Sir Anthony, I want to take this time and just say, Thank you. I googled so much on my own with no avail, I was thinking and dreading the 1200+ down the drain. And your experience helped me. I’m sure you have helped a lot of people out with this. God bless brotha.
My neighbor had the same issue after he had a local auto parts store replaced a dead battery but they blew out this fuse. They then replaced the fuse but they neglected to hook up both wires on negative terminal. He was about to have it towed to a dealership. This video helped me resolve the issue. We saved him $$$. You did real good for your first video. Thanks.
The issue with my 2012 F150 was intermittent advancetrac warning and also blinker issues. No blown fuse, all the connections at the hot terminal post had become oxidized. Some sand paper and a small dremel stone cured my issue.
I am from Venezuela and I solved my issue on my Ford Explorer 2013 doing what you did (cleaning positive side of my battery), thank you so much my friend, it was amazing!!!
You saved me on this!!! I went to the dealer and they wanted to install a whole new ABS traction system $1500 BS!!!! this was $40 :) Worked like a charm!!! CRAZY!!
Thanks bro! Your a life saver. Happened to me just today on my 2014 EcoBoost with 6inch lift on 35s. So you can imagine the struggle I had to drive it home without power steering. Exact symptoms you described. But my fuse wasn’t blown. However, was the exact same apparatus. Just needed cleaning and retightened. Without your video, I wouldn’t of known where to start.
Thanks a million man! Solved and fixed my issue. I drove my truck with no power steering for 3 days was hating thinking about taking it in to get fixed... you where the only guy that showed a video of this problem
Thank you! While mine hadn’t actually blown the fuse, I found the nut on the left side was loose. This was what was giving me an intermittent Advancetrack code and scary lack of power steering along with it!
The only thing I would be concerned about is that fuses generally do not just "blow" for no reason. Something in the system is causing resistance, loss of voltage, and/or increase of amperage. You can stick a new fuse in, but the odds of it simply popping again sooner or later are fairly high. Eventually you will just be blowing $40 fuses down the drain. In addition to everything you did here, I would at least climb under the truck and check all plug connections, and add a little dielectric grease to each plug associated with the power steering to ensure low resistance. Also just in case anyone is wondering, there are generally two reasons these electric power steering systems fail. One of them is heat, the other reason is moisture (if you drive in water 10 inches or more). This system is "water resistant" but not waterproof. If I purchased a Ford with one of these systems, the first thing I would do is add dielectric grease to all the plugs associated with the system, and probably run a bead of silicone around any areas where the parts were put together. There are videos on youtube documenting the corrosion inside these units from water. There is also videos on youtube documenting the excessive heat levels on the electronics as they are often near catalytic converters and turbos. I am not sure how to solve the heat issue except maybe to wrap the exhaust with a heat shield wrap near the electric power-steering unit and/or maybe try to fabricate additional heat shielding from aluminum.
Same here..I jumped a friend's car (incorrectly as to Ford's instructions although I've been jumping cars for 30 years with no problems). This fixed the problem. Next time I'll check the handbook before jumping someone.
Congrats on your 1st video. Blown fuse 90% of the times is a safety solution to prevent a bigger damage, it’s not the problem even though replacing it seems to solve the obvious problems. If that problem happened after you went 4 wheeling in the mud possibly the problem could be water getting in and shorting a sensor or something else that caused the blown fuse. That’s what I’m trying to find (location of sensors) of the advance track in an explorer :-) good luck
DUDE!!!!! You are a fucking lifesaver!!!!!! I’ve been scratching my head all day trying to figure this out as FORD is closed right now so I couldn’t take it to Ford and you just save my ass thank you very much I’ve got a 2012 Shelby GT 500 and none of these mustang guys knew what it was of course it had to be a truck guy to figure it out for me
I get the A-T light every once in a while, and it has always 'cleared' itself; doesn't affect power steering, just turn signals; to date, I've been keeping my fingers crossed; so I am very happy to find your video to give me something to check in case the A-T goes out altogether. Thanks!
@@markruehrmund45 I have a 2011 F150 with 5.0, same warning light but no loss of power steering, only turn signal. Fixes it self after few minutes. Any permanent fix for this issue?
