After I heard you say $800 quote, I made my decision to paint it myself 💯. I live in California, so I’m not gonna pretend the shops out here won’t try the same shit
Yooo sweet job my dude! Really nailed down that OEM gloss black look. So, lemme type down the steps and do let me know if I got something wrong or I missed something: 1.- 400 grit sand down the part (and wash). 2.- Adhesion promote. 3 coats. Light/Heavy/Heavier. 2 mins between coats (do next step within 10 minutes of last coat). 3.- Primer. 2 coats. Light/Heavy. 10 mins between coats. 4.- 600 grit sand down to smooth to touch, but make sure to not remove any primer (and wash). 5.- Base coat. 3 coats. Light/Heavy/Heavier. 20 mins between coats. 6.- Clear coat. 2 coats. Light/Heavy. 10 mins between coats.
Thanks bro, I appreciate it :) You got it right but I added a few comments at the end for steps 3, 4 & 6 1.- 400 grit sand down the part (and wash). 2.- Adhesion promote. 3 coats. Light/Heavy/Heavier. 2 mins between coats (do next step within 10 minutes of last coat). 3.- Primer. 2 coats. Light/Heavy. 10 mins between coats. (you can apply max 3 coats if needed) 4.- 600 grit sand down to smooth to touch, but make sure to not remove any primer (and wash). (DON'T WASH) 5.- Base coat. 3 coats. Light/Heavy/Heavier. 20 mins between coats. 6.- Clear coat. 2 coats. Light/Heavy. 10 mins between coats. (you can apply max 3 coats if needed)
Great Job man it looks Amazing. I've maybe painted a handful of things that have come out as good as this and millions that came out horrific. I don't know if it's the Enviorment I paint in or the Product. Could be that I don't use the right grit of Paper or maybe I make my paint coats too heavy. But great job
Thanks man, I really appreciate it! All of the parts I added on the car I painted myself and if I could go back I would start with the piece that cannot be seen easily. I started with the spoiler and I sprayed some heavy coats and had to restart over again. Everything else came out perfect after that tho so just try using the grits I mentioned in the video and try using the same brand of paint if possible and you should be good :)
Anish Nothoo keep em coming bro. I’m a fellow Indian too(pretty sure u are as well but if u aren’t my bad) and only 19yrs old and u lowkey inspire me to learn more about car builds and stuff. Keep it up bro
Thank you for thiiis! I couldn't find a video online that explains the process thoroughly. Since its been a while that you did this project, does the paint still look good?
I did mine and after letting the lacquer dry for 48 hours I wet sanded and polished it. Two days later orange peel appeared so wet sanded, applied two thick coats of lacquer, left to dry 48 hours, wet sanded and polished again. It looks great but now a week later the orange peel has returned?
Good video bro, thanks for taking the time to show us how do do this. Next time, try and make sure you always speak into your camera/phone so we can hear you properly.
For sure, thank you for the feedback. This is an older video so the editing quality is not as great but I did make a newer painting video with better audio if this one is not clear enough
Anish Nothoo I missed wiping down a section when I resanded so when I sprayed the black coat on you can tell it’s not flat but the paint hit debris from the sanding stage giving a slight raised bumpy look if that makes sense lol
Tibb 3 shit Idk if you can sand it if it’s in the base coat... if it was in the clear coat that’s another story but I doubt you can sand it if it’s in the base coat..
