1984 Porsche 911 3.2 Carrera Safari Build Project

1984 Porsche 911 3.2 Carrera Safari Build Project
‘Willy’ started life as a 1984 Porsche 911 3.2 Carrera purchased by Kelly-Moss Director of Operations, Andy Kilcoyne in March of 2018. The story truly begins a few months prior when Hoonigans Larry Chen and Will Roegge were in Wisconsin shooting the VICCI Safari car blasting across a frozen lake not far from Kelly-Moss HQ. While connecting over burnouts, drifting and general shenanigans during the shoot, Larry, Will and Andy kept in touch and when Will listed his ‘84 911 Carrera at a great price, Andy jumped on it. A few group texts and one friendly dare later, Will’s old Carrera was the new candidate for the next Safari build. As Andy says, “It didn’t take much convincing for me give this Carrera the Safari treatment. If you’ve ever driven one, you’d understand why.”
1984 Porsche 911 3.2 Carrera, Willy Safari Build Highlights
★ Kelly-Moss (KMR) modified stock aluminum front bumper and custom aluminum lower valance
★ 30” Black Oak LED curved light bar in the front bumper, 30” curved rear light bar tied into reverse lamp circuit, and 40” combo spot / flood curved light bar roof mounted
★ 9eleven LED headlamps with DRL’s and integrated turn signals
★ Hella Rallye horns
★ 17”x7” Braid Fuch’s replica wheels
★ LT245/65/R17 BFGoodrich All-Terrain KO2 tires
★ 6 piston front and 4 piston rear Brembo brakes
★ Dual Tilton brake master cylinder with adjustable brake bias
★ Exe-Tc adjustable, inverted twin tube gravel dampers
★ Eibach springs (paired with dampers, 11” travel up front with 10” in the rear)
★ KMR reinforced front lower control arms featuring 18mm ball joints
★ Elephant Racing suspension bushings
★ Fuel Safe 17 gallon fuel cell
★ Odyssey battery relocated into the smugglers box
★ RS style door panels and carpet
★ Recaro Leather seats
★ KMR seat mounts and anchors to lower the driver and passenger 3”
★ MoTeC C127 digital dash display with back up camera illumination on dash
★ MoTeC PDM (Power Distribution Module) to eliminate all fuses and relays
★ MoTeC keypad for operation of all electronics
★ KSV Loom custom chassis and engine wiring harnesses
★ Porsche Classic GPS radio
★ JL Audio amplifier
★ Focal speakers
★ KMR Custom Carbon/Kevlar roof
★ Momo Prototipo steering wheel
★ KMR custom full roll cage extending into front chassis for structural reinforcement
★ Roof rack mounted to halo in roll cage to handle heavy loads
★ Seam welding and chassis reinforcement
★ KMR built 3.4L engine: 340hp
★ Jenvey electronic fuel injection
★ Porsche smart coils
★ Mahle high compression Pistons and cylinders
★ Custom ground camshafts for low end torque
★ MoTeC engine management - tuned by KMR
★ BBE headers with a 991 Cup high flow muffler
★ Twin Setrab oil coolers
★ 185a custom built Alternator (stock is 90a)
★ BRM built 915 Gearbox
★ 7/31 ring and pinion
★ Short gear ratios (1-5)
★ Guard billet LSD differential
★ Wevo shift gate conversion
★ G50 axle conversion
★ MoTeC backup / rear view camera integrated next to rear lightbar
★ KMR fender liners and mud flaps
★ Complete rotisserie body/chassis restoration, including many custom project specific touches along the way.
★ Removal of all unnecessary mounting tabs, brackets, mounting holes, etc.
★ Complete smoothing of dashboard, removing all knobs, switches, and levers that are now integrated into the PDM & Keypad, including eliminating the glove box door.
★ KMR custom hand formed front and rear flares for larger circumference wheel/tire package.
★ All steel construction body panels with exception of KMR carbon/kevlar roof panel
★ 2 ¾” larger wheel well opening - maintaining radius to look unmodified
★ 5” removed from front inner wheel well opening on the chassis side to aid in steering lock (side to side) clearance
Built By:
KELLY-MOSS ROAD AND RACE
5105 W CLAYTON RD., MADISON, WI 53711
Phone: [phone]
[e-mail]
www.kellymoss.com
/ kellymossroadandrace
/ kellymossroadandrace
Please Check out and Subscribe to Builder's TH-cam Channel: / kellymossroadrace
-----------------------------------------------------
This video purpose is to tell world about amazing car build project and to inspire ever growing car builder community around the world. So if you're inspired in building your own car and want to learn more about how to do it in best way, don't hesitate and read build source page so you can learn something new and if something is not clear you can always ask builder some questions about the build.

[@CorradoRacer]

I wanna a video of this lil thing! awesome and stunning build

[@МаркРоманов-ш9ы]

Perfect!!!

[@anatoliy_nazhalsky]

Порше - моя улюблена автівка!

[@baltazarcruz8312]

Ooooouuu!!!! Muy buen trabajo ,quedó chingón

[@mittulgajjar1905]

Insanely awsome 🙌

[@claudiofiacco8283]

Meraviglia

[@KD-ko7tr]

Awesome

[@elgatonativodigital3954]

And now, to run the Dakar classic 2021