सख्ताई से आए पेश- Dye Penetrant Inspection

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ม.ค. 2025

ความคิดเห็น • 1.8K

  • @rajvindersingh4860
    @rajvindersingh4860 3 ปีที่แล้ว +3

    Next cm of uttarakhand deepak rawat sir....kaun kaun sehmat he is bat se....🙋

  • @tam8413
    @tam8413 3 ปีที่แล้ว +12

    Just want to be same officer with this great passion in his work
    My class is 12 and I am still loving it

  • @raviraj3913
    @raviraj3913 3 ปีที่แล้ว +1093

    Sabse best video sir ki 4ladko vali hi h 😂😂🙌

    • @Akk42709
      @Akk42709 3 ปีที่แล้ว +7

      Konsi video bhai link bhejo

    • @SanjayYadav-fy7tv
      @SanjayYadav-fy7tv 3 ปีที่แล้ว +40

      Ha wo computer coaching wala 🔥😂😂

    • @NASAFANPAGE15
      @NASAFANPAGE15 3 ปีที่แล้ว +2

      Sai me funny the full

    • @anishgautam22
      @anishgautam22 3 ปีที่แล้ว +14

      हीरा सुपारी वाला🤣🤣🤣🤣

    • @btskpop5823
      @btskpop5823 3 ปีที่แล้ว +4

      @llb raviraj. Bilkul sahi bola bhai such mei bahut mast vdo thaa.... Isika 2nd part bhi aana chahiye

  • @Travel_fever18
    @Travel_fever18 3 ปีที่แล้ว +55

    This is called content creator 😅🤣😂🙏

  • @Oldschoolbadass
    @Oldschoolbadass 3 ปีที่แล้ว +135

    Sirji, I am a certified welding engineer. The first thing you must watch for welding inspection is a PWPS and WPS. That would determine the whole scenario. Next time ask the enginner to provide you with the same and make you understand it. Also they lied to you. The cleaner is applied just once. After application of the dye, you just wipe it with a cloth. If you again clean it with cleaner, you are hiding the cracks. However, cracks doesnot mean the welds have failed. You need to refer to right standards to determine that.

    • @satishkumardubey10
      @satishkumardubey10 3 ปีที่แล้ว +17

      Great reply...👌👍 They also performed DPT on final welded built up which is also wrong.
      I am certified mechanical contractor & Engineer.....😉😁😂👍

    • @AnshulKumar-gk1it
      @AnshulKumar-gk1it 3 ปีที่แล้ว

      You subscribe krk😂😂

    • @mdrashidreza4833
      @mdrashidreza4833 3 ปีที่แล้ว

      Correct

    • @shankarmahato1248
      @shankarmahato1248 3 ปีที่แล้ว +1

      Also they need UT to identify

    • @Hindu_Ram121
      @Hindu_Ram121 2 ปีที่แล้ว

      Exactly.. Spraying the cleaner on the penetrant directly hides all defects.

  • @mysmallroadtrips9834
    @mysmallroadtrips9834 2 ปีที่แล้ว

    Aap jese IAS sir sb jagah hone chaiye...👍👍💐💐💐 salute to your work and honesty.🙏🙏🙏🙏👏👏👏

  • @nitinpandey6111
    @nitinpandey6111 3 ปีที่แล้ว +247

    With all due respect,
    An IES officer should've been there in the place of an IAS officer.
    That not only would ensure quality, but would ensure efficiency at the same time.
    And efficiency is what our country desperately needs in order to become a developed country instead of a developing one!!

    • @JayPatel-ly1jt
      @JayPatel-ly1jt 3 ปีที่แล้ว +7

      Agreed

    • @Teenovation
      @Teenovation 3 ปีที่แล้ว +9

      Yes I agreed...An IES is supposed to check that stff 👋

    • @sharmavinit9382
      @sharmavinit9382 3 ปีที่แล้ว +1

      Yes you are right
      Here fitter testing welding test.and grinding..

