The Ultimate Guide to Ryobi Tools: My Personal Picks & What to Avoid
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2024
- In this guide, Bryan will cover everything you need to know about Ryobi tools, from his personal picks to what tools avoid. He'll discuss of his entire collection of Ryobi Woodworking tools, how he uses them (or doesn't use them), and what to watch out for.
If you're looking for a comprehensive guide to Ryobi woodworking tools, then this is the video for you! By the end of this video, you'll have everything you need to know about Ryobi tools, from the basics to the hidden gems. Plus, you'll be able to avoid some of the inevitable mistakes that Bryan made with Ryobi tools!
To check out any of the tools featured in this video, please visit the affiliate links below:
Ryobi Super Charger - amzn.to/3NLaMJy
Ryobi 3ah Battery (batteries are way overpriced on amazon, I've used generics with success) - amzn.to/3JubwAc
Ryobi 4ah Battery - amzn.to/3NMuEfB
Ryobi 6ah Battery - amzn.to/44b8dWy
Ryobi Palm Router - amzn.to/44ixoX9
Ryobi Plunge Router - amzn.to/3NJ2jFN
Ryobi Fixed Based Router - amzn.to/3Ns64im
Ryobi Router Table - amzn.to/3NMCBRY
Ryobi Drill and Driver Set - amzn.to/3CLne5R
Ryobi Drill Press - amzn.to/3J4ysG6
Ryobi Table Saw - amzn.to/3pk41oO
Ryobi Miter Saw - amzn.to/3NKLSdb
Miter Saw Laser (After Market) - amzn.to/46oEuLF
DeWalt Miter Saw - amzn.to/46d9Bd4
Ryobi Band Saw - amzn.to/3CPjy2M
Ryobi Circular Saw - amzn.to/3CLxXgI
Ryobi AirStrike Brad Nailer - amzn.to/43Xmiaz
Ryobi "Dremel" - amzn.to/3NVa0dj
Ryobi Flashlight (Large) - amzn.to/43XF0i6
Ryobi Flashlight (Small) - amzn.to/46n9xHE
Ryobi Buffer - amzn.to/42Yti5J
Ryobi Reciprocating Saw - amzn.to/43X0snl
Ryobi Multi-Tool - amzn.to/44esD0N
Ryobi Converter - amzn.to/3qR8tvu
Ryobi Leaf Blower - amzn.to/43TB0iT
My favorite tools you might see in my shop:
Major Tools:
Jet Bandsaw - amzn.to/3IhIvHP
Nova Voyager Drill Press - amzn.to/446gHhH
SawStop 3HP - amzn.to/3XeN9dL
DeWalt Table Saw - amzn.to/3YuRWsU
Festool Kapex - amzn.to/3JNvYNG
Dewalt Compound Miter Saw - amzn.to/3JLyxj3
Jet 8'' Jointer - amzn.to/3I1NGvf
DeWalt Thickness Planer - amzn.to/3X91dWg
Shelix Cutterhead for DeWalt Planer
DeWalt Router - amzn.to/3Ypl84o
Bosch 2.25HP Router (In Router Table) - amzn.to/40TeIfD
Kreg Router Table - amzn.to/3ljpbkg
Kreg Router Lift - amzn.to/3liJMFK
Festool Cordless Track Saw - amzn.to/3DKiFtk
Festool Router - amzn.to/40LHL4B
Festool Carvex - amzn.to/43h1zyv
Shaper Origin - amzn.to/41fO3cq
Shaper Workstation - amzn.to/418VqlS
Measuring/Marking
Woodpeckers 642 Square - amzn.to/3wY94vl
FatBoy Pencil - amzn.to/3IxstIK
Woodpeckers TS 32 T-Square - amzn.to/3Gvmx2H
Paolini Pocket Rule - amzn.to/4194fw6
1-2-3 Block - amzn.to/3A2CRUY
Finishing/Sanding
Festool 5'' Sander - amzn.to/3RC4a0o
Festool 6'' Sander - amzn.to/3jD7coG
Rigid Oscillating Belt/Spindle Sander - amzn.to/3MCGjNw
Jet 1632 Drum Sander - amzn.to/40RXejN
Joinery
Self Centering Dowling Jig - amzn.to/3Xaapd7
Kreg Pocket Hole Jig - amzn.to/40Ksf9E
Festool Domino Joiner - amzn.to/3YaqG32
Drills/Drivers/Nailers:
Festool Impact Driver and Drill Kit - amzn.to/3RBgga6
Ryobi Brad Nailer - amzn.to/3jyBCsf
Festool Compact Drill - amzn.to/3ZONw0d
Clamps:
Bessey Pipe Clamps - amzn.to/3JGk6gi
Bessey 12'' Quick Clamps - amzn.to/3DL1cAS
Bessey 12'' F-Style Clamps - amzn.to/3DLcMw8
Corner Clamp - amzn.to/3ITqm3B
6'' Jorgensen EZ Hold Quick Clamps - amzn.to/3zMymhs
Sjobergs Smart Vise - amzn.to/3zQLDVX
Safety
Milescraft Grabber Plus - amzn.to/3JKeJMW
Milescraft Grabber Pro - amzn.to/3JMkdai
Jessem Stock Guide - amzn.to/41PPn6I
Push Sticks - amzn.to/40zQpDr
Bow Featherboard - amzn.to/3q1qhn9
BiFocal Safety Glasses - amzn.to/3KljA65
Remote Switch For Dust Collector - amzn.to/3HJgdFF
Apparel:
Brunt Workwear (use code - FLYNNDOGG10 to get $10 off any order over $60) - bruntworkwear.com/flynndogg10
Other:
TopTes Moisture Meter - amzn.to/3LaLfYQ
Thanks for watching! :)
#flynndoggwoodwork
#woodworking
#amazingtools
#woodworkingfun
#woodworkinghacks
#woodworkingtips
#beginningwoodworking
#toolreview
#diy
#easywoodworking
#kapex
#festool
#dewalt
#ryobi
#ryobitools
#ryobi
For any dremel style sander, when you place the sandpaper on the cylinder, you have to then tighten the screw on the top. This causes the rubber pad to bow out and hold the sandpaper on the cylinder.
Thanks for sharing Sandy. I don't know if my pads or just to rigid at this point or if I'm just not getting them tight enough. I have similar issues with my ocillating spindle sander as well. I appreciate your comment and thank you for watching! :)
Yeah - this.
I haven't had any problems with the Dremel brand drums and sleeves slipping either. I have plenty of the Dremel accessory bits so I will continue to buy Dremel. I've seen recommendations to not buy the Ryobi drill driver bits. I have difinately been through several of the phillips bits supposedly made for impact drivers. The tips do not hold up.
Multi tools are incredibly handy, but more often for renovation or demolition work than furniture and other projects, which I call more woodwork than carpentry (if that makes sense). And perfect for removing cornice or skirting boards without damaging them. The amount of times I throw it in for the sake of it on a job, then end up being grateful I did is countless.
With your Dremel style tool, you MUST tighten the screw in the end of the drum once the sanding tube’s in place. This tightening expands the rubber drum which then holds the sandpaper firm.
Your plunge router didn’t really look unstable, plus you were wobbling it at a height it doesn’t get used. The lower you push it, the less flex you’ll experience. Better to actually use it before suggesting it’s no good. That was an inaccurate assumption to suggest not buying one again. Replacing it without giving it a chance was self inflicted injustice to a pretty good bit of gear 😉.