2011 F150, 3.5 EcoBoost with same issues after battery change. Thanks a million. Wasn't fuse but bad connection somewhere, I cleaned every terminal and all is good so far, time will tell if it re-occurs.
Great video I never knew there was a battery fuse appreciate the heads up. I'm having the same issue on top of a driver side wheel bearing that I just paid $435 to fix. My speed sensor will arrive today hopefully they'll fix my Advanced warning and tracking light issues if not that battery fuse will be next on top of wiring issues leading to my ABS module thanks again. It never seems to fail issues with my car pops up close to emission and safety test time.
Safe my life brother🙏🏼 had the same issue no power steering same dash lights with the Service Advance Trac and Downhill, no Turn Signal would stay on due to Power Saving sistem , plus Hill Descent Controll… all of that start to happen due to a rough bump! My Battery Fuse was damaged from one on the screws that connects to a terminal and was loose making false contact and not giving enough energy supply and malfunction to my Steering system. Solution: Replacing Battery Fuse 125A 250A part (full terminal part w fuses) after that just turned on my 2013 Ford F150 and boom 💥 everything working like new
I have the same issue also but I also still have power steering. The AdvanceTrac warning comes on and I have the blinker issue. Did replacing the fuse correct your issue Pat Patterson?
My service advance track light is still on also sometimes it looses power and runs rough so I pull over shut the engine off wait a couple minutes stat it back up then goes fine so any idea why this is happening? I have a 2012 Ford f 150 5.0 ty
Solved my issue! I had been scratching my head checking fuses and looking for resolutions for awhile. It happened right after I had the battery disconnected to do spark plugs. Didn't know there was fuses there and on my car they are pointing down not out like yours.
That light came on earlier on my 2011 V8 F150 that says service advance trac. But it drove fine and I couldn’t tell anything was wrong, I shut it off and restarted it and the light went off. But it was my first time seeing that message.
Why were you considering changing the rack and pinion for this advance-trac warning before you found the problem? On my 2013 F150 I just had three Alarms show, advance-trac, hill decent control fault and ABS light but still the truck runs fine. I’m bewildered. Thanks for the video, I did check my fuse and everything is ok.
I had this happen to my 2014 Mustang. I only lost power steering. I replaced that circuit breaker assembly and it now purrs like a kitten. Thanks for your video
@@andrewdenine1685 my 2010 Ford Fusion says the same thing.!!! Lmk if this breaker replacement helped please…I just ordered it but won’t be here until another week
So this isn't the direct problem I'm having but I'm starting to think it may relate and I'm looking for advice. I have a 2012 F150 XLT 3.5 EcoBoost. Currently I'm having trouble with left brake light and blinker not working and I've checked all the bulbs and sockets as well as grounding wires. The reason I ask for advice is periodically I will get the "service Advancetrac" warning and my blinker has the same one blink issue but my power steering does NOT go out. Could these two issues be related or would it simply be a new brake light harness? Added note: running lights work on the brake lights but when I got to drive they no longer work.
thanks that happen to me with my Ford F150 2011 code U0131. That was caused by a short that I did by accident. Tomorrow I will go to buy the part I hope works. Thanks
Need help! I bought a Ford Expedition and the abs and advance trac lights show every time. The thing is that the battery does not have that fuse or breaker, not even the red cap or wires that connect that fuse. I need to know the name of that thing to buy it. What should I order?
Hi, I'm sorry English writing, I had the same problem with my Ford F150 Super Crew 2011 it started when I was driving on mud it showed diferents codes. service advance trac, overtemp water, low oil pressure and check 4x4 solved checking wire harnesses, clean ground connections, remove mud, check fuse box, dry sensors disconnect battery hope can help it!
Just bumped to your video . Question what's the procedure of changing the part just pop it off and replace it? With out taking the negative terminal off?
Service Advancetrac light came on last nite, my f150 stalled on me completely when I pressed the gas pedal to speed up. I studied the videos on here and I checked the fuses, ground wires, circuit breakers, fuel lines, etc., hooked up a hand held diagnostic reader and it didn't give me no codes. I need some answers. What do u think is the problem?
