28kg Triple Motor Melt - Copper & Aluminium Ingots - ASMR Melting Bigstack Bullion
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- So i checked the scrap bin and found 3 mini motors so todays video shows me stripping & cutting them down to melt all the Aluminium & Copper in them.
I Have well over 200 Vids so be sure to check 1 or 2 out if you have time on the link below.
/ bigstackd
I have a PO box address below in case anyone wants to send a letter or anything 😬👍🏻.
D Heighway
P O Box 490
Bunbury 6231
WA , Australia
Follow me on facebook
/ bigstackd-casting-2935...
Follow me on Instagram
www.instagram....
If you want 5% off you Devil-Forge furnace contact me on bigstackddddd@mail.com for a personal unique code .
Forge supplied by my friends over at Devil-Forge .
www.ebay.com.a...
28kg Triple Motor Melting - Copper & Aluminium Ingots - Bigstack Bullion
![PURPEECH - นี่ฉันเองคนที่... (It's me) [Official MV]](http://i.ytimg.com/vi/NuhHd0hOOg8/mqdefault.jpg)
![[FULL EP.16] เซียนพาลุย "เผือก-ฟรอยด์" กรี๊ดลั่น จนปูหนี | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/FsqUvwS3b-Y/mqdefault.jpg)
![[TH] JFT vs RLF - VCT Ascension Pacific - Day 2](http://i.ytimg.com/vi/PuIH7w_jO6c/mqdefault.jpg)
Hey guys if you wana try this at home just remember safety 1st and be sure to contact me for a personalised 5% discount code on bigstackddddd@mail.com . Links in description for the furnace 👍🏻👌🏻
Thank you so much for introducing me to devil forge I’ve been watching you since early 2018 any tips on getting subs
Hey matey I did this for well over a year before I got my first hundred subs which was very very slow all I could suggest is keep pushing videos out For more people to watch, unfortunately because of me I have noticed a massive amount of casting channels pop-up so that’s gonna make it rather difficult for them all to grow . Sorry bout that 🤦🏻♂️
bigstackD Casting Thanks for the tip, I really didn’t write that question well. I don’t mean it as competition this was supposed to be friendly and I can’t see me getting as big as you. At least we don’t game for TH-cam that crowd has too many channels. Good luck, I will continue to watch and enjoy your videos every Friday.
It isn’t that important but I didn’t read your reply all the way through I took that comment the wrong way. Sorry about that. One more question, it rained in Kansas last night after filming and I don’t know if that’s bad for a already cooled down furnace.
R.i.p. Grant Thompson. 1980-2019. Legend
By the way, shout out to you BigstackD for all the hard work. I have taken aluminum boats and motors apart before for scrap and the shit is hard work. I hope we keep on finding more and more users. These videos are great editing and all.
Slag jars are starting to fill up!! Can’t wait for the video on that melt.
I'd love a slag melt video. Either one jar, or all of them in a giant segmented/layered ingot.
Jseldon law I think he has a video where he does a layered ingot, not sure if it was slag or fresh melt
Love your videos. No useless banter. Straight here, this is the sound of happiness!
come for the melting stay for ingot, who was clearly drunk at the end
I like this channel no long winded intros or shit like that. Just a man his forges and his dog doing what they do best keep up the good work brother
dont forget fucked up music
I want to see a deck of cards and poker chips. Cards in aluminum and chips in different metals? Do it up!
I don't wanna be the dealer shuffling a deck of aluminium.
@@Asdayasman I just wanna D to stack the deck in a big way.
Nothing niceier than taking scrap and turning it into something that appeals to the eye and keeps the mind busy !
Love your videos just fount them a few weeks ago . they are very relaxing to watch. Love this kind of stuff plan on starting to do it my self. The wife likes them as well and pet the pup for us . thanks
Cheers James👊🏻😁
Why are these videos so addictive. I have no intention of ever melting metals, nor the knowledge to even get started, yet I'm completely enthralled by these videos.... Cheers
bigstackD Casting Is that cool neighbor who is always drinking beer and melting shit down in his driveway
@bigstackD Casting THX
I really enjoy watching you melt aluminum. Probably because you can actually watch aluminum melt.
