How to Make Arduino Gesture Control Robot | Wireless Glove Control | Mert Arduino

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 404

  • @maker101io
    @maker101io  3 ปีที่แล้ว +2

    Receiver: create.arduino.cc/editor/mertarduinotech/0047c82f-c2e4-4363-bad3-e9249aa1cf32/preview
    Transmitter: create.arduino.cc/editor/mertarduinotech/8159b962-4853-446a-b216-83add9044e80/preview
    Recommended Items:
    Use Your Muscles in Project - amzn.to/3wdL45C​
    37 Sensor & Module Packages - amzn.to/3m66WeQ​
    Try this Robot Arm - amzn.to/3fq8DCl​
    Best Resin 3D Printer - amzn.to/39tY8KB​
    Arduino Compatible Kits - bit.ly/2J2AFF7​
    Banggood Spring Sale - bit.ly/3slMbOn

  • @nikolasfactoras5626
    @nikolasfactoras5626 7 ปีที่แล้ว +2

    You inspire me to start robotic even with arduino. I am 16 years old and i am trying to be like you. Awesome videos. Thx for everything you have done to me even if you dont know it

  • @alienlightning
    @alienlightning 3 ปีที่แล้ว +2

    i made it...Everything works very well..thank you

  • @pathumpera
    @pathumpera 7 ปีที่แล้ว +2

    Oh my goodness. I waited for this for a very long time. Thank you so much Mert !!!

  • @webslinger2011
    @webslinger2011 5 ปีที่แล้ว

    For those having i2cdev and mpu6050 problem. Download and extract jrowberg-i2cdevlib zip file. Inside, there will be a folder named arduino. There's a folder for i2cdev and mpu6050. Copy and paste into your arduino library.

    • @prithurajbiswas4253
      @prithurajbiswas4253 5 ปีที่แล้ว

      thank you bro you save my life

    • @webslinger2011
      @webslinger2011 5 ปีที่แล้ว +1

      @@prithurajbiswas4253 You're welcome

    • @prithurajbiswas4253
      @prithurajbiswas4253 5 ปีที่แล้ว

      @@webslinger2011 sir with respect i have made the project but the motor is connected with 9volt batteries for some reason it is not working .PLEASE can you give me some suggestion

    • @webslinger2011
      @webslinger2011 5 ปีที่แล้ว +1

      @@prithurajbiswas4253 Using a small 9V battery might not supply enough current to drive the motors. Best to use 2 li-ion cells (7.4V) or 6 pcs AA batteries (in series) for power.

    • @prithurajbiswas4253
      @prithurajbiswas4253 5 ปีที่แล้ว

      Sir i will do exactly what you have said .THANK YOU for replaying

  • @code4bots879
    @code4bots879 2 ปีที่แล้ว

    what would you need to do to control several diferent units at the same time? like in a classroom environment?

  • @Robert-xw5ro
    @Robert-xw5ro 5 ปีที่แล้ว +1

    Hello !! Please answer .. I have the accelerometer ADXL 345 .. can you help me with the code to work like yours pls !!!!

  • @anukalptripathy7676
    @anukalptripathy7676 5 ปีที่แล้ว +2

    There is wrong in the transmitter glove code "when verifying the code the error is coming that mpu was not declared in the scope"

  • @adyanshuaryadeep4899
    @adyanshuaryadeep4899 6 ปีที่แล้ว +1

    bro pls answer the gyro accelerometer which i brought is not like urs
    on it is written gy-61 and it has pins like x-out, y-out and z-out

    • @aryanroutray9320
      @aryanroutray9320 6 ปีที่แล้ว +1

      are mun bi pauni

    • @benn_y
      @benn_y 6 ปีที่แล้ว

      U have brought the wrong one

  • @sulemanaddu
    @sulemanaddu 9 หลายเดือนก่อน +1

    thanks a lot buddy, after watching a lot of videos yours was the best, my car is working properly. ❤🤩

  • @diogomacedo5303
    @diogomacedo5303 5 ปีที่แล้ว +1

    On the car, do you only need to buy one of the kits? Or have to buy everything that is on the description?