@@fleebee3639 That's great information to know. Sounds like dremel is the way to go. I'm going to upgrade mine with some dremel brand to see if it improves the performance! Thanks so much for sharing!
Excellent and honest review. Didn’t sound like a Ryobi factory rep who was pushing the entire line. I have a mix of Ryobi and Dewalt power tools. The birds don’t care which color tool made their feeder or house. LOVE your channel!
Thanks so much Louis! I'm kind of the same way, I've got Ryobi, Dewalt, Makita... and of course Festool. All of them serve their purpose, and I honestly don't have too many duplicates! Thanks for watching and thanks for sharing louislandi!
Congratulations on the 1 year anniversary. I'm not a Ryobi guy, mostly because I went with another battery platform to be consistent with the rest of the equipment on a job I was doing. You are right about the reciprocating saw I don't use it much for woodworking, but it is used a lot around the house and when I'm demoing. My oscillating saw isn't used often, but it is a life saver when I need it. Keep up the great content, and enjoy the weekend.
Thanks so much Pat! You have a great weekend as well! Those darn batteries kind of define people so early in which tool they go with. When you are first starting out, you don't realize what a big decision that is! Thanks for watching! :)
The oscilating saw is a super useful tool when you start using. I would call it my third most used ryobi when doing remodeling.
I had had tremendous success with that tool as well, until this weekend. I was demoing a deck and it started to smoke on me. Now, I was putting it through a lot, so for it's price point, it did the job, but for my next big project I'll probably need to get a more powerful tool (or not put so much pressure on it!) Thanks for the comment and thanks for watching! :)
Brian,
On your review, I ordered the Ryobi battery Super Charger. Came yesterday, unboxed it today and set it up in my shop.
That is one sweet charger! I loaded it with 6 batteries and checked the progress throughout the day. Your review convinced me to order it. Thank you again for the honest and helpful info!
Haha! Glad you like it! I love mine. A lot of people were complaining about it only being able to charge one battery at a time, but I've never had that be an issue. Not once have I burned through all my batteries in a day. I just plug them in if they die, pick up a new one and move on. By the time I need a new one, all the batteries are fully charged. you'll really like it! :)
@@FlynndoggWoodwork Brian,
Some people would complain if it was free and came with 6 batteries! Including tax, mine was $76 and change on Amazon.
@@louislandi938 I know right! :) Mine works just fine for what i need it for!
Have an almost identical work light to the one shown at @15:10 though it's only on/off; the killer feature for me is the ability to plug it in to mains instead of using a battery, in addition to the quite versatile options for hanging it in various places.
I also have the palm router and found out the hard way about needing to really tighten that collet...
Overall I'm very happy with Ryobi - I have about 12 tools, and my biggest issue is that when using my chainsaw the batteries get so hot they have to cool down for half an hour before they are able to be recharged. I did go for the One+ 18V chainsaw to avoid getting into another battery system, and except for the hot battery issue it's worked very well. Now with the recently announced 40V log splitter I'm thinking I might have gone for the 40V system if I was buying a chainsaw today... In any case I had just bought a cheap mains powered hydraulic splitter when I saw that announcement, so I dodged that (expensive) bullet 😅
Man oh man! I had no idea they were going to come out with a splitter. I haven't had an issue with the batteries overheating myself, but I have heard other people having that problem. I have the 40V batteries as well. They seem to work fairly well although I have had to replace a couple over the years. I've gone to buying knockoffs online vs, the real ryobi brand as I can't justify spending over $100 for a battery. I've got a cheap hydrolic splitter too, it does the job for what I need it too, but it can't get through those really thick logs, for that, its back to the axe! Thanks for sharing and thanks for watching Koma-K!
Seems I made all the right decisions for my Ryobi spread. I've bought all the good ones you recommend and stayed away from the others. Subbed!
Man! You have a great eye for selecting the correct ones! So nappy to have you sub! Thanks so much and welcome! :)
Great explanation of each thank you
Thanks so much for watching jrdego!
Congrats on the 1 year anniversary!!! The 12” and Dolly clips were gold 🤣 The multi tool I use for flush cuts. Grab a deck of playing cards and use that on the surface to protect it while cutting dowels or inserts. I then sand the rest off. The palm router is great for me. I actually have to use pliers to get my bits out even when I loosen the collet. It’s crazy but it works great for me. I do understand the concern though. I do need a standard router cause the palm can only do so much. The table saw I had the same issues. I still have it as I use it for mobile rough work and flooring. I have a HF drill press but I got it for $25. It does what I need for now but the next few tools will be a band saw, new miter saw and whatever else the wife allows lol. Again a great video and glad to see you growing. Take care and God bless!
So good to hear from you sneakyhippo! glad you liked the dolly clip and the "12 inch" clip! I find myself on tiktok and watching a lot of youtube shorts these days trying to find funny little add ins! Thanks for sharing that info! Love the idea about using the multi-tool for flush trimming! I've seen people do that, but never actually tried it myself. I bet it works awesome! Damn you got a steal on that HF drill press! :) Thanks for watching and have a great weekend! :)
@@FlynndoggWoodwork Do you know if the palm router issue was fixed in later models? I've also had no issues with the palm router in the 6 or so months I've had it, but I've also been pretty much exclusively using it in a small router table so that probably keeps the bit more stable. I had no idea this was a known issue until now.
@@thewhitestarsarefake Yes! Great question. From everything I've heard all of the new models now have a much better collet system and there aren't any slippage issues. I would recommend the dewalt palm router though if you are in the market for a new one. That is the one I almost use exclusively and I love it!
I have several blue ryobi tools (like 20 years old ) and they still work . Using the new style batterys though
That is so good to know! Very cool that you still have the blue ones. Thank you so much for sharing and watching Joelstanhope!
Older review but as a new homeowner I appreciate the honest review!!! Cheers!
Thanks so much Johnny! Best of luck and congratulations on the new home!
Great review on multiple tools
Thanks so much! I appreciate that and thanks for watching!
Good reviews. I liked your concise, thought provoking opinions and recommendations. I'm on the DeWalt platform for the same battery reasons. Like your videos. 👍
Thanks so much ronallman! I've got 1 dewalt battery operated tool, and I love it. Problem is, I've lost my dewalt charger! Probably need to just bite the bullet and buy another battery/charger combo! Thanks so much for your compliments and thanks for watching!
I am a Ryobi tool man myself So far all the the Ryobi tools you would buy again I own myself. The ones i was considering you said no to. Thank you very much!
Oh nice! Glad I could help. Thank you so much for watching and sharing James!
I have been using Ryobi for years, since the dark green machines and the black and yellow ni cad batteries. I still have and use a couple of those 1/2 inch drills. And they work great with the new batteries. I doubt that I am the only one still using the original tools.
That's awesome! And great to hear. I'm hoping that I have a lot more years left on many of these tools! Thanks so much for sharing and watching!
I enjoyed the video. I appreciate you sharing your experiences.
I bought my first Ryobi kit when the tools were blue and the batteries were Ni-Cad. I am a light duty user and they work fine for me.
Ryobi has released improved versions of some tools but i can't justify upgrading. These include the drill/driver, the circular saw, the reciprocating saw, the 6-port charger, and the 40 volt chainsaw.