Great video! I like it when you polish the bars to mirror finish and stamp letters and numbers on them.
That copper bar is pure art!
Когда всё есть и делать совсем нечего =)
если газ на-шару то вполне себе доход..... а так ну его на йух жечь покупные баллоны.
В точку.
Одним словом - антипод. Всю жизнь вниз головой ходит...
@@СергейАлексеенко-о4йОткуда в Австралии газ на шару? Там ничего на шару нет.
@@СергейАлексеенко-о4й Выгодней обмотку перемотать и двигатель восстановить .
You have a valuable talent. Ingot is the cutest furry bundle of sweetness and always makes me smile. Yowsa,the copper bar is amazing, and look how it reflects the light😍
Awesome brotha! I can tell those smaller ingot molds got hot as S*#% for you too even with the gloves!. Great job on those 👍🏻👍🏻👍🏻🍺🍺
Megan F are you talking to me or BigD haha? I’ve burnt myself so many times it’s not even funny anymore 😂😂
Megan F haha oh they did 🤣 those gloves are supposed to be better but when they heat up they are impossible to get off without getting burned. I have permanent blisters from these things..oh well 🤷🏻♂️ the joy of melting and showing others makes me happy so it’s all good 👍🏻 pain is temporary and pride is forever 😉
Megan F anytime I can help 👍🏻😊
I've watched several motor teardown videos, and the cutting of the ends and tapping out of the runs is always satisfying.
When the dog ran into the shelf I thought the entire thing was gonna come crashing down
You got me thinking. Imagine how strong that shelf must be o.O 😲
Fairly new to the channel but man I can't get enough of these videos!!!
Thank you for showing me how to break the motors down. I’ve collected a but load of ceiling fans out of trash piles but could never figure out how to get the copper out. The Dragon lives.
👌🏻😁
Она нмпрррппппаапп
Little ingot seems to love the new additions to the hoard
Yeah that little fella gets pretty excited when he hears something new go on the shelf👌🏻😁
Well keep up the fantastic work i love them 🍻
Love it
Try and make a 10 kg copper bar if possible
The copper bar is no .999 fine is aprox. 90-98% copper 99.999 fine coper is super expensive
1kg can cost up to 50$ (USD)
Hey CHINEZU best do some more research matey or find another dealer as clean copper bar and clean copper cable is minimum 99% . The only possibility of impurity’s in clean Copper cable is maybe iron and oxygen and even with this your clean copper is still over 99%.
I know it is a large project but i did it my self and i actually learned alot from it, plus its bloody awsome having a 10 kg bar/ingot
Love to watch that molten copper pour, it's a Beautiful thing!!!
Cheers, My Friend!!!!
You should start casting yourself round wheel waits and build yourself a unique metal gym. *Love the videos* 🖤
It was cool watching you put the aluminum pieces in one by one.
full size replica of the dog in copper. GO
First we cover the dog in dirt to get the mold...
An ingot of Ingot. Delicious...
that will be a large lump of copper
you're the best at waste not want not! definitely going to be checking the scrap metal bins out more for good melt material from now on
Bigstackd shelve: **Mysteriously gets buried**
Future archeologists: this man had a lot of time in his hands
Nugget Hey I saw you comment on another random video! What are the odds
Nugget I loved you in kindergarten and kindergarten 2
hello nugget i think jacksepticeye was looking for you
Waluigi I loved you in smash
Little Ingot looks happy with the results. Nice melt, D!
Outstanding video!! Those bars turned out beautiful. 👍🍺🍻
This is the zen I didn't know I needed in my life.
Nice work. That copper bar was beautiful. Hard to believe how much aluminum you got out of the slag.
Yeah this melting metal stuff surprises me all the time with its possibilities 😁👍🏻
Its always satisfying to watch things melt
Look at that nice gangsta ride in the garage there. ;-)
Hey Poppa P how you been 🤔? I was just talking to my mate as you commented and I was saying I’m very soon gonna show the world how bloody easy it is to do a Lava Melt 🤦🏻♂️!!