  • @rababsoni7190
    @rababsoni7190 5 ปีที่แล้ว

    In the beginning, there is no antenna fixed on the glove and during the connections instead of the adaptor, the capacitor connections are shown. Can you please explain the connections using an adaptor using an antenna on the car and glove both?

  • @imranhameed9191
    @imranhameed9191 6 ปีที่แล้ว +1

    hi brother ,in your transmitter code , i having issues at two place ,
    1 : mpu.initialize();
    2 : mpu.getMotion6(&ax, &ay, &az, &gx, &gy, &gz);
    these two lines are showing error , what should i do

    • @emre-8198
      @emre-8198 5 ปีที่แล้ว

      i have same issue :( did you solve it?

  • @neerajverma2492
    @neerajverma2492 4 ปีที่แล้ว +1

    Bro everything is correct and power indicator are showing light but it is not working. Help me please.......

  • @abusohaila
    @abusohaila หลายเดือนก่อน

    Which program did you use to draw the electrical circuit ?

  • @maringuic2484
    @maringuic2484 6 ปีที่แล้ว

    waic can you do it with normal arduino uno and do you need two of them like one for the car and one for the glove?

  • @pranavbasarge664
    @pranavbasarge664 4 ปีที่แล้ว

    Sir does the cod affects if we use a ardino uno board

  • @ΧρηστοςΣπυρουλιας
    @ΧρηστοςΣπυρουλιας 6 ปีที่แล้ว

    Hello Mert i have big problem with the libraries for I2Cdev and mpu6050 your link for this libraries doesnt work.

  • @justmobilegaming6381
    @justmobilegaming6381 6 ปีที่แล้ว

    Pls do answer this Mr. Mert Arduino, at 3:19, when you connect 2 sets of wires, one from the battery hold and other from the breadboard to the motor driver, how exactly do u do That?Do u solder the wires, in fact if anyone knows can I please have a reply😺

  • @puvanapriyapalaniappan5102
    @puvanapriyapalaniappan5102 5 ปีที่แล้ว

    Can we the nrf24l01 module without antenna. If so what is it's range

  • @tonitoquiteno4136
    @tonitoquiteno4136 6 ปีที่แล้ว +1

    hello I have a problem in carrying out the project the car is left running around in circles, could you help me?

  • @林詠勝-z1p
    @林詠勝-z1p 2 ปีที่แล้ว

    Excuse me, if nrf24L01’s Vcc to 5v, it won’t burn out?

  • @androidemulation5952
    @androidemulation5952 5 ปีที่แล้ว +3

    Thank you for the upload. Could you make a video to use the gloves to do simple tasks on the computer.
    I'm thinking of building a similar project, however for controlling my pc instead of an RC. Any help is much appreciated.

  • @KodKahve
    @KodKahve 7 ปีที่แล้ว

    Excellent channel. I want to ask are you Turkish?Is your name Mert?

    • @emrerodos6515
      @emrerodos6515 7 ปีที่แล้ว

      Ben Programcı evet Türk

    • @KodKahve
      @KodKahve 7 ปีที่แล้ว

      Emre Oruç kaç yaşında?ve nerede yaşıyo?

    • @emrerodos6515
      @emrerodos6515 7 ปีที่แล้ว

      Orasını bilmiyorum

    • @KodKahve
      @KodKahve 7 ปีที่แล้ว

      Emre Oruç eyvallah kardeşim :)

    • @resultuzen
      @resultuzen 7 ปีที่แล้ว

      Beyler arkadaş Türk değil. Sadece ismi Mert.

  • @fabiolagualli7919
    @fabiolagualli7919 2 ปีที่แล้ว

    Hola @MERT Arduino & Tech me podrias ayudar que SW usa para hacer la simulación de las conexiones

  • @demerval7
    @demerval7 6 ปีที่แล้ว +6

    I've just made it, owesome, the best!

    • @renarayana4177
      @renarayana4177 6 ปีที่แล้ว

      brothwr can you pleae help me in getting i2c library the project is in 2 days

    • @hakaudz8705
      @hakaudz8705 6 ปีที่แล้ว

      hello can you please help me i have a problem in this project

    • @rajaniviswanath7910
      @rajaniviswanath7910 5 ปีที่แล้ว

      Can u give me ur number

    • @rajaniviswanath7910
      @rajaniviswanath7910 5 ปีที่แล้ว

      Dermeval please help me with this project I want it for next month

    • @yashwantkumar3233
      @yashwantkumar3233 4 ปีที่แล้ว

      I was unable to download "I2Cdev" library.
      Can you help me ?