I have the earlier 6-port charger. It works well and i dont have a problem with it charging the batteries one at a time.
My 40 volt chainsaw is a nice pruning saw but it cannot use the larger batteries. The new chainsaw can accept larger batteries.
Thanks so much for sharing Bob! I actually love my chainsaw. I've cut down multiple trees with it in my yard. Does the job just fine. May take a battery or two but it gets the job done. That's awesome to hear you are still rocking out with the old blue batteries. If it ain't broke, no need to fix it! Thanks so much for sharing your experiences!
My blue Ryobi recip saw still works great, and some of the pruning blades that are out now are simply amazing for yardwork. My original 6-port charger died but the replacement (what Bryan showed) has been going strong for years. My only real disappointment with their tools has been the small (5-1/2 I think) circular saw, no torque no matter what battery I use. I have their palm sander and their trim router, no issues with either.
@@wpierce34004ever sounds like we have almost the exact same opinions on these tools. When I recently demolished a deck in my backyard, even the 7.25 circular saw had a hard time keeping up. Its a tough one. I think having a corded circular saw is still a necessary for larger projects like I had. THank you so much for sharing. Always appreciated!
Great video - I’m new to the Ryobi suite of tools and your video helped to understand some of the tools. Question: is there a Ryobi tool to charge a Ryobi 18v battery using your car lighter? Thx!
That's a great question. I just looked on amazon and found this one: amzn.to/3UdzJ3J
I don't think it is made by ryobi but it looks like it might work! Thanks for watching Carlos!
Loved your video yes buddy about thst screw on top of sanding dice all brands are like that. Same as tighting a boat plug in
And on your inverter they have one now that will take up to 8 batteries but only needs one. To run it. They also have 40 volt system as well
Awesome! Very cool that they have an 8 battery inverter! I would have loved to have had that. I've since got a solar powered power station that seems to do the trick! Thanks so much for watching and sharing Mark!
For the rotary tool, the issue is the attachement, not the tool itself. I highly recommend the Dremel EZDrum, you can change sanding drum without the need of a screwdriver, just pull and press!
Awesome thank you so much for sharing! I’ve only been using the attachments that come with the tool and it sounds like that is the problem. Another person has also made a similar suggestion, thanks so much for sharing!
Or you could just screw it up tighter and expand the rubber. If the screw bottoms out, grind a bit off the shaft or add a small washer.
@@GBCobber Great idea, Thanks for sharing GBCobber!
Or you can buy a few rubber drums and marry them with the sandpaper rings, so only one change is needed! But I like the idea of just a shaft and changing the drums only!
Great video and nice run down of all tools. In all honesty, I'm no pro and mostly a week-end hobbyist when it comes to woodworking. But I find the whole "battery platform" to be another way for compagnies to make people brand loyal. I own Dewalt, Porter Cable, Ryobi router, Ridgid and other brands and I get the tool I need when the price is right. All my tools are either corded or battery and when I buy most battery tools, they often came with 2 and sometimes 3 batteries, like my Porter Cable drill and impact driver. So having a few batteries for each tool, never limited me to one brand.
I think this is a great idea Joey! Have a just a battery or two of each brand really opens up your possibilities with tools. Thanks for sharing and watching!
I love my cordless Ryobi tools. I have used them for quite a few years. Some of them are so old they are the blue plastic, not the neon green. I have had great luck with the trim router. It has gotten a heck of a lot of use. I did get HP models for a few of the tools based on the great reviews. Love the jigsaw. Definitely a Ryobi fan after having had such a great experience with them. If I didn't go with Ryobi, I think it would have been Milwaukee.
That's awesome, thank you so much for sharing your experience jonathan. I love hearing stuff like this. Sounds like you've been using them for quite some time, so I respect your opinion! Thanks again for sharing!
I standardized on Ryobi for the battery platform also. I do use my saber saw and oscillating saw all the time in renovation projects - and wouldn't even try without them. I agree, though, it is a no for fine woodworking!
Haha! You sound like me. My ryobi tools take the brunt of my renovation projects. I will give them kudos for taking a beating. I've dropped both my impact driver and drill from a 2nd floor and they took the licking and kept on ticking! Thanks for watching Doobiedoghousewilson! Love the username!
We love your videos!
You are too kind Aprillagilsdorf! I've got you entered as well! :)
Awesome job!
Thanks so much Damien! Loved your latest video, just got done watching it. You're going to love the 735!
I agree on the drill/driver. 3 or 4 years back I got the deal from Home Depot, got the drill and driver and another drill for backup with a 2nd fast charger and 3rd battery. Very straight forward but they're all working fine instead of having the little issues that so many cheap drills end up having. Just medium home use, but no issues and I expect they'll last 3 or 4 more, and probably longer with only swapping out the battery cells.
Good to hear you have had success with the drill and driver as well. They really are my main drill and driver set, when I'm doing anything household related or work related. I tend to go with my festools when I'm doing "woodworking" but I'm not sure if that is because the work better, or if it is just because I bought them for that, and I feel obligated to use them for that purpose. Thanks again for the comment and thanks for watching! :)
I switched to Ryobi when all my DeWalt 14v NiCad batteries all died within a few months of each other (after 5 or 6 years of use) and I could not afford to stay with DeWalt (at the time each DeWalt tool purchase included a battery while Ryobi had a 'bare tool' option). I only do minor DIY and smaller furniture projects for the house, so while I really liked my DeWalt cordless tools, the Ryobi tools have been fine for me..
BTW - I completely agree with your assessment of the Ryobi table saw. I bought on and it scared the hell out of me every time I turned it on. I ended up with a Rigid R45171 and have been very pleased with it so far.
That's awesome Jim! Thank you so much for sharing. I think Ryobi is an excellent brand for the purpose you are describing and beyond. It really is a shame that all these tools are so expensive with their batteries. We need Elon Musk to buy a tool company and revolutionize the battery design and economics. Hell, he probably already owns one :) Excellent choice on the new table saw! It's a miracle that I only had one kickback event with my ryobi table saw. It still bruised me up pretty bad when it happened. Thanks for watching! :)
Great video! I am a big ryobi fan. My favorite tools are the cordless nailers and stapler
You and me on the nailer! I'd love to get the stapler! Glad to hear that is a good tool as well! Thanks so much for watching Joel! :)
My Ryobi nailer always tries to send 2 or 3 nails through at a time. I'm forever taking it apart and removing excess nails
@@peterzammit9029 Really! That's good to know. It seems like this is a common issue with Ryobi. Some people have great success with a tool while others hate the same tool. That Ryobi nailer has worked like a charm for me, but I get it. I think with higher end tools it seems like there is more consistency and everything coming off the line is to the same quality.
I want them but 2 expensive still
@@dmo848 I hear you. I haven't had too much success with it, but facebook marketplace and craiglist sometimes has some great used tools that actually are probably better than most brands. Also garage sales a great idea too!
Awesome info video. I'm just starting to transition, sorry 😔...to battery powered tools. I've chosen the Ryobi line too for it's versatility. I have the hedge trimmer, impact driver drill, the standard drill plus numerous batteries and charger packs. Ryobi was having a deal during 4th of July...so I took advantage. Like the way you were straight to the point and matter of fact. Love the plug in shots too. I'm not in the professional wood working business, just a diy guy. I'm so far, very satisfied with my Ryobi selection of tools. I took think the 4ah batteries are better. Great 👍 job!!
