Buenos dias disculpe la pregunta cuale es el fusible de la reversa
Buen dia, creo que en una 2020 KW T680 si no lo encuentra en las cajas de fusibles probablemente este montado en la transmission arriba en la parte de atras. Espero y le sirva de algo, saludos!✌️
👌👍
Where can I get this switch? I can only find the 8 pin type.
We got it from the dealership MHC Kenworth El Paso, TX.
I just priced checked it was over 400 dollars..but I need it and I def loved this video..now as a female ik I can replace myself
Para que funcionen las prebentibas como ay que aserle