  • @rahuljayekar2685
    @rahuljayekar2685 7 ปีที่แล้ว

    Hey Mert can i use two bluetooth modules for tx and rx purpose? and also i cant add the libraries. how to do it?

  • @normalbabaji
    @normalbabaji 6 ปีที่แล้ว +2

    Can we use bluetooth module or transmitter reciever R433M???pls tell....

  • @krdard5939
    @krdard5939 6 ปีที่แล้ว +3

    RF24.h: no such file or directory when I add code to the glove

    • @justmobilegaming6381
      @justmobilegaming6381 6 ปีที่แล้ว

      You have to download certain libraries from Github for it to work

    • @khaledaljundi6365
      @khaledaljundi6365 4 ปีที่แล้ว

      @@justmobilegaming6381 and if you know how i can add libraries to the code help me please

  • @gurtdereli3499
    @gurtdereli3499 5 ปีที่แล้ว

    Dronumu telefonun jiroskop özelliği ile kontrol etmeyi düşünüyordum beni büyük bir yükten kurtardiniz teşekkür ederim.Bu arada antenli menzili kaç?

  • @indranisahu770
    @indranisahu770 6 ปีที่แล้ว

    How is the Arduino Nano board getting power as you have not connected any usb cable to the Arduino Nano

    • @Sshkazi
      @Sshkazi 6 ปีที่แล้ว

      Indrani Sahu it gets power from a 8v battery which is connected to the breadboard

  • @vedant6091
    @vedant6091 5 ปีที่แล้ว

    Hi. I am having trouble using the source code (for the glove) and have tried many options. In the Arduino application, I was trying to verify the code from the link in the description. When I hit verify, it said this: Error compiling for Arduino Nano. I believe that it is saying that the code is not for an Arduino nano. What I am confused about is how the glove uses an Arduino Nano and the code won't work for one.
    I surfed and understood that we need to download libraies but whch libraries can you help me out please. I need to show display in fair tommorow.

    • @rohitjg
      @rohitjg 5 ปีที่แล้ว

      turn off antivirus and try..

  • @Michael-hr5wf
    @Michael-hr5wf 5 ปีที่แล้ว

    Can these be used to to turn a powerful stepper motor?

  • @kadircalin3510
    @kadircalin3510 6 ปีที่แล้ว

    Hocam fritzing ile devre kurarken alıcı verici kullanıyorsunuz. Ama arabanın şasesinde ve eldivende gözükmüyor. Yardımcı olabilir misiniz bu konuda ? Malzeme listesi elimde ama yapamıyorum. Bir eksiğim var.

  • @konyal368
    @konyal368 6 ปีที่แล้ว +6

    Türk'ün farkı İngilizce videolar ama olsun biz Türk kardeşlerimizi destekleriz

  • @tarunkaundar5508
    @tarunkaundar5508 4 ปีที่แล้ว

    i just wanted to know that can this glove be optimized to control drone???

  • @shutterboy19
    @shutterboy19 6 ปีที่แล้ว +4

    please help me i am not getting the second library

    • @salonipatel3409
      @salonipatel3409 4 ปีที่แล้ว

      just download the whole 12Cdevlib
      after that go to Arduino file and then there is 12Cdev remove that move that to the desktop from 12Cdev lib
      There you go

    • @yashwantkumar3233
      @yashwantkumar3233 4 ปีที่แล้ว

      @@salonipatel3409 Hi, I was unable to download "I2CDEV" library.
      There is so many files, which one to download?
      I m confused

  • @Patrick-xg5tt
    @Patrick-xg5tt 5 ปีที่แล้ว

    Can i use the same transmitter and receiver but different motors and batteries??

  • @iniyansaravanavel2954
    @iniyansaravanavel2954 ปีที่แล้ว

    Can we use adxl345 accelerometer for this ?

  • @tommasomonello4971
    @tommasomonello4971 4 ปีที่แล้ว

    I just built this project, it worked but somehow it stopped working i think bacause of some communication problems with the antennas. I have the adaptor and the antenna, any suggestions???