Great job... I need to repaint my rear diffuser as the guy who installed it painted it and it came out a different shade of white .. I'm buying a cheap spray gun at harbor freight and ordering the white from Sherman Williams..my question to u is.. since its already painted white do u recommend a light sand and primer or just paint over the white like a coworker advise me too .. I pretty sure a light sanding is needed .. Thanks
Dexter Azurin dang sorry dude didn’t know the quality was that bad two years ago.. Check out the description tho and I did make a more updated video on my channel if you’d like to check it out 😄
Louie Ayala hmm I tried sanding the base coat and it ruined the whole thing to the point where I had to get a whole new spoiler. I’m not sure if applying clear over it will fix it though. My guess is probably not but you never know
Don't know if your still replying to this video but I went and sanded my front lip and rear diffuser down with 400 grit sandpaper. I will eventually be putting on the adhesive followed by the primer immediately but from the video it seems like you have to sand it down again after. Problem sandpaper was in limited supply where I went so all I have is the 400 grit and 1000 grit. Should I use another few pieces of 400 grit after or will the 1000grit do the trick?
Hey just saw your comment, i wouldnt sand anything right after adhesion promoter. it will completely ruin everything (learned that the hard way). i'd suggest applying your adhesion promoter, letting it dry, then applying your primer coats. Then sand it down with a 1000 after you're done all your primer coats then apply base coats. then on your last base coat sand one last time with 1000 then apply your clear. hope that helps!
Can you explain what did you do after the second coat of the flat black primer? Did you wet sand it? And what did you do after the wet sanding? Thanks bro
Of course! So after the second coat of primer I let it dry for 20 mins then I came back to sand it down. Did not wet sand just regular sanding. Wet sanding is usually done after the clear coat is applied which can be found on the next video after this one on my channel. If you want to watch the part in the video where I explain everything it starts at 5:00
@@przemysawkalamaja3536 hmmm i still have the parts on my car and they still look good. Not sure why you wouldn't put the clear coat tho. its helps with UV doesn't it?
how do you stop dust from landing on your paint bro? I have painted so many items and I have tried inside and outside and I get specs of dust all over the paint, it is so frustrating
i heard a tip was to wet the floor a couple hours before painting so the dust particles stick to the ground... Haven't tried it so can't say for sure but might be a good easy way
Paint is good, gone through 2 winters now and no chipping/flaking. I'm not sure if the paint i used has a flex agent but my side skirts are pretty flexible and those haven't chipped yet so i think you should be fine if you use the same paint i used :)
@@flex2125 With this Rust-Oleum 2x, you should not need a flex agent as it is designed for plastic and even fabrics. Adhesion promoter is always recommended, though. Rustoleum also has an automotive clear that is a bit tougher in a red and white can, usually at Walmart or Home Depot.
If your primer comes of it means you prob didn’t apply enough primer, sanded too much of the primer off or you didn’t apply adhesion promoter. The patchy result will occur if you don’t have a smooth primer which is the foundation of your paint job. What I would have done when the primer started coming off was to sand and re apply more primer. The different grit sandpaper you are suggesting might not make much of a difference and I would keep using the same ones I used in this video just to have less variables
Is the shopping list in the description just to do the diffuser? or is it to do all the rest too (side skirts etc). Seems a lot for just the diffuser (4x everything) ? Maybe I'm being naive I'm not sure :) Great vid
thats what i found from my orders on ebay : www.ebay.ca/itm/Fits-14-17-Infiniti-Q50-Side-Skirts-Pair-Left-Right-Unpainted-ABS-/371600852822?hash=item5685230756&_uhb=1 BUT the side skirts are not the same that't on my car for some reason. they may have ran out of it but keep looking on ebay and use the 15% promo code when they pop up to buy it :)
Anish Nothoo Thank you so much all i needed to know because I am painting my spoiler gloss black and thats all I am doing for right now and itll save me alot of money then paying someone
Angel Moreno ohh ok fair enough loll. The reason I did it was to minimize the chances of getting the orange peel look at the end and I guess it paid off to be a little patient and sand the primer. Don’t get me wrong I was so over sanding by the time I was done the project 😂 but you gotta do it
@@AnishNothoo Sorry, i was skipping around and didn't hear that portion. I worked at a body shop for a few years and dust particles is one of the biggest reasons why I had to quit.
james Gand aw man gotta try watching the whole thing next time pls 🤗 and yeah I know everyday I worked on this project and I had to clean myself after, I remember all the black dust particles up my nostrils yikes
Well looks like you completed your task, but I was just cringing the entire time watching you do that whole thing without even bothering to wear any respiratory or eye protection. You were breathing in toxic vapors that entire time from multiple cans of primer, paint and clear coat with nothing but a cracked garage door for ventilation. That was not smart man, you need to protect yourself if you ever paint again . I'd hate for you to get sick afterward.