    • @nikhilsharma2451
      @nikhilsharma2451 3 ปีที่แล้ว +27

      moreover sir needs to do homework before visiting the sites...

    • @punjabprofessional6337
      @punjabprofessional6337 3 ปีที่แล้ว

      Agreed

  • @GauravB.Ed.wallah
    @GauravB.Ed.wallah 3 ปีที่แล้ว +8

    IAS की वास्तविक तैयारी तो ट्रेनिंग के बाद surru होती है😂🔥🔥🔥💯💯🤗🤗🎊🎊🎉🎉

  • @minuparmilanegi6948
    @minuparmilanegi6948 3 ปีที่แล้ว +9

    Main aaj video ka hi intezar kar rahi thi aur video a gai Mera Sunday happy Ho Gaya ❤️🤣

    • @tn8014
      @tn8014 3 ปีที่แล้ว

      😂❤️

    • @Agriculturesp
      @Agriculturesp 3 ปีที่แล้ว

      😎😋ha aagi vdo

  • @Pinkimyra
    @Pinkimyra 3 ปีที่แล้ว

    आप जैसे बेउरोक्रेक्ट हर जिले में हो ।तो देश बदल जाये।🙏🙏🙏🙏🙏

  • @bhartiyasanatani
    @bhartiyasanatani 3 ปีที่แล้ว +20

    मै ने तो डाटा भाई नई... साहब आपकी आवाज ही काफी है।
    🙏🙏🙏🙏🙏
    जय जय श्री राम।
    हर हर महादेव।।
    🚩🚩🚩🚩

    • @hindubalak3161
      @hindubalak3161 3 ปีที่แล้ว +1

      जय श्री राम

  • @shyamkumarsinha7209
    @shyamkumarsinha7209 2 ปีที่แล้ว

    Insaan ho apke jaisa jo always dusro ko samjhe 👍👍

  • @ravilavarkofficial
    @ravilavarkofficial 3 ปีที่แล้ว +66

    सब लोग भगवान से🙏प्रार्थना करना हमारे जवान🇮🇳शहीदों की आत्मा को शांति दे🇮🇳🙏🏻🎉

  • @vandanakubde9445
    @vandanakubde9445 2 ปีที่แล้ว

    Very good work! Sir, I think our India All's IAS officer's Motivat from your good work .so very thanks sir!👌🏻👌🏻👌🏻👌🏻👌🏻👍🇮🇳

  • @nandurevankar2656
    @nandurevankar2656 3 ปีที่แล้ว +10

    Karnataka needs an ias officer like u sir god bless u sir

    • @vivan3996
      @vivan3996 3 ปีที่แล้ว

      Ravi channanavar is there as ips.. What more u want

    • @dhiruph
      @dhiruph 3 ปีที่แล้ว

      @@vivan3996 Duffer, IAS and IPS are 2 different depts. Duffer.

  • @abhisheknegi9342
    @abhisheknegi9342 3 ปีที่แล้ว +1

    Deepak sir ka style aur kauf dekh ke mza ata hai yr... respect to this man..❤❤

  • @anitamishra9974
    @anitamishra9974 3 ปีที่แล้ว +46

    We want more IAS officer like Deepak rawat sir ❣️❣️🙏

    • @sahilchoudhary5847
      @sahilchoudhary5847 3 ปีที่แล้ว

      th-cam.com/video/xHJhnOpfWDU/w-d-xo.html

    • @stylehaiboss6036
      @stylehaiboss6036 3 ปีที่แล้ว

      He is more like a poster boy rather then being as IAS

  • @Jaggu-Da_1993
    @Jaggu-Da_1993 3 ปีที่แล้ว

    Aap aur aapki soch bahut achchi hai ...Rawat ji......बड़े पेट वालों का इलाज कुछ है ही नही इंडिया में लिख के लेलो मुझसे।

  • @parasnegi9154
    @parasnegi9154 3 ปีที่แล้ว +12

    Thanks to DM that he conducted this kind of genuine inspection but the thing is that as per construction management procedures, the incharge of the site has to conduct this kind of detailed investigation on daily basis.
    That impatientness and mis conduct of operation shows that the incharge is not doing his job properly at all.