  • @emrerodos6515
    @emrerodos6515 7 ปีที่แล้ว

    Videoyu izledikten sonra ben----Vay ne kadar güzel hemen bende yapmalıyım (yapamadı) ---- yine çok güzel bir proje teşekkürler❤️

  • @AztecGaming107
    @AztecGaming107 6 ปีที่แล้ว

    can i attach the nrf module with 3,3v from the arduino board ? i heared that 5v will fry the module!!

  • @dianachinezon582
    @dianachinezon582 5 ปีที่แล้ว +3

    Hey there! Great tutorial, thank you so much.
    Could you please tell me what is the name of the SW you are using to show the connection between the different parts of the robots (starting from 3:02, in the vid).
    Thanks a lot!

  • @srijithsenthil9760
    @srijithsenthil9760 6 ปีที่แล้ว +2

    Motors start spinning after 2 seconds and car does not detect hand gestures. Is there any solution to this? Plss help!

    • @neosmagnum2474
      @neosmagnum2474 5 ปีที่แล้ว

      Senthil - Did you resolve the problem?

  • @alivine3303
    @alivine3303 4 ปีที่แล้ว +1

    You are awesome! I have ordered parts and designed everything with your help how ever I was not able to download the code from your link! Can you get back with me it asap!!

  • @hariprem9768
    @hariprem9768 6 ปีที่แล้ว

    Are those codes in libraries of mpu,.....are to be dumped into arduino or only source code one?? Please do reply it is urgent !!

  • @josephgomez1681
    @josephgomez1681 4 ปีที่แล้ว

    did you just hot glue the hardware onto the glove?

  • @farrellshah5573
    @farrellshah5573 7 ปีที่แล้ว

    hey the project is really cool but i tried to perform it again but i am having problem in programing the glove, there are some issues with the code you have provided so maybe you can look into it

  • @uvtheprince9792
    @uvtheprince9792 6 ปีที่แล้ว

    can we make the same robot with 12 volts DC motor or it will not support?

  • @xiaohuiwang9745
    @xiaohuiwang9745 7 ปีที่แล้ว

    Hey, thanks for your work, I cannot open the link for the MPU6050 Arduino library, can anyone help? Thanks!

  • @ix-11sohamsinha31
    @ix-11sohamsinha31 6 ปีที่แล้ว

    This is one of the best vdo s ever on topics like this but can you please tell that the code provided by you can it be directly uploaded or needs to be changed

  • @ashachaplot576
    @ashachaplot576 7 ปีที่แล้ว +3

    Mert u are awesome
    Dont forget me
    We meet earlier
    I am aditya we meet on facebook
    👍👍👍👍👍👍👍👍👍👍👍👍

  • @khandelwal_8080
    @khandelwal_8080 4 ปีที่แล้ว

    Can i use rf instead of nrf

  • @josephgomez1681
    @josephgomez1681 4 ปีที่แล้ว

    How do you get I2Cdev library added properly??

  • @rockstar_coc2827
    @rockstar_coc2827 3 ปีที่แล้ว +1

    Sir if you reading this , please comment back , i am having a issue in operating my receiver circuit...
    I have completed the circuit more then 10 times and very carefully but having a same issue all the time , as i connect my battery with the circuit , without even my transmitter is on , the motor starts rotating..i am not any solution for this , so please help me sir... And more more thing the POW led is glowing , only L led glows in transmitter's Arduino nano

  • @sokkikumar
    @sokkikumar 5 ปีที่แล้ว

    If we don't want to use antenna , is the connection not required

  • @muhanadhameed6226
    @muhanadhameed6226 7 ปีที่แล้ว

    Thanks in advance .... all of your projects are amazing ... I will wait for every new project ... good luck

  • @alinaderi7818
    @alinaderi7818 6 ปีที่แล้ว

    HI,can i use adxl g sensor instead of mpu?

  • @thidaswinathsara6164
    @thidaswinathsara6164 7 ปีที่แล้ว +2

    Code explaination is not clear, it's telling error compiling for board arduino nano WHEN "verifing" and last 2 libries have the same name when download, is it enough downloading 12CDEV only without MPU6050??? PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ ANSWER!!!!!!!!!!!!!