Thanks so much James! You sound a lot like me. I love Ryobi for their versitility of tools. It really is quite amazing what you can get these days that is battery operated on their line. I really like their yard tools. I've been collecting those over the years, and have no complaints at all. Thanks for watching and commenting! :)
U will find out they r freaking awesome every damn till I have from them. Slowly built over about 15yrs. Yeah they been around that long
@@dmo848 Awesome Dmo848, thank you so much for sharing. I've been pretty impressed with almost everything I have gotten so far. especially at the price point! Thanks so much for watching and sharing!
Great video. I was always interested in the Ryobi brand. I like how you can use the same battery in most of the tools. Only thing is, It will be hard for me to steer away from my Dewalt tools.
Oh I hear you! I actually wish I would have started out with dewalt. Ryobi is nice because they have more selection of tools I think, but dewalt is just a little higher quality, I think you made a great choice going with dewalt! Thanks for watching Micheldequatro!
Like your reviews thankyou. On my Ryobi dremal tool one of the small rubbery arbors has a screw hole in the top and a small washer with a screw that goes in that hole as you screw it in the rubber expands a little and grips the inside of the sanding drum . Holds quite firmly in fact they are hard to get off but they do work very well . I use the tool often .
Thanks so much for sharing! I've tried to tighten down that little screw a few times, but still had slipping problems. I wonder if mine just got too dry or something and doesn't flex out enough. Thanks so much for sharing and watching!
For the reciprocal saw I drive a roll off truck and carry one everywhere.
It is my go to tool to cut boards, rebar, roofing, flooring or anything else sticking out tge side of the dumpster.
Even ride with charger to keep battery fresh.
That's awesome shakeyjake! It's such a versatile tool, and sounds like you are using it as it was meant to be used. Thanks for sharing, love hearing peoples experience with different types of tools!
this video is great but what are some budget tools that are not too bad?
Well, Ryobi is what I would consider budget tools. You can also go with tools like Rigid or Kobalt, or even Hart (Walmart), but I don’t have any experience with those brands. Maybe some other viewers could comment and leave some ideas? Thanks so much for watching!
i have been using Ryobi since they were blue... Still have drill , reciprocating saw and circular saw over 20 years old and still work great.
That's great to hear Joseph! Really a lot of high qaulity tools they make for the price. Love the fact you have some from their blue days! thanks so much for watchign!
The earlier blue Ryobi table saw was very precise.
Oh good to hear. It sounds like ryobi had a higher quality product before they went green. Thanks for sharing and thanks for watching!
When I purchased tools to renervate house, I chose cordered Bosch, a big mistake as within 3 years most failed, so I chose the Ryobi battery platform to replace them. I haven't regretted this decission as these tools are fit for purpose
Thanks so much for sharing that william. I love hearing people's real life experience with these tools. Really appreciate it!
Good video thank u
Thank you for watchign ramboexcess!
Que buen video, no había encontrado alguien que reseñara tan bien las herramientas, me gustaría que analizarlas toda la línea HP, y gracias por tener la opción de su subtítulos en español. Saludos desde la ciudad de México.
¡Muchas gracias por mirar! ¡Es genial ver a gente de todo el mundo viendo estos vídeos! ¡Gracias de nuevo por mirar!
I saw the review on the Ryobi Trim router. Not sure why you're having this issue but I love mine. Never had a bit so much as loosen... Are you sure you are using the correct size collet for the bit?
Great question sociopathmercenary, It sounds like they have since updated the collet system since i purchased mine. I'm guessing you have the new collet system. Excellent question.
The appearance of the oscillating tool on the jobsite after 2009 when the Fiene patent expired has been revolutionary.
There was simply no tool beforehand that would cut cleanly and quickly straight in.
Every carpenter I know has two and loves it , including me.
Good to hear! I like the tool as well. Just don't use it enough. I need to grab it more when I reach for things like my flush cut saw. Thanks so much for watching Robby!
congrats! I use my multi tool for plunge cuts, getting nails and such out of wood, and sanding.
You know what when you were just saying you use your multi-tool for plunge cuts, it just made me thing it would be a great started to get a jigsaw into interior cuts without having to plunge the jigsaw or drill a hole. Thanks for sharing and thanks for watching!
I use the ryobi 18v stapler often. It makes assembling furniture way better.
You know that is one thing I've been thinking about getting! That is the nice thing about Ryobi is the large variety of tools they have! Thanks for watching madbr!
Thanks. And I was getting ready to buy a drill press to. I have a smaller circular saw and the only thing it would be good for is maybe cutting cardboard I never use it and I do have a 2 other corded saws testing use all the time. The Oscillating multi tool I use it a lot and love have one the battery powered one is a game changer for me.
That's awesome! Love to hear peoples experience with these tools. That Drill press is good, just a little underpowered. Now that I have a work horse for a drill pressy I can really tell the difference. I was having all sorts of problems with the Ryobi with my forstner bits and it would actually seize up. Never have that problem anymore. Thanks so much for watchign!
Great video
Thanks so much Jim! I appreciate you watching!
Great guide to Ryobi tools. For the money they are really good. Just some tip on your video quality especially on the close up intro. You should adjust the exposure settings a bit. It's way bright and shiny parts of your face looks white. When it comes to the wide angle shoots try to avoid having any direct lights in the frame since it will mess with the auto exposure settings and make the rest of the image look flat.
Thank you thank you thank you! I love getting suggestions like this. I know nothing about photography, so I really appreciate it. Those are all excellent points and things I've noticed as well. The intros are always a struggle because of the green screen. Still trying to figure that out. You have to have the green screen light enough so that there are no shadows, but as a result I always wash out my face. Excellent point on trying to avoid direct lighting in my shots, I will try and do that on the next video. I'm filming on my iphone at the moment, but hopefully will be able to get a real camera sometime in the future. This is all very new to me still so really appreciate your suggestions!
I have several dremel and rotary tools from different brands and the sanding barrels are always the worst part. If you get into carving the rotary tools are great. The other thing with rotary tools is they are useful for tons of other projects other than wood working i just used mine with carbide bits for cutting the tiles while redoing my shower for around spout, diverted and handles.
Awesome! Thank you for sharing. You know I'd love to get into carving, I've been actually thinking about practicing on shaping a chair "butt-rest"... not sure what you call that (seat). I have a little handheld battery operated tool that actually uses bits to sand and shape, that I think I would use if I had to do that Christmas project again. Thanks so much for watching! :)
I used the power inverter to run cheap LED flood lights, it is actually cheaper to buy a 10W LED flood light plus the inverter then a dedicated Ryobi light. But it has less runtime then a dedicated Ryobi light.
I also use the inverter with a small heat blanket.
Or combine it with a powerful laptop charger.
The Ryobi Compound Miter saw is pretty awesome. I was surprised how great the shadow line works, and the power.
Great to hear Joe! Thanks for sharing. I wish I would have gotten that one off the bat, but it was one of my first woodworking tools I ever purchased, so I was pretty price conscience at that point. Thanks so much for watching!
@FlynndoggWoodwork I completely understand. I was replacing a 20+ year old Delta when I upgraded. It was a chunk of money for sure, but I'm glad I stayed green. I'm always on the lookout for channels like yours, they inspired me to start my own, so great job!