But only to prove how quick and easy it is and trust me I won’t take any pleasure in it I will be doing my normal video , full melt and casting and cleaning and other stuff on top👌🏻. I just wanted people to realise what a cheap cop out it is to melt some lava rocks for 5 minutes then pour it onto something for 1 minute and call that a video! it’s bloody disgraceful and it’s an absolute joke and from my point of view as a fellow Caster that’s just not right . Ok they might get the views but that’s all some channels want 😑.
I concur nice bike shot.
@@bigstackD lol i fukn hate Lava melts ..... wouldnt be talking about presstube would you ! loll
WTF is it with this channel?
Breaking shit apart melting and melting and melting ?? Nothing new ever ??
And I just can't stop watching! It is insanly relaxing to watch you break and melt stuff down, make cute small and big bars and other shapes all shiny and then place it in the treasure room.
Don't ever change, atleast not to much this is awesome !! wish you lived next door, I would be over with beer everytime you did a new melt :-)
Cheers matey I appreciate your comment . Was a bit worried when I started reading but it turned out great 👌🏻😁
@@bigstackD That was my sneaky plan m8, have a good one!
wow you are getting more and more better at this
try casting a lego shape with the copper
y just one? do 6 and stack them!
Very cool idea!!!
So relaxing! Like Bob Ross painting a masterpiece....but at 1200 degrees. Super speed tear down of that motor was satisfying!!
Looks like your guard dog is working overtime in this one
You posted this at 4:50 am where I love
Live*
*WHEN IS IRON JACK GONNA SPONSOR THIS MAN*
I hope one day you can make your extension-house out of aluminium, copper and bronze bricks. Just don't forget to coat them so they don't get rust.
Actually matey aluminium copper and bronze will not rust , they will tarnish some but rust is something that won’t happen with those particular metals 😁👍🏻
The dust shall live another day so it seems
I agree about the playing cards. That would be an awesome addition to the stack.
Here we go again: Monday...Tuesday...Wednesday...Thursday...*Melt Day*
You show how much work that is put in for your fans
Cheers from Spain!
👌🏻😁🍻🍻🍻🍻
Another great video! Great to see Ingot as well!
THROW that fire ingot into bucket with water its more efficiency :) ingot gets harder and heavier and every surface adjustment will look better ❤️❤️
Stupid... It can't get heavier... That goes against the laws of physics
@@Lunch_box okay man let me educate you :) I been doing this over 5 years and I have done High School with this domaine so I know something about it... Every material has inside structure of milion parts and when you warm up material that little parts will put back from each other, when you melt it that little parts will disappear and when that melt material pour into that casting jar it will very slowly cool down and that little parts will create again but they are far away from each other and that slowly cooling make that every part connect with other part and create very hard structure :) this take many hours to cool down on air so thats why its quicker put it into bucket with water because in that moment that little parts get cool down shock and their natural reaction is find some "partner" to connect with, otherwise when one little part cant find "partner" its very high chance that material just broke cause in some place isnt connect so he just cant stand that high pressure so he just explode and broke material :) and finally material gets heavier because that little parts will quickly connect in that cool down shock and create bigger squad than it was before melting... Of course its not like some +1 kg or something like that... Often its harder only like 0.1 kg or less but still it gets little bit weight up... So I hope you understand me ❤️ and you probably ask why would he put it in bucket and not on Ice... Well the reason is because in that cool down shock that little parts need to connect to each other and it can happen only in bucket with water, when he put that in Ice in many parts in that material that parts just cant connect so they just explode and create crack inside that material...So when it cool down he can make some surface adjustment and it will looks like good but actually inside of that material is somewhere crack and every part of material has different hardness so it can be problem when you go machining or cutting that material cause somewhere its hard somewhere its softer because that little parts couldnt connect to somebody in that cool down moment :) You can actually see that when he pick up that hot metal and put it on that Ice so mainly middle gets quick cool down but corners almost nothing... You can ask me anything about this I know what I'm talking about 😋😇
@@kerhy7666 to long didn't read, you lost me when you mentioned your high school education as a proof of purchase to buy your bullshit...