    • @thidaswinathsara6164
      @thidaswinathsara6164 7 ปีที่แล้ว +1

      OK OK I GOT MY FAULT, LIBRARY FILE ERROR, THANK YOU MERT ARDUINO!!!!!!!!!!!!!!

    • @vishaargn33
      @vishaargn33 6 ปีที่แล้ว +1

      i've also encountered with the same error..
      please help me....

    • @thidaswinathsara6164
      @thidaswinathsara6164 6 ปีที่แล้ว

      mmm.... I tryed to make the car lot of times but didn't worked.

    • @vishaargn33
      @vishaargn33 6 ปีที่แล้ว

      At least can you please help in correcting the code..like tell me where i've gone wrong..
      cos i'm not able to upload the code..

    • @narendraagarwal1176
      @narendraagarwal1176 6 ปีที่แล้ว

      Same here bhai agar time koi solution milenga you mujhe jaroor batana please don't forget

  • @BillBobbobyy
    @BillBobbobyy 3 ปีที่แล้ว +1

    Can you do a robot arm version of this pls

  • @ChalkGaming109
    @ChalkGaming109 5 ปีที่แล้ว

    can u help me? My problem is : "exit status 1
    Error compiling for board Arduino/Genuino Uno." from : Transmitter-glove-code

  • @danklord900
    @danklord900 4 ปีที่แล้ว

    can i use adxl 335 in place of gpu6050

  • @jayakrishnans2785
    @jayakrishnans2785 5 ปีที่แล้ว

    will it work when i add a 10uf capacitor to nrRF24L01

  • @sanjulanipun
    @sanjulanipun 6 ปีที่แล้ว +1

    I assemble the all part but not warking receiver code not available data

  • @shivhansoti8634
    @shivhansoti8634 6 ปีที่แล้ว +2

    Hey can you make a video of gesture controlled drone system using arduino uno?

  • @vishnukantasoni392
    @vishnukantasoni392 6 ปีที่แล้ว

    hey i didn't understand the libraries there are so many libraries which one we should take

  • @divadoge5584
    @divadoge5584 3 ปีที่แล้ว

    Can use 12v dc motors?

  • @gazanfarakhtar8702
    @gazanfarakhtar8702 6 ปีที่แล้ว +2

    we have to write the source code or copy paste it?????

  • @Great-fanoth-d3v
    @Great-fanoth-d3v 6 ปีที่แล้ว

    Mert abi ben de proje yapıcağım fakat bu fritzing de yaptığın bağlantıda L298N motor driverlarda hani kırmızı ve siyah kablolar var ya onlardan diyelim kırmızı L298N sürücü pil yuvasının artısına hem de nanoya gidiyor ya ben bu bağlantıyı anlamadım ikisini de yani pil yuvasının eksisini alıcam sürücünün vidasının altına ve bir tane de kısa jumper alıp nanoyamı takıcam bunu bana bir açıklar mısın

  • @rollnumber0196
    @rollnumber0196 7 ปีที่แล้ว +1

    The awesomest channel for projects detailed presentation ❤💙

  • @thidaswinathsara6164
    @thidaswinathsara6164 7 ปีที่แล้ว +4

    OK OK I GOT MY FAULT, LIBRARY FILE ERROR, THANK YOU MERT ARDUINO!!!!!!!!!!!!!!

    • @danklord900
      @danklord900 4 ปีที่แล้ว

      plese help me should i only upload the souce code in the nano board

  • @muhamadauliakartego1513
    @muhamadauliakartego1513 6 ปีที่แล้ว

    My library mpu6050 not colored orange, is that a problem ? . I cant run my control car ..

  • @danklord900
    @danklord900 4 ปีที่แล้ว

    where should i put the libaries

  • @AkashJain-hc6eh
    @AkashJain-hc6eh 7 ปีที่แล้ว +1

    Can we use bluetooth module instead of wireless module

  • @princeuv1237
    @princeuv1237 6 ปีที่แล้ว

    can we do the same with 12 volts motor ?

  • @RahulRaj-yg9ik
    @RahulRaj-yg9ik 5 ปีที่แล้ว

    thank you very much sir....i was working on it from 3 years and your video really helped me to made this.