This fixed my loss of power steering and drained dead battery while travelling down the Interstate. Why in the hell does Fix Or Repair Dailey (FORD) let such a flimsy part control such a vital function. And where in the hell do you find this dual fuse masterpiece in the first place. And why in the hell are these flimsy fuses not in the fuse box where they belong??? My last FORD ever!
I was watching this video while driving down the road, when he opened his door and the chime was going off I was looking around thinking it was mine, I know, i'm an idiot!
I have the same problem, no power steering, no traction control and no blinker. but I checked the fuse with voltmeter and it seems to be good and doesnt look like its blown, wonder if it would be grounding issue and where its located. on a 2013 f150 ecoboost
Mine says *low tire pressure and *check brake system along with *service advancetrac and I have all of those lights on including ABS and TCS which I fixed but the light is still on
My 2013 I had in shop for miner problems put new brakes all around new hub on front now it say that the down hill desent is at fault help please and thanks
My 2012 Mustang have the same symptoms... I am really hoping this fuse is the problem, because I am really sweating and craping diamonds... holy s$&$, I don't live in the US, so the steering rack would cost me my right eye and my left nut.
@@anthonyseymour2217 Finally I can breath in peace, my colon was not going to resist much longer... and the mechanic was not very good with Mustangs. Which is understandable, because there are not many mustangs around in my country. Thank you man, your video saved my colon... and my liver, have you heard about social drinkers? Well, I am not one of those, I am an stress alcoholic. At least I am a lucky SOB.
@@santiagocardenas5008 Check the fuse with a multitester (instrument to measure Ohm-V-A) or whatever you call it in your country. If it is burned, Go and solder the fuse, chose a place in which they fix car batteries, when you conect it again it should work. It will last a couple of months, you can also put a piece of cooper, in beetwen but that will last considerably less. While you buy the new piece. Another thing, if you have a gps or a device that turns your car off at a distance or via cellphone check the conections.
I changed the same fuse on my 13, 5.0 4x4 f150 and the service advance trac went off. Truck ran great until i shut it off,started it back up same problem with serv adv trac. Neither fuse was blown can anyone help
Can someone help, I’ve have this issue for years and light goes on and off by itself only thing is turn signals won’t stay on. I’ve tried almost everything
Ford told me 2000.00 for new everything , repair shop charged me 430.. for new fuse and power steering sensor and still nothing , I bought the thingy you changed will find out later if it works
New electric steering is stupid engineering. He old power steering pump design was so much more dependable. Don’t buy a truck with the electric junk ford or Chevy $40.00 for a $5.00 fuse is ridiculous. Wait till something major like the rack 1200 versus 300 for a pump . I have a 2012 just like yours XLT 4x4. I was not aware they had mad such a engineering blunder or I would have not bought it .
I have a 2010 Ford fusion saying same exact thing. Advance Trac and power steering. I did replace power steering and it didn't fix the problem. Is there the same fuse near my battery?
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
Sir Anthony, I want to take this time and just say, Thank you. I googled so much on my own with no avail, I was thinking and dreading the 1200+ down the drain. And your experience helped me. I’m sure you have helped a lot of people out with this. God bless brotha.
My neighbor had the same issue after he had a local auto parts store replaced a dead battery but they blew out this fuse. They then replaced the fuse but they neglected to hook up both wires on negative terminal. He was about to have it towed to a dealership. This video helped me resolve the issue. We saved him $$$. You did real good for your first video. Thanks.
You've made a lot of Ford truck owners happy, including me.
The issue with my 2012 F150 was intermittent advancetrac warning and also blinker issues. No blown fuse, all the connections at the hot terminal post had become oxidized. Some sand paper and a small dremel stone cured my issue.
I’m gonna try this. I’m having same problem on 2012 . I also noticed the steering angle degrees in the off road screen doesn’t work too.
❤
I am from Venezuela and I solved my issue on my Ford Explorer 2013 doing what you did (cleaning positive side of my battery), thank you so much my friend, it was amazing!!!
You saved me on this!!! I went to the dealer and they wanted to install a whole new ABS traction system $1500 BS!!!! this was $40 :) Worked like a charm!!! CRAZY!!