I said nothing about hardness... STUPID... I mentioned heavier... YOU CANT ADD MASS TO AN ALREADY POURED BAR BY COOLING IT QUICKLY... YOUR A FUCKING IDIOT
@@Lunch_box Hard to believe but its truth 😋 go learn on Melting High School and you will learn something about it ❤️
Wow... I didnt think you could get THAT much out of the old motors. Good to know and fun to watch. Also, that was a TON of soot-type material after the copper pour. For stuff like that, that is when I say it is crucial to make sure to flux, stir, and slag (or skim). One thing you could try next time, when working with super dirty materials like this, is to put a good bit of flux (borax) in the crucible with materials upon initial firing of the furnace. I think there can be such a thing as too much flux, but a bit sprinkled in with everything so that while it melts down, the impurities will grab on and float to the top. Don't forget to give a good stir, as molten metal is still heavy enough to keep everything trapped in the bottom. If ever you have a soot-pile like that again, might I recommend that you stop the pour, and re-skim, re-heat... It will keep your ingots more pure, and therefore worth a bit more. Also, do you base your prices on scrap values or cleaned values?
I used to rate them on scrap value but in the last year I now go off of current commodities value👍🏻
Looks like you're running out of room, mate! You're gonna need a new shelf soon! Well done!
I keep saying he needs to do a "consolidation" melt. All his like metals into single huge sand-cast ingots.
or a metal man cave just for him his friends his fans and ingot
I can't get enough of the vids.
Да уж, каждый гонит по своему!
Had no idea about metal melting until bigstackd and now I'm hooked
For those motor housings I've found just to use a large hammer to break them up. Basically throw them on the floor and smash them flat.
Cool matey will try that next time 👌🏻😁
Nothing like good scrap motors to melt down. Thank you for another great video to watch 👍
I see you've switched to freedom units for the bar markings. Great video
It's another epic meltdown from mr. Big sac 👍
Nice! Have you ever cracked it for a perfect pour, minimal sanding required? I wanna see someone pour a movie bar, ya know?
Cheers from Melbs 🇦🇺🇦🇺🇦🇺
Loved that copper bar. Another awesome creation. Great job
God that aluminum pours all sexy-like. this is what i needed today.
Aw, Ingot!! Too adorable.
Bigstack your videos keep getting better and better... camera work, editing, and all. Nicely done!
With this amount of precious metal, he can make at least one or two iron man suit🤷🏽♂️
Nice! A beer on a cold day and good hot metal melting from BigstackD. Keep the winter warming vids coming mate. Cheers!
Can you try and make a nice copper cement brick?
Like a giant heavy bit of copper (10kg or more), in the mold of a cement brick?
That is a badass collection, my brother!
Cheers buddy 😁
Shelf is getting full, time to make a aluminum, brass and copper TRESURE CHEST. Aluminum body, brass supports, copper accents. Fill it full of your coins.
As a thirty year veteran of scrap collecting I find this compelling viewing but of course there's no money in it. With the price of silver so low that's what you should be melting!
I do have a touch over a kilo silver which I will be melting in the future video but like you said there’s no big money to be made in scrapping , i’m just lucky I get all my scrap for free from my work as the boss lets me go through the scrap bin every now and then as long as I don’t abuse the privilege. I do how ever but my copper pipe offcuts from my plumber brother at $4 a kilo but as this is just a hobby I do on my days off if it costs me a few $$ Here and there I don’t mind . I love building my stack and I don’t ever sell it online or at the scrap yard 😁👍🏻
Вандал. За движки сердце кровью обливаеца))
Awesome. I really enjoy the motor melts. It's very enjoyable to see something taken apart and transformed. The bars turned out great to.Keep it up
dont know if you read comments but love you vids and would love to see you make your own brass with copper and zinc
Cheers mate glad you like them, I’ll definitely be doing my own brass in a future video so stay tuned matey😁👍🏻
@@bigstackD I'm still confused, is saying the word ''mate'' like saying friend but in Australia
Yes Kristian the word mate in Australia means good friend or buddy👍🏻.
Great shot of the bike in the background @ 2:32. I enjoy watching the aluminum get soft in the melting process. Excellent video! Cheers from New York🍻🍻
When shtf or zomie apocalypse comes can i be your security lol rs great content
I love the shine you got on that copper
So I see you put .999 on all of the bars. I'm thinking about starting my own operation, do you have to be accredited to be able to stamp that? Or do the bars have to be tested? Or could you just put .999 on whatever you want?