@@JoeTheDIY That's awesome, Go for it Joe! It's a lot of fun, but also a lot of work. As soon as you upload a video, it's time for the next one! :) Thanks so much for watching!
Great video Flynn. Question, what are your thoughts on the new One+ HP Brushless tools? They are pricey, and it just seems like other brands have better performance for the price. I am trying to describe if I should get into Ryobi. Some people thing the new Ryobi stuff are overpriced and underperform, especially the batteries. What do you think?
Great question. If I were to do it all over again, I would probably get into a brand like dewalt. I've been really impressed with their tools since I bought ryobi. The one thing that Ryobi does have going for it is the number of tools they offer with their infrastruction. There is just about any tool you can think of and then some. Probably a little wider variety than any other I've seen.
I never had an issue with my Ryobi palm router, but I also have a Kobalt one that I use most of the time
Good to know Ericricker! I think it sounds like ryobi might have updated their collet system. At least that is what some other people were saying. Mine doesn't have the traditional collet that most routers have. Thanks for sharing and thanks for watching!
Duel welding the leaf blowers. That is some real man cleaning right there haha
haha! You got that right! Thanks for watching Andy!
Reciprocating Saw saw might need oil on the gears, bone dry on new ones and it will make it last longer, might want to check yours
Great idea thanks for sharing u4eagun! I need to take that thing apart! Thanks so much for watching!
What's your take on the mini chainsaw?
I have the 18'' chainsaw and love it. I have a couple of other handheld versions but those are from some cheap chinese company. I've never been disappointed with any of the electric chainsaws I have, I would highly recommend!
Thanks dude.
love most of my cordless ryobi tools, one thing love they have so many other none woodworking tools that run off same battery system like grease gun, brad nailler, whipper snipper, pressure washer, water pump, workshop blower, power inverter etc. the problem with your ryobi dremel tool is you when put sand paper on there is screw on front you tighen it down to expands the rubber out to hold the paper, back the screw off again to change out sand paper.
I agree with you on the selection of tools that ryobi has, it's great, from shop projects to yard work they have you covered. Great suggestion on the dremmel. I've tried really tightening up that screw in the past, but still had the same problem. I'm wondering if since I had this thing stored in a non climate controlled area if the rubber on it just got damaged and that is the reason it is not fattneing up and tightening the sandpaper on it. Excellent suggestion though!
On jobs in dirt and water doing plumbing that sawzall is our go to saw. Only broke 1 in over 10yrs n that was cause it was under water cutting
Good to know dmo848 and thanks for sharing! I actually have had really good success with it until last week when I was demoing a deck. I was really putting it to the test and it started smoking a bit, but I set it down for a bit and it continued to work. Thanks so much for watching!
@@FlynndoggWoodwork I will say ours are the older style. The newer ones seem not as well built. But still really good. I just bought another last year for myself. But really only cut trees n such with it. Never got to really dirty it up yet. I've always had the Milwaukee sawzall plug in for that. She's the ripper upper
@@dmo848 Oh I bet that milwaukee kicks butt! It really seems like a crap shoot now a days with some of the tools!
@@FlynndoggWoodwork yeah. I think we got the better tools back then. They were built to last. Honestly I don't think they test any of the new stuff. 2 worried about getting the products on the selves.
I recommend that you make a few wraps of a good vinyl electrical tape around your rubber barrel sanding attachment. If you can get the arbor to expand enough, I'm sure the sanding barrel won't slip. You have an "attachment" problem in this case, not a "tool" problem. Try using the "tool" for the 3 or 4 dozen other tasks that it's meant for and I think you'll find that it is irreplaceable, generally, although maybe not in a woodworking shop. This was a great video, BTW. I liked the theme of it a lot and want to thank you for making the content.
You are too kind mrhalfstep! I love the idea of the electrical tape around the rubber barrel. I will try that next time I use that dremmel. Thanks so much for your comments and really appreciate you watching!
I went with the DeWalt 20v lithium battery infrastructure. I was seriously considering Milwaukee, because I loved my Sawzall and sander, but Milwaukee let me down when their angle grinder had a premature gear failure. I've been very happy with my little DeWalt family of cordless tools.
That’s great to hear Matthew! Dewalt seems to be such a quality tool brand for the price. I’ve never been disappointed by anything I’ve purchased so far from them, however I’m sure they have some tools that aren’t perfect. Thanks for sharing and thanks for watching!
When you tested your cpap with the inverter did you turn the heater off on the cpap? The water tank heater uses most of the power when it's running. I bought one for the same reason and haven't tried it yet and when you said half an hour on a 6 amp I was very disappointed to hear that, so I'm hoping it's the heater thing that uses up most of the juice.
Oh great point! You know, I'm not 100% sure I did or not. That would probably make a big difference. I feel like I turned off the humidifier all the way, but I can't remember exactly. Thanks so much for watching!
After my impact driver the oscillating multi tool is my most used tool its in near constant use , if not by me someone else has borrowed it
I hear you. It’s a toss up for me on the impact driver or sander. I 100% agree with the brushless comment. If you can that’s the way to go! Thanks so much for commenting and watching!
I use the ryobi line for things like fans, lights and I did get their 18 gauge nailer which I think is great I started with craftsman but have since switched to the other red tools.
I’ve learned the motto buy once cry once is definitely true 🤦♂️
Love that saying. Wish I would have thought through my choices better in the beginning. Love Milwaukee. Really all of these brands are making quality tools at this point for the most part. Thanks for sharing and thanks for watching baddog! (you need to add another g to the end of your username! :)
@@FlynndoggWoodwork I think ryobi is a good brand to make sure you like making, it just dawned on me that they both end in dog/dogg 😂😂
@@baddog4347 Haha! :)
Same here, most of my "real" cordless tools are Milwaukee or Makita, but I have a few Ryobi flood lights, a spotlight, their inflater, palm sander, hot glue gun, flexible shaft rotary tool and 2 of their cordless nail guns.
I use the same battery structure and have stuck with it. If I was starting out fresh, I would probably step up to Milwaukee tool or Makita. But Ryobi seems to be good enough for what I do.
100% agree with you georgequalls! I'm the same way. Not disappointed, but wish I would have put more thought into it in the beginning! Thanks for watching!
Your legally allowed to own more than 1 battery platform, I'm on 3 myself, mostly Makita (10 batteries) but I also have a 3 Ryobi and 3 Milwaukee batteries (although I could use a couple more Milwaukee batteries I have quite a few of their tools now and I do run out from time to time), and when I am choosing a new tool I choose my platform based on how good the reviews for the tool are, how often I think I will use it, what my budget is etc.
@@legallyfree2955 I always wondered if it was legal to own more than one battery system! :) I used the hell out of my ryobi tools this weekend when demolishing our back deck that was rotting out. I was horribly disappointed with my ryobi tools that I used. Specifically the circular saw and the reciprocating saw. I actually burned up my reciprocating saw and smoke started coming out of it. the circular saw couldn't cut all the way through the rips I was doing. I even told my wife, I think I need to move over to another system, which I'm going to next time I buy a tool. Believe it or not the real champ in the demolition was a brand called "task force" It was a corded circular saw and it got me about 90% of the way through the demolition until it too burnt out on me! But it was a champ until it died.
Good one, Brian. I’m “green” with envy.