  • @ahmadzakkone1964
    @ahmadzakkone1964 6 ปีที่แล้ว

    can the project work if i only use transceiver and not use the adapter?

    • @tekler1282
      @tekler1282 6 ปีที่แล้ว

      ahmad zakkone yes, it does work

  • @_ZEPTO_
    @_ZEPTO_ 2 ปีที่แล้ว

    What can be the voltage of the 10uf capacitor

  • @MrRapmann
    @MrRapmann 6 ปีที่แล้ว

    Does it not matter which Board? I will use the Arduino R3. Is it same Source Code? Thank you

    • @rohitjg
      @rohitjg 5 ปีที่แล้ว

      yes same code

  • @yenle7296
    @yenle7296 6 ปีที่แล้ว

    How can I find mpu and i2c download button on github?I can only see the folders

  • @fatihtoprak8818
    @fatihtoprak8818 7 ปีที่แล้ว

    Mert bey öncelikle mükemmel proje için teşekkürler sayenizde çok şey öğreniyorum. Bu robotu yaptım fakat calismadi. İzninizle bir kaç sorum olacak. İlk sorun MPU6050 için bizler kendi yerleşim duzenimize gore kalibrasyon yapacakmiyiz? Diğer sorum ise Video aciklamalarindaki kütüphane sayfalarına gittiğimde bir çok dosya mevcut. Acaba sadece yazılımda ki kütüphane ismi olan dosyayı mı ekleyecegiz yoksa tamamını mı? Kolay gelsin iyi çalışmalar

    • @fatihtoprak2186
      @fatihtoprak2186 7 ปีที่แล้ว

      Öncelikle sorunuza karşılık geç cevap yazdığım için kusura bakmayın. Siz cevap yazdığınızdan beri bir çok metodu denedim. Dediğiniz gibi MPU6050 yi ters yerleştirmişim. İlk sorun buymuş. Ancak asıl sorun jumper kablolarımdan bir kaçı arızalıymış. Çalışmama sebebi buymuş. Bütün jumper kablolarımın sağlamlığını test ettikten sonra sağlam olanları kullanarak çalışır duruma getirdim. Her şey için teşekkür ederim. İlgiyle sizi izlemeye devam ediyorum. Sağlıcakla kalın...

  • @cloudeyt4665
    @cloudeyt4665 4 ปีที่แล้ว

    I have only one nano can I use Arduino UNO for the other

  • @omkarjoshi6252
    @omkarjoshi6252 6 ปีที่แล้ว

    i m getting this error while uploading receiver code
    Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Uno"
    Sketch uses 5572 bytes (17%) of program storage space. Maximum is 32256 bytes.
    Global variables use 452 bytes (22%) of dynamic memory, leaving 1596 bytes for local variables. Maximum is 2048 bytes.
    An error occurred while uploading the sketch
    This report would have more information with
    "Show verbose output during compilation"
    option enabled in File -> Preferences.

  • @renusharma4810
    @renusharma4810 7 ปีที่แล้ว

    First of all you are the best innovator in India👍👍💐.Secondly which type of battery we can in order to get long time work done from the car or whether we use solar panel??

  • @heinhtetsoe63
    @heinhtetsoe63 6 ปีที่แล้ว

    Finally, I've got the best tutorial for my project,, thanks you so much bro, ur video is the best I've found...We could make a perfect project by watching your tutorial... thanks a lot bro

  • @arnabshaw3870
    @arnabshaw3870 5 ปีที่แล้ว

    The code for Transmitter is not compiling and especially there's a problem with "I2Cdev.h" library. Plz provide a proper link to manually add the library!

    • @rohitjg
      @rohitjg 5 ปีที่แล้ว

      download library from other website

  • @venugopal8492
    @venugopal8492 6 ปีที่แล้ว +1

    Is complusery to use 3.7 v 18650 battery

    • @kosmy8
      @kosmy8 6 ปีที่แล้ว

      Also have the same question, they are pretty expensive also....