Matey you melt the metal you make the ingot you make the rules you could melt a big pile of brass shine it up and stamp it as gold if you like you’re in charge. Even if it’s only 50% pure you could stamp whatever the hell you like I put .999 as I believe that copper to be bullion quality as all imperfections and crap has been removed and it’s pure clean beautiful copper👍🏻. Some people will have a different opinion and say you can’t do that but really you can do whatever you want there’s always gonna be some haters out there😁
That's one cute doggo!
Нормальный такой НЗ, металл всегда в цене.
Nice new jeep mate lol loved the aluminium that was satisfying
В будущем медь прировняют к драг металлам.Вот он и делает запас.
these videos have made me look at things in a new way. Instead of seeing a broken vacuum cleaner in the dump, I see a motor that is begging to be melted into a beautiful bar. When I see cracked aluminium wheels at a junkyard, I see dozons of ingots. Every metal thing I see is an ingot that should be cast.
P.s. nice motorcycle! You should come to the Sturgis rally sometime.
Гробит исправные двигателя.
Годные моторы с редукторами! Хоть подъемник двери в гараж, хоть таль на балку, хоть еще какую полезную вещь можно было сделать... Мудак в общем... столько полезных вещей загубил.
@@konstantinakavivalzard2039 Там не принято изобретательствовать как у нас,что то сломалось,выкинул нах и купил готовый девайс.
Хмм, вы уверенны в том что двигателя исправны? Там люди далеко не глупые, и знают ценность таким вещам. Двигателя сгоревшие, перемоткой вряд-ли кто-то займется, так как это не рентабельно. А так будет материал в виде слитков.
Dog takes a bow. Nice!
Я понимаю если это было хотя бы серебром))), но алюминий и медь??? хранить на полке? ничего не понимаю)
ingot man he's an icon absolutely beautiful and the real owner of the channel XD
Перемотать, заменить подшипники и продать.
It amazes me so many people who put a dislike on your videos, why do people watch it if it’s something they don’t like, keep up the great work anyways love watching the vids
В конце -
собака сломалась.
Great video! Always love seeing little Ingot in your videos. The copper ingot came out beautifully. Well done! Thanks for all of the great videos!
👌🏻😁
я бы давно все это, сдал в метал
и я! хули он собирает все?
Вот по этому мы и живём в самой богатой стране в мире! У нас так принято, "СДАВАТЬ"!
@@ВасилийБелый-р4т Широка страна моя родная...
Много в ней лесов, полей и рек...
(а ещё много всего, что можно безнаказанно уничтожать, продавать и воровать...)
Когда руки из жопы и нет мозгов, единственное что приходит в голову глядя на это - сдать!)))
@@che3054 Вот из чистого любопытства, а какие мысли приходят на ум тебе? Я так понял по концовке ролика что автор видео в итоге таки это все и так сдает, просто видимо у них не принимают лом в таком виде как у нас, вот он и морочится с переплавкой.
Another Awesome video! Thanks for sharing!
😁👍🏻
Lmao Bruh why are all these comments Russian? You got a secret to tell everyone big stack 🧐
Putin upvoted so they followed.
I am always hypnotised by your videos bud, and it's great when all you have to pay is the gas and fuel for your car!!! Awesome bud.
А теперь скажите, почему ЭТО у меня в рекомендованных видео?
Ютюб, ты свихнулся?
The beautiful union flag proudly displayed. Subscribed.
😁👍🏻🍻🍻welcome aboard my friend 👌🏻
I don't understand are you can stamp .999 without a proper assessment??? It maybe close, but it seems that you're kind of guessing as well
rsl6767 it’s his metal for his purposes and for his own projects. He can stamp them Fine Copper Butt Nuggets .999 pure if he so chooses. He doesn’t seem to be selling the ingots so what he marks them with is irrelevant.
Your stack is getting huge!
Чувак это не канон ))канон закинуть в костёр после облить водой. и расхреначить кувалдой.
I love your work Big D AUSSIE! AUSSIE! AUSSIE! OI! OI! OI!
How can you make money with all of your gas use to remelt the metals? Learn to repair the motors and sell them you'll make much more money.
Nice work, beautiful dog👍😁