Haha! Thanks as always for watching Paul!
I have almost 2 dozen Ryobi tools and most of them I would buy again.
The worst one i have is the 18v portable planer. It either takes off too much or nothing.
I really like the little Bluetooth speaker because it has a fairly long range. My favorite is the misting fans. I have 2 and use them on 5 gallon buckets.
Ive been using Ryobi since 2008. Not for big power tools though. Like a table saw and etc. I use the DeWalt 7491 because of the dado ability.
Excellent point on the table saw, that was another reason why I outgrew that table saw so quickly. No dado for the Ryobi unfortunately. Went straight to dewalt to get the dado capacity! I think that is a pretty smart approach to stick to the hand tools with Ryobi. And OMG, I had no idea they had a misting fan. Guess I need to get another Ryobi Tool. Its hot as F@#K in my barn right now! :)
@@FlynndoggWoodwork , the misting fan is awesome. Takes a 18v battery and you can even hook it up to a garden hose. Love it.
@@a9ball1 you've sold me on it! :) I'm getting one
I'm also in the Ryobi ecosystem.
My main problem with the Ryobi palm router is it gets very hot in short usage.
Mine does too! Thanks for sharing and I'm with you on this ryobi ecosystem! :)
My first Ryobi tool was the hammer drill. I killed it making a deck.
I have random orbital sander and jigsaw which get the job done. But my 1.3 Ah battery is a severe limitation.
I use my ryobi 12 v multitool for plunge cuts (even in fine woodwork) and cutting screws and nails. They have their place.
Excellent! Thanks for sharing. You know the more comments I read like yours, it makes me realize I left some of my tools out. I forgot to put the random orbital sander and my jigsaw from ryobi in the video. Thanks for sharing and thanks for watching anthony!
The new palm router has a standard collet with multiple slits instead of the one. Haven’t had any issues with keeping bits in.
That's great to know ekd1985! Thanks for sharing. That's exactly what needed to be changed on that router!
Ryobi now have a power station that can fit several of the 40V batteries and give power for a long time. It's rather expensive though most portable batteri power stations are.
Awesome, thanks for sharing! Seems like everything related to the battery infrastructure is expensive! Kind of feels like the razor industry. They rope you in with a cheap starter pack and then charge you an arm and a leg for razors! Thanks for watching and thanks for sharing Dragonited!
Do they make a Ryobi chainsaw with battery
Yessir! I have one and it does a great job! You can usually get a mid size tree all the way down with one battery charge, if not 1.5. Great question and thanks for watching!
The sanding tool requires the screw in the drum to be tightened to expand the rubber in the drum
Oh I 100% agree. I've screwed that thing in about as tight as it will go and still luck. I've heard from other people that it may be the drums I'm using. I'm going to invest in some dremel drums to see if that fixes the problem. Thanks so much for sharing and watching thepubliceye!
The main issue you having with that dremel are the bits it is an amazing tool but i would look for carbite bits or wood carving bits I use the carbite bits on brass for fine adjustments to make them fit on a knife handle I also used it to carve siration on a carbon steel blade
Awesome thanks for sharing arbuckleworkshop! I always love getting recommendations like this. Sounds like I just need to get a higher end bit set and give it another whirl. Thanks for watching and commenting!
There are two Ultimate Repaire-Everything (URE) tools - Electric Tape and WD-40.
If smth has to move, but doesn't - use WD-40.
If smth moves, but doesn't have to - use Electric Tape.
So, for your "dremel" sander:
wrap your dremel with 1-2 layeres of Electric Tape before puting on sanding "cap". So when you'll be tightening "dremel", the elasticity of the Electric Tape will allow it.
LOVE This! I've never heard of that before! That is amazing saying and now I'm going to use it! Thank you so much for sharing, really appreciate it.
Yeah, avoid the table saws. I got my first blue Roybi tools as a Christmas present from my wife. The palm router is good, just make sure you have the right collet insert. There is a 6mm and a 1/4" . Using the 6mm will not hold 1/4" bits and they will fly out.. If you have doubts, there are OEM replacements. I have the Ryobi Job Max version of the multi tool with many different heads. Its great.
The nailers are great, I have the original 18g and a 23g nailer I use all the time.
I still have several of the original blue version tools as well that work great. My hand drill and first 5.25" circular saw have long been replaced with newer green versions. The drill press was great after I replaced the drive belt with a link belt, and the ban saw is fantastic as well, even after having to replace the rubber tires. . Even bought a blue re manufactured impact driver that is still going strong.
Mind you, I have Makita, Festool, HF, and Ridgid power tools as well, and you'll have to pry my Bosch 12v screw /drill driver from my cold dead hands.
Haha! I love this, I sure hope we don't have to pry that Bosch out of your hands any time soon! :) Sounds like you have a lot of history with Ryobi seeing as you got in when they were still blue. Thank you so much for sharing this. Love hearing about peoples experience with these tools who have been working with them for a long time! Thanks again!
I use Ryobi tools a lot in my shop. There is 2 points I need to bring to your attention. One is as far as the little drum sandpaper for the rotary tool, there should be a screw at the end of the ,bit to tighten to secure the sanding drum to eliminate the slippage. The second is that your not utilizing your multi tool to its full potential. There should have been a triangle attachment for sandpaper that came with it. This makes sanding in corners a breeze. I have around 30 Ryobi tools including a radio and I would purchase each one again. I to have the palm router. It's never done that to me. Check your collet on it and make sure it's not worn. You may need to just replace it.
Great points Deltonbray, I actually do still have the attachments to convert that multi-tool to a sander, but I also have a triangular oscillating sander as well, so I've actually never broke the multi-tool out for that. On the rotary tool, I've tried tightening it down, before but still encountered similar issues. I actually have a similar problem occasionally with my rigid oscillating spindle sander as well. Thanks for sharing your experience, good stuff, and thanks for watching!
You might try a strip of duck tape on the spindle it might work I never tried it. I have a Winn oscillating spindle sander and have experienced the same issue. I finally just put a little less pressure on it and took my time. It worked fairly well.
@@FlynndoggWoodwork I'm with deltonbray8880 try replacing your collet on that router. Should be cheap enough to be worth the experiment. It can make a world of difference.
And if you are unfamiliar with what a collet is, it's the little metal piece with the tapered tip that actually grips the bits. The nut tightens down on that tapered tip and forces it closed, if it is worn or defective it won't grip the bits and hold them in place.
@@tay13666 Thanks so much tay13666! Great idea on changing out the collet. Unfortunately, I've already moved on from that router, and now use the dewalt corded palm router almost exclusively (I really like the micro-adjustability on it, by just twisting the little ring) . I love that thing. It can handle both the 1/4'' shank bits as well as the 1/2'' shank bits. But great idea on switching out the collet!
better off having multiple single chargers so they all charge at the same time imo. usually get one with most deals anyway. Unless I guess you only need to charge one at a time. Worst part of my Ryobi recip saw is that you can't adjust the guard to shorten the blade depth.
Interesting, I never thought about having multiple single chargers, I guess I just didn't want to have that many cords and give up that much real estate for chargers. Great point though. Also great point on the reciprocating saw, I guess I didn't realized that other reciprocating saws had guards that allowed you to shorten the blade depth. That would come in handy I guess! Less chance to cut to deep and make a mistake! Thanks for sharing and thanks for watching!