You could save yourself an extra 35 bucks if you just got an in lin fuse frome the local auto parts store
Thanks bro! Your a life saver. Happened to me just today on my 2014 EcoBoost with 6inch lift on 35s. So you can imagine the struggle I had to drive it home without power steering. Exact symptoms you described. But my fuse wasn’t blown. However, was the exact same apparatus. Just needed cleaning and retightened. Without your video, I wouldn’t of known where to start.
Your truck didn't shut off completely?
Michael Pinto Nope. Just affected power steering.
Interesting 🧐
Thanks a million man! Solved and fixed my issue. I drove my truck with no power steering for 3 days was hating thinking about taking it in to get fixed... you where the only guy that showed a video of this problem
Thank you! While mine hadn’t actually blown the fuse, I found the nut on the left side was loose. This was what was giving me an intermittent Advancetrack code and scary lack of power steering along with it!
what nut? i have similar problem
Nut behind the wheel
@@n5xla lol
The only thing I would be concerned about is that fuses generally do not just "blow" for no reason. Something in the system is causing resistance, loss of voltage, and/or increase of amperage. You can stick a new fuse in, but the odds of it simply popping again sooner or later are fairly high. Eventually you will just be blowing $40 fuses down the drain. In addition to everything you did here, I would at least climb under the truck and check all plug connections, and add a little dielectric grease to each plug associated with the power steering to ensure low resistance. Also just in case anyone is wondering, there are generally two reasons these electric power steering systems fail. One of them is heat, the other reason is moisture (if you drive in water 10 inches or more). This system is "water resistant" but not waterproof. If I purchased a Ford with one of these systems, the first thing I would do is add dielectric grease to all the plugs associated with the system, and probably run a bead of silicone around any areas where the parts were put together. There are videos on youtube documenting the corrosion inside these units from water. There is also videos on youtube documenting the excessive heat levels on the electronics as they are often near catalytic converters and turbos. I am not sure how to solve the heat issue except maybe to wrap the exhaust with a heat shield wrap near the electric power-steering unit and/or maybe try to fabricate additional heat shielding from aluminum.
Same here..I jumped a friend's car (incorrectly as to Ford's instructions although I've been jumping cars for 30 years with no problems). This fixed the problem. Next time I'll check the handbook before jumping someone.
yes that is right
WTF do you mean by "plugs"?
Congrats on your 1st video. Blown fuse 90% of the times is a safety solution to prevent a bigger damage, it’s not the problem even though replacing it seems to solve the obvious problems. If that problem happened after you went 4 wheeling in the mud possibly the problem could be water getting in and shorting a sensor or something else that caused the blown fuse. That’s what I’m trying to find (location of sensors) of the advance track in an explorer :-) good luck
DUDE!!!!! You are a fucking lifesaver!!!!!!
I’ve been scratching my head all day trying to figure this out as FORD is closed right now so I couldn’t take it to Ford and you just save my ass thank you very much I’ve got a 2012 Shelby GT 500 and none of these mustang guys knew what it was of course it had to be a truck guy to figure it out for me
I get the A-T light every once in a while, and it has always 'cleared' itself; doesn't affect power steering, just turn signals; to date, I've been keeping my fingers crossed; so I am very happy to find your video to give me something to check in case the A-T goes out altogether. Thanks!
I'm having the same problem as you. I changed mine out but the problem still persists, gonna change the fuse next
@@markruehrmund45 I’m having the same problem with my 2010 Ford Fusion, did the fuse change works for you ?
@@markruehrmund45 I have a 2011 F150 with 5.0, same warning light but no loss of power steering, only turn signal. Fixes it self after few minutes. Any permanent fix for this issue?
@@markruehrmund45 I have same exact issue have you found a fix?
@@aminurchowdhury46 did you ever figure out a fix for yours.
Thank you for this video!! You saved me a big headache!! I never knew that part was even there.
2011 F150, 3.5 EcoBoost with same issues after battery change. Thanks a million. Wasn't fuse but bad connection somewhere, I cleaned every terminal and all is good so far, time will tell if it re-occurs.