Yeah the next day I had a really bad headache but I didn’t know it was gonna be that bad. I painted another few things a few days ago and was gonna get a painting mask but the markup on it was crazy so I decided to just use a surgical mask which wasn’t too effective but I couldn’t justify the price of the actual mask. Thank you for the heads up though, really appreciate that 😇
@@AnishNothoo Dude anything is better then nothing at all man. It's worth the cost to have one man if it just means you gotta save up for a month extra before you paint your next project so be it. Sorry that you didn't feel good that day I'm glad to hear that you're OK though I'm not hating on you at all man I'm just trying to look out for a brother. It isn't worth your health man I promise I get it sometimes a budget makes you wanna do things sooner than later but patience's the virtue of those who live long lives my friend.
I understand where you’re coming from and appreciate you looking out for me bro. I’ll definitely keep this in mind I never had anyone actually talk me through this like that. Thank you for that
![한반도 뒤덮은 거대한 비구름...'영하 40도' 찬 공기 몰려오고 있다 [Y녹취록] / YTN](http://i.ytimg.com/vi/T4m7E8lvkWs/mqdefault.jpg)
After I heard you say $800 quote, I made my decision to paint it myself 💯. I live in California, so I’m not gonna pretend the shops out here won’t try the same shit
Wow. Looks amazing. Going to follow this same procedure for my front lip spoiler and diffuser
Good luck! There’s an updated video on my channel if you wanna take a look
Anish Nothoo already checked it out. Earned a new subscriber 💯💯💯
Ahh thank you for the support bro!
Earned a follow for this great tutorial! Well done and I'll be following these steps with a couple pieces I'll be painting. Thanks!
Thanks for the support! I recently uploaded an improved version of this video on my channel if you want to take a look
Do you mind linking it? This was a great video and would love to watch the updated one.
Works for me. I just did my front lip in my size skirt diffuser.
“2,000 years later” made me laugh out loud. 😊
Yooo sweet job my dude! Really nailed down that OEM gloss black look. So, lemme type down the steps and do let me know if I got something wrong or I missed something:
1.- 400 grit sand down the part (and wash).
2.- Adhesion promote. 3 coats. Light/Heavy/Heavier. 2 mins between coats (do next step within 10 minutes of last coat).
3.- Primer. 2 coats. Light/Heavy. 10 mins between coats.
4.- 600 grit sand down to smooth to touch, but make sure to not remove any primer (and wash).
5.- Base coat. 3 coats. Light/Heavy/Heavier. 20 mins between coats.
6.- Clear coat. 2 coats. Light/Heavy. 10 mins between coats.
Thanks bro, I appreciate it :)
You got it right but I added a few comments at the end for steps 3, 4 & 6
1.- 400 grit sand down the part (and wash).
2.- Adhesion promote. 3 coats. Light/Heavy/Heavier. 2 mins between coats (do next step within 10 minutes of last coat).
3.- Primer. 2 coats. Light/Heavy. 10 mins between coats. (you can apply max 3 coats if needed)
4.- 600 grit sand down to smooth to touch, but make sure to not remove any primer (and wash). (DON'T WASH)
5.- Base coat. 3 coats. Light/Heavy/Heavier. 20 mins between coats.
6.- Clear coat. 2 coats. Light/Heavy. 10 mins between coats. (you can apply max 3 coats if needed)
@@AnishNothoo Sweet, you're the man!