I went with ryobi because of their battrry platforms don't change and one bat will run all. I went with a 9ahr to run the large radial arm saw. I had the small chop saw to build a stall for my horse. Problem was i had to flip the 4x4 several times to make a cut. Slowed my progress. I saw the ryobi radial mitre with 2 ports for 36v and bought it. Gads, what a difference. I also purchased a 2 pack of 9ahr to run it. If you mix different ahr bats as the lower drops out the saw stops. The only problem I've had wirh ryobi was the first recip saw began having that burnt smell as i used it when out at the barn. Took advantage of buy 2 batteries and get a free tool and replaced the older recip.
Thanks you so much for sharing Cliffowens! I really appreciate it and love hearing peoples experience with Ryobi! Sounds like you've made a great choice, and overall, I think ryobi is really underrated. Thanks again for watching!
You bet
With the circular saw, when I brought my first one, I did not realise that there are left and right handed versions...
Oh yes! Excellent point! Thank you so much for pointing that out! A very valid consideration before you purchase one! Especially if you do it online!
I love their yard and outdoor tools. The power source, is not to run a cpap at night...i bought mine to charge my phone. I bought the 40v power station to power up my cpap. Gotta buy the right tool for the job
Oh, I didn't even know they had a 40v power station. I'm not sure that was available when I needed power for my cpap, but good to know! I've had some real problems with my 40v batteries, I've literally had about 5 of them die on me over the last few years, and those things are sooooo expensive. I've turned to starting to buy generics, but I've had the same results with those as well. The tools are great though, no complaints here, just the batteries. Thanks for watching Steven!
I only see a Ryobi 6 battery fast charger listed at Home Depot.
Don’t see a ‘Super Charger’. Price is $99.
Is this the correct one?
Thanks!
Great question, you can actually get it for a little cheaper on amazon. Here is one that I found that is less than $70. But yes, it shouldn't be more thank $100, Not sure what home depot is selling for at this point, I got mine from amazon about 3 years ago:
here is the link!
amzn.to/46nHE2s
Have a great day Louis!
I see you saved enough money to invest in the seriously important tools. Festool miter saw and MFT. I think you also have a DeWalt miter saw. I've done similar. I watch all reviews of all tools I am looking to buy. If the Ryobi fits my use case ( not a pro) and does the job effectively and safely, I get Ryobi. The money I saved with Ryobi, I used to buy a Festool Track saw, Makita miter saw, deWalt impact drill ( more compact than the Ryobi). My next purchase will be a Makita compact circular saw. I buy the tool that best suits my needs based on good design, ease of use and safety. Ryobi is nothing to sneeze at. I recommend it to all my friends who just need tools for fixing things around the house, or support their hobbies.
That is the most perfect way to buy tools wrapped up into one paragraph I think I have ever seen! Thanks for sharing that. You hit the nail right on the head. Basically buy what works! :) Thanks so much!
I have several ryobi tools and not too many complaints ( the leaf blower sucks). My favorite and most used is the hybrid floodlight.
That's awesome to hear, thanks for sharing 1970 Gregg. It's funny that you don't like the leaf blower. That is one of my favorites, but I guess I haven't had too much to compare it to. Thanks for watching!
@@FlynndoggWoodwork maybe I should have specified it’s an 18v blower. I also have Milwaukee m18 blower which is excellent. My neighbor has the 40v ryobi which is pretty impressive and quiet
@@1970gregg Oh! That makes more sense. Thank you for sharing that as I have been intrigued with the m18 blowers. I'll probably stay away from them then! Thanks so much!
@4:02 if you are watching this on a Windows machine the tone that you hear is part of the video not anything being plugged into your computer all of a sudden.
That's Correct! :)
I Havent Had A Bit Of Trouble With Either My 18 Volt Or 4 Volt Rotary Tool. I Think Some People Don't
Know How To Use Powertools.
Well, I've heard from a lot of people that the rubber doesn't spring out enough for them as well. Even when I tighten it as hard as i can get it the drum still seems to slip. I have heard however if I get a nicer set of accessores it might solve all the problems. But yes I agree with you, not everyone knows how to use powertools. And I might be one of them!
Just found your channel. I was very interested because i have vastly bought into the Ryobi platform. I wouldn't have bought a few if the different tools you did like the drill press and table saw, but the one i am commenting on is the miter saw. You replaced it with a default, not a good choice. I will tell you i hate default and would never buy anything, because they are just high priced B&D in a yellow case, so when you said you replaced i was hoping you would have went with a quality tool like a Makita or a Bosch, heck even a Matabo would have been better than what you have. Sorry, but not sorry. I dont like replacing tools due to poor quality which us why i have a diverse and older mix of tools. I agree with you on the lights, they are the best. The buffer might be user error as i have used them and some are harder to handle. Looking forward to seeing your channel more
Thanks Darrell I appreciate you sharing that. I actually really like the DeWalt Table saw , I still have it and use it regularly. Right now I try and keep a dado stack in it so I don't have to switch out my other saw. I would have loved to buy the Bosch Table saw as my second saw. That was actually the one I looked at the most! What was really a game changer for me was upgrading to a cabinet table saw, but I had to start somewhere. Thanks again for watching!
Top notch basic saw
Awesome! Thanks for watching Niesha!
Once you start using the multitool it becomes one of the best tools in your arsenal. It replaces the sawzall in so many applications. More accurate and easier to use. Give it another chance.
You know you aren't the only one who has said that. I think I need to give it a little more respect and see where i can work it into my woodworking. One way might be as a flush trim saw. I could see it could probably do an excellent job with that!
For the price, Ryobi tools can't be beat. I have even gone to places like Craigslist to buy older Ryobi tools on the cheap. I bought an older Ryobi router table with an attached blue Ryobi router for about 25 bucks. It runs beautifully. According to the guy I bought it from, he claims he only used it to add a slight round over to his kitchen cabinet doors. I believe him, because the router shows very little signs of wear. I have a set of the same drill/driver that you have, but eventually plan to upgrade to the brushless set, because they are more compact, and more powerful.
For a beginner woodworker, even though they are not cheap, it is best to invest on a really good table saw like the Skil, Metabo or better yet the DeWalt. I have the DeWalt because it will accept dado blades, and also the rack and pinion setup is a great way to get extremely accurate cuts.
You are so right on all accounts Greg! Great points. and congrats on that excellent craigslist find. What a steal! I'm 100% with you on the dewalt table saw. That is what I got right after the ryobi table saw. That rack and pinion fence is amazing! I honestly wish my cabinet saw had a similar design. It is so easy to dial in those perfect measurements! Thanks so much for watching and your great comment!
@@FlynndoggWoodwork Maybe next year I will invest in a Sawstop due to the safety feature it offers. I may have to think hard about purchasing their new jobsite table saw, because it does have the rack and pinion style fence which we have all come to know and love. We shall see.
@@gregghernandez2714 Oh I know! That jobsite saw looks amazing! The price tag though! I heard through the grapevine that saw stop's patent protection on that technology is running out in the next year or two, so maybe we will see that in many more saws, or maybe even the price on all saw stops will come down!
For the multitool, after a ridgid monumental fail I switch to Milwaukee and... Wow... The Milwaukee is like a mini sawzall. I had difficulty to cut anything with the ridgid and it shake like hell... the Milwaukee just snoke everything like if it was butter. Not the same price but considering that I use it for pretty much anything now...