Problem came back after a few unsuccessful battery disconnect resets. Had to replace the EPAS. All good now.
Ultrafrozen how much did it end up costing you?
Never heard of that solution, but thanks for telling us how to find and fix it.
Great video I never knew there was a battery fuse appreciate the heads up. I'm having the same issue on top of a driver side wheel bearing that I just paid $435 to fix. My speed sensor will arrive today hopefully they'll fix my Advanced warning and tracking light issues if not that battery fuse will be next on top of wiring issues leading to my ABS module thanks again. It never seems to fail issues with my car pops up close to emission and safety test time.
Safe my life brother🙏🏼 had the same issue no power steering same dash lights with the Service Advance Trac and Downhill, no Turn Signal would stay on due to Power Saving sistem , plus Hill Descent Controll… all of that start to happen due to a rough bump!
My Battery Fuse was damaged from one on the screws that connects to a terminal and was loose making false contact and not giving enough energy supply and malfunction to my Steering system.
Solution: Replacing Battery Fuse 125A 250A part (full terminal part w fuses) after that just turned on my 2013 Ford F150 and boom 💥 everything working like new
Thank You so much for this video. Helped tremendously in diagnosing.
Very helpful.had the same thing happened to my 2012 with the 5.0. But i still had power steering.
I have the same issue also but I also still have power steering. The AdvanceTrac warning comes on and I have the blinker issue. Did replacing the fuse correct your issue Pat Patterson?
SilverSurfer OZ Yes it did help after replacing the fuse no more problems has of now.
Would my 2012 mustang gt fail emissions test is all I'm wondering
It fixed my power steering but not the light for my advance track it's still on
My service advance track light is still on also sometimes it looses power and runs rough so I pull over shut the engine off wait a couple minutes stat it back up then goes fine so any idea why this is happening? I have a 2012 Ford f 150 5.0 ty
Keep these videos coming. I drive 3 different models of Fords.
I have a 2013 ecoboost and this solved the problem. Thanks a lot man.
Did yours kill power like limp mode while moving?
I know you made this a while but had to like and comment. Great Job with your first upload. Well informed and explained. Thanks again
Boston Billy
Thank you so much. This video just saved me $2600
When you take it to ford.everyone gets payed
Same exact thing is going on with my F-150 when I changed out the battery early this year.
I live in Long Beach and you just saved my skin. Thank you so much!!
Dude I looked everywhere until I found your video! Thanks man!
Thank you so much for saving me a trip to the stealership
Solved my issue! I had been scratching my head checking fuses and looking for resolutions for awhile. It happened right after I had the battery disconnected to do spark plugs. Didn't know there was fuses there and on my car they are pointing down not out like yours.
That light came on earlier on my 2011 V8 F150 that says service advance trac. But it drove fine and I couldn’t tell anything was wrong, I shut it off and restarted it and the light went off. But it was my first time seeing that message.
Thank you thank you thank you !!!! I have a 2014 f150 and the exact same problem ... you are awesome!!!!!
Thank you for this... it saved me a trip to the shop... Thank you Thank you Thank you.....
Why were you considering changing the rack and pinion for this advance-trac warning before you found the problem? On my 2013 F150 I just had three Alarms show, advance-trac, hill decent control fault and ABS light but still the truck runs fine. I’m bewildered. Thanks for the video, I did check my fuse and everything is ok.
Did you figure out the problem?
I had this happen to my 2014 Mustang. I only lost power steering. I replaced that circuit breaker assembly and it now purrs like a kitten. Thanks for your video
Really cause I bought the circuit breaker for my 2012 gt & it still has advance Trac on & my steering or lights weren't affected to begin with
Dude can you give me part number
@@erickp2027
Did you fix your Mustang???????
I have the same symptoms and I am hoping this is the problem.
@@bryanquijanesortega3221 yes unfortunately I had to buy a brand new clutch
@@erickp2027 what did the clutch have to do with it?
You sir just saved me money! Thank you!
Thanks alot man. You saved me hours of diag.
THANK YOU for your video this gives me a place to start have same problem
Good job Man! I think you just solved my problem.