  • @parmartilakrajsinh9842
    @parmartilakrajsinh9842 3 ปีที่แล้ว +24

    3:27 the best part 👍

  • @Havegone
    @Havegone 3 ปีที่แล้ว +7

    Pass ho gya sunte hi sb khush ho gye.. Sir ne pass kr diya🤣🤣🤣🤣🤣🤣🤣🤣

  • @parakhparakh9326
    @parakhparakh9326 2 ปีที่แล้ว

    We want more as like Deepak sir,,,purre desh mai sudhr ho jayega,,,, salute sir ji

  • @RohitAgnihotri94
    @RohitAgnihotri94 3 ปีที่แล้ว +9

    Whensoever I watch you, zeal to crack the exam increase multifolds. Best regards and keep rocking.

  • @naturesloverprakirtipremi9023
    @naturesloverprakirtipremi9023 3 ปีที่แล้ว

    Aap jaise officer ki Bharat ko bohot zarurat hai

  • @shikshakalash
    @shikshakalash 3 ปีที่แล้ว +14

    बहुत अच्छा कार्य कर रहे हैं सर आप, काश हर अधिकारी ऐसे होते🙏

    • @sudeshvarma218
      @sudeshvarma218 3 ปีที่แล้ว

      Hai kya ya

    • @shikshakalash
      @shikshakalash 3 ปีที่แล้ว

      हरिद्वार के डीएम

  • @er.sanjaybishnoi7566
    @er.sanjaybishnoi7566 3 ปีที่แล้ว

    Ab is site ko ye sab log bar bar sikhenge or proper sikhayenge 👌👌👌👌👌👌👌👌

  • @yogeshsingh111
    @yogeshsingh111 3 ปีที่แล้ว +4

    Those engineer who finally become IAS officers, must love this testing or inspection

  • @TheKanhaiyalal
    @TheKanhaiyalal 3 ปีที่แล้ว

    Very informative video sir.. mujhe nahi pata tha welding test aise hota hai.. thank you for this inspection and sharing this informative video

  • @sugammishra7631
    @sugammishra7631 3 ปีที่แล้ว +146

    Inspecting an engineering work by an IAS officer will still promote loopholes in work.

    • @anubhavsinha1274
      @anubhavsinha1274 3 ปีที่แล้ว +21

      Exactly that why state government projects have so much faults because they don't have good post of Engineering responsible for engineering work ya pwd bridge corporation have many works of engineering stills comes under IAS which is wrong all Engineering work of state should be under pwd as they have engineers

    • @dhiruph
      @dhiruph 3 ปีที่แล้ว +7

      Because of stupid reservations.

    • @shubhamtiwari8881
      @shubhamtiwari8881 3 ปีที่แล้ว

      🤣🤣🤣🤣

    • @KartikChauhan__KC
      @KartikChauhan__KC 3 ปีที่แล้ว +8

      Well IAS officer only ensures that the employee's are doing their work properly and whenever they are out to inspect such things they have one member from that field with them.

    • @Chandan-um1tf
      @Chandan-um1tf 3 ปีที่แล้ว +7

      @@dhiruph with this mentality u can never be an ias officer🙂🙂🙂if u want to be🙂
      I m damm sure u will comment some worst, so before commenting introspect why this is given.

  • @fitnesskvideo6787
    @fitnesskvideo6787 3 ปีที่แล้ว

    Sir ke Jaise IAS officer Country ke Sabhi District me Hona Chahiye 👌

  • @kaustubhvengurlekar2725
    @kaustubhvengurlekar2725 3 ปีที่แล้ว +40

    Its not important if a IAS is qualified for checking this type of engineering work. Its is very important for an IAS to check this work becoz it is public property and very less IAS people check the quality of work on site.