@@AnishNothoois the clear coat give it the most glossy look, i did every thing but put the clear and it looks more matte then glossy.
@@marcoventimiglia5148 the black paint coat should still appear glossy but when you put the clear coat it will be even shinier
Great Job man it looks Amazing.
I've maybe painted a handful of things that have come out as good as this and millions that came out horrific.
I don't know if it's the Enviorment I paint in or the Product.
Could be that I don't use the right grit of Paper or maybe I make my paint coats too heavy.
But great job
Thanks man, I really appreciate it! All of the parts I added on the car I painted myself and if I could go back I would start with the piece that cannot be seen easily. I started with the spoiler and I sprayed some heavy coats and had to restart over again. Everything else came out perfect after that tho so just try using the grits I mentioned in the video and try using the same brand of paint if possible and you should be good :)
Bro ur videos are great, I’m looking to buy a 3.7L Q50 soon and the mods and tutorials ur putting out is extremely helpful
Thank you! These kind words make me wanna put out more content 😊
Anish Nothoo keep em coming bro. I’m a fellow Indian too(pretty sure u are as well but if u aren’t my bad) and only 19yrs old and u lowkey inspire me to learn more about car builds and stuff. Keep it up bro
Always be learning bro ❤️
Nice video
Gonna paint mines tomorrow
Thanks man helped me out!
Thank you for thiiis! I couldn't find a video online that explains the process thoroughly. Since its been a while that you did this project, does the paint still look good?
Thanks for watching!! Yes the paint still looks good 😊
Nice vid....just subscribed
Nice work
Thank you 🙏
I did mine and after letting the lacquer dry for 48 hours I wet sanded and polished it. Two days later orange peel appeared so wet sanded, applied two thick coats of lacquer, left to dry 48 hours, wet sanded and polished again. It looks great but now a week later the orange peel has returned?
I’m not sure how the orange peel returned because when you sand you are basically flattening the surface 🤔
👍 Keep up the great work!!
Do you need to sand the part with a disc sander before applying new paint?
Good video bro, thanks for taking the time to show us how do do this. Next time, try and make sure you always speak into your camera/phone so we can hear you properly.
For sure, thank you for the feedback. This is an older video so the editing quality is not as great but I did make a newer painting video with better audio if this one is not clear enough
nice video mahn!
Awesome video man! Can you do a proper brake caliper painting?
Kristof Mauban thank you! I was thinking of doing one but I think I’m gonna wait till I get new wheels first so it matches :)
I’m getting ready to cut and paint my stock diffuser gloss black. How much time did this whole process take you seems like
Multiple days.
If debris got on the paint while painting and ruined part of the finish . Should I re sand it down with 600 grit and start over in that section
Tibb 3 good question but what type of debris?
Anish Nothoo I missed wiping down a section when I resanded so when I sprayed the black coat on you can tell it’s not flat but the paint hit debris from the sanding stage giving a slight raised bumpy look if that makes sense lol
Tibb 3 shit Idk if you can sand it if it’s in the base coat... if it was in the clear coat that’s another story but I doubt you can sand it if it’s in the base coat..
Nice vid! Thank you! Noob question, but my lip will flex, will the final painted product crack if the lip flex?
depends how much it flexes. mine flexed as well since i scraped quite a bit but as long as it's not almost being folded in half it should be fine
Great job... I need to repaint my rear diffuser as the guy who installed it painted it and it came out a different shade of white .. I'm buying a cheap spray gun at harbor freight and ordering the white from Sherman Williams..my question to u is.. since its already painted white do u recommend a light sand and primer or just paint over the white like a coworker advise me too .. I pretty sure a light sanding is needed .. Thanks
George Medina I would definitely sand it a bit down to make sure you have an even surface to work with. Good luck!!
Hey bro I’ve seen some post that sand the gloss black paint before putting clear lacquer?