Thank you so much for sharing aquefaque! I love hearing real life experiences with tools like this. Thank you so much, and thanks for watching!
I did purchase the next inverter in the line. It lasted half the night with a 4ah battery.
Oh nice! thanks for sharing and thanks for watching Desertzombie!
I feel you missed Ryobi’s worst one 🙂, their jigsaw, which have such a sloppy tool holder guide mechanism that the blade walks all over the work piece, its foot is also hard to get set in the right angle although similar designs at competing brands works just fine. Okay, my jigsaw is old, but besides vibrating my hands numb, it can only produce firewood.
You know, that was totally one that i forgot to feature, Not sure why I didn't include tha tone. I definitely have it, and I have also not been that impressed with it either. The face plate moves on me all the time, so it's very hard to get perpendicular cuts! Thanks for sharing and thanks for watching bamsebrumbamsebrumen!
Never had an issue with the palm router. Never had a bit just come out and have hundreds of hours on it. Mine does look different though , so may be a different model.
Yep! I think that is the case. I have an older model that has a different collet system i think. I believe they have updated it since then. Thanks for sharing and watching ptmmatssc!
liked the video , but Whats the point in a six batteries charger if only charge one battery at a time?, unless is super quick I don't see the advantage..
Well for me it's having all of the batteries in one place, and knowing that the batteries that are not being used are fully charged. I don't think I've ever encountered a time when I have needed to charge more than one or two batteries at a time, so it hasn't ever been an issue for me. Probably not useful for someone who needs multiple batteries charged quickly. Thanks for watching leonangelarevalo!
I have many Ryobi tools and use the drill and flashlight most often. I am concerned about your review of the palm router which I have not used enough to know if the collet will loosen on use.
Awesome Jeffery! Yeah, that palm router scared me for life I think! I have since bought one of the corded dewalt palm routers and I love it. It is by far my most used router, except for maybe the Bosch in my router table. Thanks for watchign and commenting! :)
I have seen many reviews on the Ryobi palm router, and the most consistent criticism it gets is the fact that it is very heavy with the attached battery. Probably the best alternative is to get the corded DeWalt palm router. The reason I say get the corded, is because it will be very rare that you will use it out of your shop. It has a great micro adjustment to dial in the perfect cut on the material.
@@gregghernandez2714 I agree with you! I would get the corded, I've never had situation where you can't get a cord to it and you don't run into the problem with power drops from using a battery!
Why can't those multi-slot chargers charge all the batteries at once? It seems like with 120v coming in you should be able to charge more than one 18v battery at a time. I barely know an amp from an ohm, so if anyone can explain why, I'd appreciate it.
Great question. Wish I had the answer for you. I'm guessing it has something to do with cost savings, but I'm just taking a guess. THanks for watching bigredracingdog!
I use the 1 amps for flash lights
Great idea Poet! Thanks for watching!
My brother in-law is a Carpenter by trade and he uses all Ryobi tools just to prove a point that Cheep tools don't make you a bad Carpenter.
His collection of Ryobi battery tools and cored power tool is vast and only his main battery drill bearings are finally giving out.
Sure none of them are going to win on speed or power performance but he hasn't had any total breakdown or break apart tools in his 17 years of Ryobi Tool chouse for his work van
Bestline punch line he has, none of them asked to borrow his tools on the job site. 👍
I'm a Carpenter by trade also but I mainly own DeWalt but also have Black & Decker industrial, Skill, Milwaukee, Bosch,Ridgid, Hilti, Paslode,and Makita and my main hand tools are Stanley, Diablo, Irwin, DeWalt and Ridgid with Eastwing hammers.
I Know What Power tools work the best and fastest for the job at hand and last a long time. 👍
Carpentry: DeWalt, Bosch, Makita, Milwaukee
Plumbing: Milwaukee Ridgid, DeWalt, Makita
Electrical, Milwaukee, Ridgid and DeWalt, Makita
Sorry
No green or Ryobi old Blue power tools,saw blades,bits or hand tools on my work van or shop
I could never get used to the green and over all long term under performance of Ryobi tool over the whole spectrum of the tool line.
I did buy one time the Ryobi Black drill bit set and was not impressed at the longevity of the bits.
I only buy DeWalt Milwaukee, Makita or Irwin bits.
After all you stated another chouse above a Ryobi product would be a WENN product
LoL
WENN
The Long standing power and Hand tool company that produces power tool that are notorious to be in low in power, quality and performance products at the cheapest price posable
WENN TOOLS Never had a top of the line anything in it's Company's history.
And yes my brother in-law gets bested at any Ryobi Tool he has that the other Carpenters have in any other tool line on the job site.
But he likes the large choice of battery powered tools in the Ryobi tool line and the batteries and tools are cheeper then any other tool line,Well, except Harbor Freight or WENN?
I love this, thank you so much for sharing harvey wallbanger. Excellent points, and sounds like your brother-in-law has made some great choices. Thank you so much for sharin gand thanks for watching! :)
The 40V system is great!!! Leaf blower. Chain saw!!! Lawn edging tools. The snow blower! I even use the crap outta the 4-blade tiller.
I'm going to agree with you on this one Anthony! Almost all of my outdoor tools are the 40V system. The only problems I've had with those tools is the batteries themselves going out. But that is probably because I was storing them in an unclimate controlled area. That has been resolved now though. Thanks so much for commenting and watching!
What most people call a reciprocating saw, and mistakenly equate to a jigsaw or scroll saw, is called, more correctly, by folks in the trades, a demo saw, as in DEMOlition. It is mostly used for demolishing wooden structures. It's primarily for destroying, not creating, and as such, isn't a woodworking tool, per se. It is invaluable for its intended purpose and the Ryobi version is a good homeowner level tool. IMO The oscillating saw it also a special use tool. It is more for finish carpentry and doesn't belong in a woodworking shop. That doesn't mean it's a bad tool, just one that you don't need as a woodworker.
Thanks so much for sharing I appreciate that mrhalfstep! Thanks for watching!
For the supercharger, it's really just for those who have ton of tools (like you 😉). Otherwise, 1--2 charger will do the job and take much less space.
The palm router has been improved and supposed to be better and good (more balanced, etc.).
The dremel, get some Dremel (real brand) accessories. I avoid ryobi accessories in general.
Reciprocating saw, I bough a Diablo 30 cm pruning blade and use it to cut small branches or trees. They have two models. One to cut fast but doesn't make a cut as clean as the other one. So one for dead wood and another to remove a branch on a living tree.
Inverter, I have a 40v model that I never used but got it in special and it's for emergency. Don't have an EV with V2L yet and don't want to deal with a generator (overkill). Good to charge a few small things like a cell phone...
Thanks and have a good day.
All great suggestions Guillaumepare, Thanks for sharing and watching! :) Really appreciate it!
After Placing The Sanding Drum
On The Rotary Tool You
Need To Tightin The Screw.
Yep, I agree with you. Even with mine fully tightened it still slips unfortunately. Thanks for watching!
i love you,r videos
Thanks so much Terry! I appreciate that!
Ryobi has a newer HP palm router where they fixed the bit issue
Yes! you are correct, thanks for sharing that. It sounds like they have updated their collet system which is great! Thanks so much for watching itsdarkets!