    • @kaustubhvengurlekar2725
      @kaustubhvengurlekar2725 3 ปีที่แล้ว

      @RationalThinker ur right. SDM belongs to adminstrative department. Civil engineering works is most corrupt area in india and an administrator should check all the technical and non technical process.

    • @terminateriitian8020
      @terminateriitian8020 3 ปีที่แล้ว

      Yeah that's very important for our country

  • @sanjuchirathoddrathodd5490
    @sanjuchirathoddrathodd5490 3 ปีที่แล้ว +1

    I love dis man. Man of honor, man of respect , man of intelligent ,

  • @nehashuklaofficial5116
    @nehashuklaofficial5116 3 ปีที่แล้ว +16

    आपके पहले जोश भरे कदम से पता चलता है, कि आपकी सफलता कितनी बड़ी होगी ।

  • @tTheSudhir1234
    @tTheSudhir1234 3 ปีที่แล้ว +1

    Sir very proud of you if all officers will be like you our nation would be on top
    With great respect I appreciate you work and dedication

  • @mohit_kundu
    @mohit_kundu 3 ปีที่แล้ว +4

    After seeing the comments, it's good to know that our youth is well versed in their respective field.

  • @gadgetmanindia1604
    @gadgetmanindia1604 3 ปีที่แล้ว +3

    Sir's videos inspire IAS aspirants so much

  • @LokeshKumar-rq1yp
    @LokeshKumar-rq1yp 3 ปีที่แล้ว +4

    The most awaited video ,please upload videos of this lenght sir, wishing you a healthy life 👍

  • @AnilKumar-tm6fq
    @AnilKumar-tm6fq 3 ปีที่แล้ว

    I think you are very honest than other IAS Officers .

  • @nilotpolpatra3492
    @nilotpolpatra3492 3 ปีที่แล้ว +49

    When everybody tries to impress the IAS officer..but rather confuses him. Don't know the actual scenario , but these r pure technical field and I think for such inspection trained professionals must be hired.
    Also don't think fr structural application dye penetration is a reliable method.

    • @sudeshvarma218
      @sudeshvarma218 3 ปีที่แล้ว

      Jdm bada chutiya hai

    • @ankityadav-ld2wd
      @ankityadav-ld2wd 3 ปีที่แล้ว

      Exactly..

    • @zacheuslakra3650
      @zacheuslakra3650 3 ปีที่แล้ว

      Me too noticed the same..inspite of impressing him they managed to confuse him..every sector has these kind of people.

    • @vijaysinghrathore5030
      @vijaysinghrathore5030 3 ปีที่แล้ว

      Very right bilkul sahi likha hai

  • @yamrajajay9523
    @yamrajajay9523 3 ปีที่แล้ว

    Sir Bohot mast video he 🙏 mja a gya 😘😘😘

  • @AbhishekSingh-tx2tu
    @AbhishekSingh-tx2tu 3 ปีที่แล้ว +7

    I have worked as quality control engineer in a pipe industry where weld quality is most important aspect and there are various test to check welding quality. DPI is one of them which is used for surface crack . However X-ray or Ultrasonic is most reliable techniques which should be done regularly. And there should be some destructive test like tensile and compressive, flattening to find over all weld quality.

    • @pratapkumarmishra8297
      @pratapkumarmishra8297 3 ปีที่แล้ว +1

      Magnetic particle inspection test is also reliable and cheaper. Most important it demands less expertise compared to x-ray and ultrasonic testing.

    • @mritunjayhsm
      @mritunjayhsm 2 ปีที่แล้ว

      Its a part of NDT... It seems they are in hurry so crack would not be shown or developed... A cycle of this test needs 20 to 30 min time to see the fine line... Perhaps this job(work piece) is not as important other wise they will test it with patience...

