How to paint polyurethane lip, diffuser, body kits, etc.
ฝัง
- เผยแพร่เมื่อ 5 มี.ค. 2022
- Here is a quick DIY video on how to prepare and paint polyurethane body parts.
Subscribe: th-cam.com/users/nogarage30?...
Follow me on Instagram @nogarage30
/ nogarage30 - ยานยนต์และพาหนะ
Real Good DIY Thank your for video
If applying clearcoat you can also get satin effect clearcoat
Good DIY. One thing you can try next time is to wash/clean the plastic before you sand it in case there is any mold release on the part as this would get ground into the part and could cause fisheyes in the final finish, dont ask me how I know this. The part looks great on the car, love the M5.
That makes perfect sense. Thanks for the tip!
Great video thanks man
good videos on e39 thank you Sir
Could clear coat be applied?
how long did you let the adhesion protecter and primer dry for?
I guess add clear coat step for gloss?
Looks great! Would you please put the paint color sku in your video description? Thank you.
When I look for the paint on Amazon the picture of the paint can in your video lists it as a charcoal while the black color spray can on Amazon shows a green label.
Just trying to figure out the really nice black color that you used.
Dupli-Color ETB101000 Trim and Bumper Paint, Black
@@NoGaragE30 Very cool! Thank you.
Nice wheels. Do you know what spec they are?
how long did it hold up, lookling to paint my bumper aswell
Still looks the same today, no issues. I wash it all the time too.
Can I do without the Adhesion Promoter I have a Stillen lip and they said it’s optional ?
My understanding is you risk the paint peeling off with time when you don't use adhesion.
Hey man, please help a fellow e39 m5 brother out. Where did you get that rear diffuser and how is the fitment? Thanks in advance.
This is the Slimmbones diffuser, one of the better options out there but a pain to prep and finish. I would go with the CF option if I had to do it again. Fitment is ok but dont expect OEM. statusgruppe.com/product/bmw-e39-m5-97-03-finned-rear-diffuser-by-slimmbones/
@@NoGaragE30
Thank you so much for your reply.
Quality control is non existent with Slimmbones …. Bought a CF one last year and if I line the diffuser up on one side there is a gap of more than an inch on the other!!
@@mikeyeh7646 You may want to check out this one. I ordered one a while back and have it in the box in my garage, just havent tried to install it yet. It is ABS so the finish is way better and I hear others are very happy with fitment.
facebook.com/groups/BMWgolia/
@@NoGaragE30 thanks man 🙏 I have ordered one from Etsy and the retailer is called Lasscar and it’s from Ukraine as well. Hopefully the fit is good. My local CF will use it to create the mould . He does have a 3D scanner but becomes super expensive if he has to do the CF diffuser from scratch. Having the ABS Diffuser cuts down the cost etc. thanks again 🙏🙏
Try not to touch with bare hand when prepping.
Where's the install video????
It is actually in need of editing.... I haven't had a chance to edit new videos in almost a year, maybe one of these days.
I have a polyurethane front lip. I didn’t do this prep and didn’t use adhesive promoter and each time I paint it it chips and cracks. If I prep it just like this I should be good? Has the paint cracked at all or anything?
I have had this on for over year now and it still looks great. Ask anyone in the biz and they will tell you paint is all about the prep work.
yess the paint usually chips on poly lips because either you didnt prime it or didnt use adhesion promoter so the paint doesnt have anything to grab on or stick too really nice. When base coat paint dries, it creates a hard layer on the slippery poly lip and will crack and chip over time then flake off. Happened to me many times
@@droptopp3479 i bought rear diffuser for a miata nc and i have bolt and screw onto the oem one , the difuser i bought i notice will have to bend to get screwed on , do you think after i paint it and trying to flex it on both sides to scew on the paint will crack ?
@@droptopp3479
What if the lip description says
(Primed lip) Ready to paint without prep... should i still do this?
No all aftermarket parts that say primed it's not you have to sand it that stuff that comes on its just to protect the part.Also were rubber painters gloves so you don't get acid s and stuff from your hands and fingertips
2k gloss it
i’ll pay you to get your wheel specs lol
No need for the primer. Just go from adhesion to paint
Why
💕 🄿🅁🄾🄼🄾🅂🄼
All that sanding is unnecessary all you have to do is paint it with paint and primer and a can of clean coat.
Why unnecessary?
How do you know
Both sanding and stripping poly of mould residue is required for a long term problem free finish.