Umm idk if I would do that. You can try but try it on something you don’t care about first
Did you wet sand after the primer? Or did you use a dry piece of sandpaper? I used dry sand paper and it just left marks in the primer.
Louie Ayala after primer I used dry 600 grit sandpaper then after clear I wet sanded with 2000 grit I think
Bro can u list all items here i can barely read the letters from the can tyvm
Dexter Azurin dang sorry dude didn’t know the quality was that bad two years ago.. Check out the description tho and I did make a more updated video on my channel if you’d like to check it out 😄
Do you wet sand the base coat if there’s orange peel or do I just go ahead and put clear coat then get rid of the orange peel?
Louie Ayala hmm I tried sanding the base coat and it ruined the whole thing to the point where I had to get a whole new spoiler. I’m not sure if applying clear over it will fix it though. My guess is probably not but you never know
What brand is The Clear Coat?
The adhesion promoter is made by duplicate colour and clear coat/primer/paint is made by rust oleum
Nice Job... when will we see it on the car? Still waiting for the spoiler alert!!
GtBoy 4Life oh man I will try to upload it this weekend for sure :)) need to find some time to edit 😭
So my parts came primered do I only need the base coat and clear coat?
if you're 100% sure it's primered then yessir that's all you need ^
What are the brands for all you used
I got all of them from Walmart so you don’t need to get super expensive paint
How long do i have to wait after applying the final coat of clear coat
Bryan David Cocson I didn’t really wait a specific time I just waited 20 mins then decided after if it was ready or not based on if it’s dry to touch
@@AnishNothoo thank you 👍🏻👍🏻 awesome tutorial vid
@@Najia_ thanks for feedback!
Don't know if your still replying to this video but I went and sanded my front lip and rear diffuser down with 400 grit sandpaper. I will eventually be putting on the adhesive followed by the primer immediately but from the video it seems like you have to sand it down again after. Problem sandpaper was in limited supply where I went so all I have is the 400 grit and 1000 grit. Should I use another few pieces of 400 grit after or will the 1000grit do the trick?
Hey just saw your comment, i wouldnt sand anything right after adhesion promoter. it will completely ruin everything (learned that the hard way). i'd suggest applying your adhesion promoter, letting it dry, then applying your primer coats. Then sand it down with a 1000 after you're done all your primer coats then apply base coats. then on your last base coat sand one last time with 1000 then apply your clear. hope that helps!
@@AnishNothoo thanks for the tip.
@@AnishNothoo did you say in the video ten minutes between each primer coat?
@@AnishNothoo derp nvm saw the text in the top right.
Can I use the rustoleum cans from Home Depot that say they can be used for plastic wood etc?
As long as it looks like my cans the results should be the same, if they look different ur results may vary
How is the paint holding up ?
so far so good but obviously the front lip had rock chips nothing to do about that unfortunately :(
@@AnishNothoo thanks bro and I wanted to do this but i dint want the clear coat to start peeling of fading
Honestly it’s been almost 2 years with it and none of that has happened yet so I think you should be fine bro
Can you explain what did you do after the second coat of the flat black primer? Did you wet sand it? And what did you do after the wet sanding? Thanks bro
Of course! So after the second coat of primer I let it dry for 20 mins then I came back to sand it down. Did not wet sand just regular sanding. Wet sanding is usually done after the clear coat is applied which can be found on the next video after this one on my channel. If you want to watch the part in the video where I explain everything it starts at 5:00
Bro i couldnt find the adhesion promoter, what brand is it or can you send me a link to that product? Thanks
I found it at Canadian tire and the brand is dupli colour I believe. If you’re not in canada I would try to get it on amazon
How much materials out of all of them you have for both skirts and diffuser I need to use for just the diffuser?
What do you mean by material?
Can you please right down the paint and sanders you use ? Thanks
The adhesion promoter is made by duplicate colour and clear coat/primer/paint is made by rust oleum
Anish Nothoo all are rust oleum? I think I found it. Thanks
Anish Nothoo adhesion promoter, 2x primer, 2x base coat primer and clearcoat
Yup sounds about right 🙂
Where did you buy your products??