  • @sudhanshusoni4308
    @sudhanshusoni4308 3 ปีที่แล้ว

    A good work by Deepak Rawat IAS Sir Big Fan

  • @dmbrovlog
    @dmbrovlog 3 ปีที่แล้ว

    There are some officer who are sleeping in ac room but u r real ias officer

  • @sagarkumar-nf3yo
    @sagarkumar-nf3yo 3 ปีที่แล้ว +20

    Dear sir
    1 Unsafe activity ,grinder used without safety goggles.
    Whenever grinder is used goggles are essential PPE

  • @longseyjenlong6328
    @longseyjenlong6328 3 ปีที่แล้ว

    Sabka fat gya saaallllaaaa 🤩🤩🤩👍❤️❤️❤️❤️... very good sir 👍👍👍

  • @AdityaSingh-lr4mo
    @AdityaSingh-lr4mo 3 ปีที่แล้ว +2

    Toughest time for these people infront of rawat sir 🤣🤣🤣🤣🤣

  • @rehaanmansoori9789
    @rehaanmansoori9789 3 ปีที่แล้ว

    Mujhe to sir ki video sab pashnad hai 😍😍😍🥰🥰🤗

  • @840869kk
    @840869kk 3 ปีที่แล้ว +9

    Sir,
    It's was Liquid Penetration Test(LPT), & it required ASNT level- II person.
    FITTER fit-up the 2 piece of material which is going to weld with proper ASME/API section.
    A grinder get the finishing of weld with proper safety.

  • @mohanpachpute6640
    @mohanpachpute6640 ปีที่แล้ว

    Sir we want in every district one Deepak Rawat Sir.Then India become corruption free.

  • @bhaskardatt5403
    @bhaskardatt5403 3 ปีที่แล้ว +8

    Radiographic testing (X RAY) is recommended for welding inspection. Obviously DPT is inexpensive and available in field condition but it has some limitation as it's principal is based on capillary action. DPT can't detect void in welded joint.

  • @ArvindSharma-os2tt
    @ArvindSharma-os2tt 3 ปีที่แล้ว

    Namaskar Sir Welding Ka DP Test bhi dekh liya DP Check karne ke baad welding mai Pin hole ho jata hai to welding theek nhi hua hai
    Kya baat hai sir Salut hai sir apko

  • @shabdsrivastava9050
    @shabdsrivastava9050 3 ปีที่แล้ว +11

    Maturity is when you realise this is not the official channel of IAS Deepak Rawat 😂.Just a fan made page

  • @meharban4662
    @meharban4662 2 ปีที่แล้ว

    Yes. Some expert in quality of welding must hv accompanied with Deepak Rawat sir. Contractor befool those who are not expert in this field.

  • @qualitytrainingforqc8965
    @qualitytrainingforqc8965 3 ปีที่แล้ว +7

    DPT test is surface defect test
    Principal is based on capillary action
    1) step clean the surface
    2) apply cleaner and remove by lintcloth
    3) apply the penetrant after applying penetrant start progating in to defect area for this 10 minutes dwell time is given the after that again remove the penetrant by using cleaner no penetrant shall be seen on surface so that after applying the developer only penetrant which is progated in defect will bleed out if any defect is seen analysi and repair inspection shall be done by level 11 person

  • @jitb0310
    @jitb0310 3 ปีที่แล้ว

    सबकी हवा टाईट 😅🤣🤣
    Salute to you sir🙏🙏

  • @igumzels6033
    @igumzels6033 3 ปีที่แล้ว +18

    Sir i want to be an IAS like you in future.

    • @abhipandey4198
      @abhipandey4198 3 ปีที่แล้ว +1

      Lo bhaiiii ek or prajati 😂😂😂

    • @igumzels6033
      @igumzels6033 3 ปีที่แล้ว

      @@abhipandey4198 Haji bhai lol

    • @dollartoomuch2950
      @dollartoomuch2950 3 ปีที่แล้ว

      Beta study krni padti hai

    • @igumzels6033
      @igumzels6033 3 ปีที่แล้ว

      @@dollartoomuch2950 Tho kisnebola study nahi karna hai? dimak karak hai kya?