2010 fusion still got power steering but brakes will feel like they are breaking before light comes on for advtrac. Once lights on no problem
my 2011 don't have power steering says power steering assist fault and service advance track . along with engine light on the cars a mess
@@andrewdenine1685 my 2010 Ford Fusion says the same thing.!!! Lmk if this breaker replacement helped please…I just ordered it but won’t be here until another week
So this isn't the direct problem I'm having but I'm starting to think it may relate and I'm looking for advice. I have a 2012 F150 XLT 3.5 EcoBoost. Currently I'm having trouble with left brake light and blinker not working and I've checked all the bulbs and sockets as well as grounding wires. The reason I ask for advice is periodically I will get the "service Advancetrac" warning and my blinker has the same one blink issue but my power steering does NOT go out. Could these two issues be related or would it simply be a new brake light harness? Added note: running lights work on the brake lights but when I got to drive they no longer work.
Thanks for the info!!! Now keep that truck motor clean
Nice video, anything that I can do that’s keeps me away from paying a mechanic $150.00/hr I love. Thanks!
thanks that happen to me with my Ford F150 2011 code U0131. That was caused by a short that I did by accident. Tomorrow I will go to buy the part I hope works. Thanks
That truck 2013 ??? Look like 1993
I can confirm that's a 2013. Looks EXACTLY like my truck. Single Cab and white.
He means it’s so rough and dirty looking!
And that vid vast 4 urs ago so it was like new lol
Dam thats a dirty ass engine lol
How can you tell the fuse is blown
Need help! I bought a Ford Expedition and the abs and advance trac lights show every time. The thing is that the battery does not have that fuse or breaker, not even the red cap or wires that connect that fuse. I need to know the name of that thing to buy it. What should I order?
Hi, I'm sorry English writing, I had the same problem with my Ford F150 Super Crew 2011 it started when I was driving on mud
it showed diferents codes. service advance trac, overtemp water, low oil pressure and check 4x4
solved checking wire harnesses, clean ground connections, remove mud, check fuse box, dry sensors disconnect battery
hope can help it!
So what’s the name of the part
To install a new one do you need to disconnect the whole battery or just the bolts that hold the fuse?
Dude, you are the man. Owe you some 🍺 for that save on my truck.
Anybody know where to get that fuse separate fron buying the whole harness
Thanks, i called ford and they only will sell the whole harness, not just the fusebox smh. I appreciate it, great tip u shared. Take care
I'm having the same kind of loss of power result within message and the wrench 🔧 light.
Just bumped to your video . Question what's the procedure of changing the part just pop it off and replace it? With out taking the negative terminal off?
Service Advancetrac light came on last nite, my f150 stalled on me completely when I pressed the gas pedal to speed up. I studied the videos on here and I checked the fuses, ground wires, circuit breakers, fuel lines, etc., hooked up a hand held diagnostic reader and it didn't give me no codes. I need some answers. What do u think is the problem?
Man i hope thats my problem although my syptoms arent the same
This fixed my loss of power steering and drained dead battery while travelling down the Interstate. Why in the hell does Fix Or Repair Dailey (FORD) let such a flimsy part control such a vital function. And where in the hell do you find this dual fuse masterpiece in the first place. And why in the hell are these flimsy fuses not in the fuse box where they belong??? My last FORD ever!
Doesn't fix & repair mean the same thing 😕
homie u save me a couple hundreds thanks
Where did you get the part separately
Thanks!! Saved me a lot of worry! Subscribing!
You're welcome! And thank you sir!
I was watching this video while driving down the road, when he opened his door and the chime was going off I was looking around thinking it was mine, I know, i'm an idiot!
What is that fuse part called
Thank you for this video.
I have the same problem, no power steering, no traction control and no blinker. but I checked the fuse with voltmeter and it seems to be good and doesnt look like its blown, wonder if it would be grounding issue and where its located. on a 2013 f150 ecoboost
What is this part called or # (battery fuse) that you replaced. Thank you in advance!
My 2012 will f150 3.5 will turn on power, but won't crank. Screen says service advance trac and trailer module fault. All fuses are good. I stuck.