    • @rohitjg
      @rohitjg 5 ปีที่แล้ว

      no, you can use duracell 9v battery

  • @srajanjain2541
    @srajanjain2541 7 ปีที่แล้ว

    Awesome video mert....can we control drone with this type of gloves...plz tell me

  • @karan_2120
    @karan_2120 6 ปีที่แล้ว

    Which background music it is ? Not understood the video.. how to write our own program ?

  • @lessonslearned5869
    @lessonslearned5869 6 ปีที่แล้ว

    Need help. Ive build this and Im using 6v power supply but my voltage to motor is only 1V. Motors are running very slow.

  • @sudipta8864
    @sudipta8864 6 ปีที่แล้ว

    Can i use a four wheeler chassis

  • @05s81
    @05s81 5 ปีที่แล้ว

    Can I use any other li -ion battery instead of 18650?

  • @lessonslearned5869
    @lessonslearned5869 6 ปีที่แล้ว

    Hi
    Im completely new to this but im having trouble adding the i2cdev and gpu codes as they do not appear as zip files in github. How do I download these. Thanks in advance

    • @rohitjg
      @rohitjg 5 ปีที่แล้ว

      download library from other website

  • @manansukhlecha
    @manansukhlecha 6 ปีที่แล้ว +6

    Someone please help...I can't control the car with the glove(I've made everything correctly)....Also the motors start spinning just 2 seconds after I start the car...PLEASE HELP...I NEED TO SUBMIT THIS TOMORROW

    • @manansukhlecha
      @manansukhlecha 6 ปีที่แล้ว +1

      @Julian Seabury It failed..😭😭

    • @webslinger2011
      @webslinger2011 5 ปีที่แล้ว

      I think you'll need to adjust the values : if(data[0]>300 && data[0] < 360): etc.
      if(data[0] > 330 && data[0] < 360 && data[1] > 130 && data[1] < 160){
      //stop car

    • @neosmagnum2474
      @neosmagnum2474 5 ปีที่แล้ว

      Did you resolve this?

    • @webslinger2011
      @webslinger2011 5 ปีที่แล้ว

      @@neosmagnum2474 Yup, it worked well on my setup.

    • @neosmagnum2474
      @neosmagnum2474 5 ปีที่แล้ว

      @@webslinger2011 The codes' working fine - Uploading showed no errors, but the Motors do not spin . . .

  • @sarthak8942
    @sarthak8942 5 ปีที่แล้ว

    hello sir, this is one of the best aurdino project i have seen, the tutorial was so good that it made me understand things more easier. i al working on another aurdino waste segregator, i need your help to find out how can i make it. thanks a lot.

  • @marielladejesus5796
    @marielladejesus5796 4 ปีที่แล้ว

    Hello there, I tried to do this project on my own. I have just connected the battery with arduino nano and the L298N and then my L298N started to smoke so I removed it as soon as possible. Can you help me please. Thanks

    • @DALEKCHANNELYT
      @DALEKCHANNELYT 4 ปีที่แล้ว

      Maybe u put the wrong wiring or placed it in the wrong location or you soldered it wrong

    • @marielladejesus5796
      @marielladejesus5796 4 ปีที่แล้ว

      @@DALEKCHANNELYT currently I was able to connect all of them but according to the serial monitor, it is not receiving any data.

    • @DALEKCHANNELYT
      @DALEKCHANNELYT 4 ปีที่แล้ว

      @@marielladejesus5796 check if any of the components are heating up

    • @marielladejesus5796
      @marielladejesus5796 4 ปีที่แล้ว

      @@DALEKCHANNELYT none of them are. I'm assuming it has something to do with the coding? because I really double checked all of 'em , from components to wiring itself.

  • @mdshabab6564
    @mdshabab6564 6 ปีที่แล้ว

    Will this really work without any worry please tell me fastly because I want to make it for my science exhibition

  • @berkebilsev1578
    @berkebilsev1578 5 ปีที่แล้ว

    I gave Error message from ide I2CDEV_MPU6050-master "Missing 'maintainer' from library", What should I do?

  • @sahananagaraj4057
    @sahananagaraj4057 3 ปีที่แล้ว

    Plz some one help with this . Error compiling for board Arduino uno . Wat to do

  • @adhamatef480
    @adhamatef480 6 ปีที่แล้ว

    how did you add icdev library?? i can't download it ? ca you help please ?