Ricardo Jimenez my painting supply I got them from Walmart and Canadian tire lmao don’t make fun of me 🤣
My friend, the painter told me that the lacquer should not be applied to the gloss paint. How is it?
Przemysław Kalamaja lacquer?
@@AnishNothoo yes, clear lacquer
@@przemysawkalamaja3536 hmmm i still have the parts on my car and they still look good. Not sure why you wouldn't put the clear coat tho. its helps with UV doesn't it?
Does anyone know where can get one of thoes
Brian Tavares eBay would be your best bet
how do you stop dust from landing on your paint bro? I have painted so many items and I have tried inside and outside and I get specs of dust all over the paint, it is so frustrating
i heard a tip was to wet the floor a couple hours before painting so the dust particles stick to the ground... Haven't tried it so can't say for sure but might be a good easy way
where did you buy the diffuser bro
Benson Kwok someone on a fb group!
Anish Nothoo can you send me the link？
You can get one from Stillen, or go to eBay. They’re usually about $80-120 and you can paint it to look better
How does paint look 2 years later?
Mint, I wish I could reply with a pic lol
Yeah to bad you can’t send pic, I was thinking about painting my lip, and I wanted to see how they look after a while
It’s perfect tbh and I even painted my new lip in a more recent video using that same method and it came out the same
Thanks dude, I’m forsure gunna do it
Does the paint crack over time ? Because of the sun or does it stay looking glossy ?
I recently polished it and saw no cracks
@@AnishNothoo how has it held up??
Do you have the exact names of the cans you used? Turned out so good I want to use the same ones lol
Gor Kikanian I don’t remember the exact name but i got them at Walmart
How is the paint holding?? In trying to paint part but it says i should use flex agent?? What is your opinion? Does this paint have flex?
Paint is good, gone through 2 winters now and no chipping/flaking. I'm not sure if the paint i used has a flex agent but my side skirts are pretty flexible and those haven't chipped yet so i think you should be fine if you use the same paint i used :)
@@AnishNothoo thanks for the reply. i guess i just have to go heavy on the adhesion promoter coats
@@flex2125 With this Rust-Oleum 2x, you should not need a flex agent as it is designed for plastic and even fabrics. Adhesion promoter is always recommended, though. Rustoleum also has an automotive clear that is a bit tougher in a red and white can, usually at Walmart or Home Depot.
How long did you wait before putting it on car?
one day but wait longer if you can
My primer started to come off when I sanded, why is that? And is that supposed to happen?
Also my final result was very patchy I’m not sure what I did wrong, maybe using a different grit of sandpaper to sand in the beginning of my project
If your primer comes of it means you prob didn’t apply enough primer, sanded too much of the primer off or you didn’t apply adhesion promoter. The patchy result will occur if you don’t have a smooth primer which is the foundation of your paint job. What I would have done when the primer started coming off was to sand and re apply more primer. The different grit sandpaper you are suggesting might not make much of a difference and I would keep using the same ones I used in this video just to have less variables
Anish Nothoo how much primer should I put on? I put 2 coats like the can told me too
You applied adhesion promoter as well underneath?
Anish Nothoo no, but I plan to now that I know to add it
Is the shopping list in the description just to do the diffuser? or is it to do all the rest too (side skirts etc). Seems a lot for just the diffuser (4x everything) ? Maybe I'm being naive I'm not sure :) Great vid
it's for everything haha, ideally you will use 1 can of paint per piece
bro, where did you buy all the parts? diffuser, front and trunk lips？
Benson Kwok dm me bro
Where did you get the side skirt?
thats what i found from my orders on ebay : www.ebay.ca/itm/Fits-14-17-Infiniti-Q50-Side-Skirts-Pair-Left-Right-Unpainted-ABS-/371600852822?hash=item5685230756&_uhb=1
BUT the side skirts are not the same that't on my car for some reason. they may have ran out of it but keep looking on ebay and use the 15% promo code when they pop up to buy it :)
Hows it holding up?