Great video
Where did you buy the fuses for the tracking system I only have issues with tracking. My tires just keep spinning no traction
What caused the fuse to blow, any idea? Nice work.
Thanks for this video
Mine says *low tire pressure and *check brake system along with *service advancetrac and I have all of those lights on including ABS and TCS which I fixed but the light is still on
Even after filling up all my tires with the correct PSI so I wonder if it’s the sensor / wires and affecting the computer system
how did you checked the fuse? by looking?
My 2013 I had in shop for miner problems put new brakes all around new hub on front now it say that the down hill desent is at fault help please and thanks
What is a part number
I would like to know as well
very effective video for being the first thanks
Did the fuse or the number 76 fuse blow after putting it into 4H?
My 2012 Mustang have the same symptoms... I am really hoping this fuse is the problem, because I am really sweating and craping diamonds... holy s$&$, I don't live in the US, so the steering rack would cost me my right eye and my left nut.
Dude I laughed wayyyy to hard at this🤣🤣 hopefully you can get it figured out buddy!
@@anthonyseymour2217
Finally I can breath in peace, my colon was not going to resist much longer... and the mechanic was not very good with Mustangs. Which is understandable, because there are not many mustangs around in my country.
Thank you man, your video saved my colon... and my liver, have you heard about social drinkers? Well, I am not one of those, I am an stress alcoholic. At least I am a lucky SOB.
I have this issue on my 2014 Ford Taurus....I can’t wait to try this
@@santiagocardenas5008
Check the fuse with a multitester (instrument to measure Ohm-V-A) or whatever you call it in your country.
If it is burned, Go and solder the fuse, chose a place in which they fix car batteries, when you conect it again it should work. It will last a couple of months, you can also put a piece of cooper, in beetwen but that will last considerably less. While you buy the new piece.
Another thing, if you have a gps or a device that turns your car off at a distance or via cellphone check the conections.
Mine comes on randomly. I don’t lose power steering when it comes on, only the blinkers. Any ideas?
Same... this and intermittent low oil pressure when car is not actually on.
I changed the same fuse on my 13, 5.0 4x4 f150 and the service advance trac went off. Truck ran great until i shut it off,started it back up same problem with serv adv trac. Neither fuse was blown can anyone help
Did you figure it out? Mine was the Hydraulic control unit. Expensive fix...
Same truck same issue thanks
I have this exact problem except my power steering still works and my fuse is fine so weird
But why did the fuse blow?
Good job
Can someone help, I’ve have this issue for years and light goes on and off by itself only thing is turn signals won’t stay on. I’ve tried almost everything
Whats the name of the part/ fuse replaced?
So whats that fuse actually called.
Hey my truck is doing that exact thing but it doesn't look like the fuse is blown
What would I call this when I go looking for it?
Ford told me 2000.00 for new everything , repair shop charged me 430.. for new fuse and power steering sensor and still nothing , I bought the thingy you changed will find out later if it works
Did it work I just paid 1115 to a shop and they changed the rack and all the other parts but 2 days later same thing happened smh
Thank you
What's the part number??? Thanks! 👍👍👍💰
Mines the eco boost, but bet it's same set up
Hell the blinkers don’t work great anyway
New electric steering is stupid engineering. He old power steering pump design was so much more dependable. Don’t buy a truck with the electric junk ford or Chevy
$40.00 for a $5.00 fuse is ridiculous. Wait till something major like the rack 1200 versus 300 for a pump . I have a 2012 just like yours XLT 4x4. I was not aware they had mad such a engineering blunder or I would have not bought it .
Where did you you buy the part for your truck
I'll try it , I tried the disconnected neg terminal , Didn't work
Wow, thanks
Hey i was wondering where did you get the part, ford said they only sell the whole harness and autozone doesnt carry it...
Geek Auto parts has everything
Good Man!
What is that part called?
Anyone know the part numbernto the fuse he replaced?
I have a 2010 Ford fusion saying same exact thing. Advance Trac and power steering. I did replace power steering and it didn't fix the problem. Is there the same fuse near my battery?
Original yes mine 2010 Ford Fusion is doing it as well, just watched the video and mine is the same problem, same 2 fuses on the battery terminal
Did that fix your problem