Still looks the same. The front lip however had some chips cause it’s at the front of the car but it be like that so 🤷♂️
Anish Nothoo awesome! Ill definitely do this
Could you just put some form of gloss if you wanted it black?
JOSH JIMENEZ what do you mean?
Anish Nothoo like the parts you got were basically already black what if you just put a glossy clear coat on them? That wouldn’t work?
JOSH JIMENEZ nah it wouldn’t, it would not even stick to the part properly
Is 400 grit ok??
flex2125 should be ok might look a little rough though
in the description u mentioned everything u need and the grand total was that for all the side skirts and everything or just for the diffuser u did
Fayme $155 for everything including front lip, side skirts, diffuser, and rear spoiler
Anish Nothoo Thank you so much all i needed to know because I am painting my spoiler gloss black and thats all I am doing for right now and itll save me alot of money then paying someone
Fayme goodluck have fun!
Anish Nothoo Can i get the 2 in 1 paint and primer they dont sell primer seperatley
Fayme i personally would try to find two separate cans just so I’m sure I have a thick enough layer
I tried spraying my car bumper...its not shiny as the body...what could it be?
I think it’s the weather to be honest, I sprayed mine during the summer so the temperature and humidity must have played a big role
Anyone else think it’s weird that he sanded a second time after applying primer?
Weird or not the final result speaks for itself 🤷♂️
100% agree... that’s why I liked the video lol. I’d just like the know the reason?
Angel Moreno ohh ok fair enough loll. The reason I did it was to minimize the chances of getting the orange peel look at the end and I guess it paid off to be a little patient and sand the primer. Don’t get me wrong I was so over sanding by the time I was done the project 😂 but you gotta do it
Anish Nothoo OHHH ok gotcha. That’s actually really smart. Thanks!
You sand so that the primer will be smooth..
I would definitely by mask for painting. The chemicals are nasty and can cause cancer.
Yessir hence why I mentioned to not be a dumbass like me in the video 😬
@@AnishNothoo Sorry, i was skipping around and didn't hear that portion. I worked at a body shop for a few years and dust particles is one of the biggest reasons why I had to quit.
james Gand aw man gotta try watching the whole thing next time pls 🤗 and yeah I know everyday I worked on this project and I had to clean myself after, I remember all the black dust particles up my nostrils yikes
Well looks like you completed your task, but I was just cringing the entire time watching you do that whole thing without even bothering to wear any respiratory or eye protection. You were breathing in toxic vapors that entire time from multiple cans of primer, paint and clear coat with nothing but a cracked garage door for ventilation. That was not smart man, you need to protect yourself if you ever paint again . I'd hate for you to get sick afterward.
Yeah the next day I had a really bad headache but I didn’t know it was gonna be that bad. I painted another few things a few days ago and was gonna get a painting mask but the markup on it was crazy so I decided to just use a surgical mask which wasn’t too effective but I couldn’t justify the price of the actual mask. Thank you for the heads up though, really appreciate that 😇
@@AnishNothoo Dude anything is better then nothing at all man. It's worth the cost to have one man if it just means you gotta save up for a month extra before you paint your next project so be it. Sorry that you didn't feel good that day I'm glad to hear that you're OK though I'm not hating on you at all man I'm just trying to look out for a brother. It isn't worth your health man I promise I get it sometimes a budget makes you wanna do things sooner than later but patience's the virtue of those who live long lives my friend.
I understand where you’re coming from and appreciate you looking out for me bro. I’ll definitely keep this in mind I never had anyone actually talk me through this like that. Thank you for that
What was the name of the base coat u used??
It’s called Rust-Oleum and i used that brand for primer, base coat and clear