    • @abhipandey4198
      @abhipandey4198 3 ปีที่แล้ว

      Bhaiii dimag sahi se likh le kya ias Banega ve tu....😂😂

  • @rohitlodhi.uk0454
    @rohitlodhi.uk0454 3 ปีที่แล้ว

    Ek dam active rhete hai sir to good job sir ji 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

  • @UMERFarooq-ih7se
    @UMERFarooq-ih7se 3 ปีที่แล้ว +5

    Most honest officer I have seen .

  • @ankitsaroj6106
    @ankitsaroj6106 3 ปีที่แล้ว +1

    Deepak Rawat is real hero

  • @TheAzharuddin
    @TheAzharuddin 3 ปีที่แล้ว +8

    I work in a public department for the government of Queensland, and have to see my states Premier every now and then. We call her by her name , we never call he MADAM. It is my dream to see India change for good and I hope one day it will.

    • @ashwinshrivastava9655
      @ashwinshrivastava9655 3 ปีที่แล้ว

      Abhishek ji yeh India h aur uparse shriman IAS h 😂 is janam me to na ho payega yeh change India me.

  • @aprealnagavlog2365
    @aprealnagavlog2365 3 ปีที่แล้ว

    Har state mei aisa officer hona jaruri hai 👍👍👍 jai hind 🙏

  • @Ravi_yadavsaab
    @Ravi_yadavsaab 3 ปีที่แล้ว +192

    महात्मा गांधी = गाँधीगिरी
    नरेंद्र मोदी = नेतागिरी
    दीपक रावत = प्रश्न पूछतगिरी 😂

    • @DeepuPlayz18
      @DeepuPlayz18 3 ปีที่แล้ว +9

      Bhai puchna hi padta hai knowledge aise hi badti hai 🙄

    • @sudeshvarma218
      @sudeshvarma218 3 ปีที่แล้ว +6

      Uttarakhand ke Dalal hai yah sab

    • @themadmonk7677
      @themadmonk7677 3 ปีที่แล้ว +2

      Bas pucho sunno kisi ki na

    • @swapna6041
      @swapna6041 3 ปีที่แล้ว +1

      @@DeepuPlayz18 right

    • @N._.SR1
      @N._.SR1 3 ปีที่แล้ว +5

      Pappu= comedy giri

  • @rakeshmistri6554
    @rakeshmistri6554 3 ปีที่แล้ว

    सर आपके जैसा हर किसी को होना चाहिए हमारा देश सुधर जाएंगे धन्यवाद सर

  • @smanpreet2612
    @smanpreet2612 3 ปีที่แล้ว +9

    Wah yaar kya IPS.. faltu ki galtiyan nikal rha hai jo bnda thda stressed hai uski. He seems too confident in finding mistakes. He should boost confident instead of finding mistakes.

    • @everythingmissing9629
      @everythingmissing9629 3 ปีที่แล้ว

      IAS

    • @MB-ij7ox
      @MB-ij7ox 3 ปีที่แล้ว +2

      You do two things immediately right after you see my comment
      1. Diffrence between a IAS and IPS
      2. TAke online grammar courses and read newspaper daily..

  • @rupamhasam6229
    @rupamhasam6229 3 ปีที่แล้ว

    Sir Aap etna bariya kam kar raha he na bash dill khus ho gya

  • @deveshkumar5360
    @deveshkumar5360 3 ปีที่แล้ว +31

    Wrong procedure for dye penetrant test showed to DM
    Step 1 - apply cleaner/remover and wipe off
    Step 2 - apply dye on the surface, the wipe off dye with cloth.
    Step 3 - apply developer, so that dye come out of defect holes.

    • @yedukrishna6603
      @yedukrishna6603 3 ปีที่แล้ว +2

      As well as keep 25 cm away from spraying

    • @mukhtarkhan1538
      @mukhtarkhan1538 3 ปีที่แล้ว

      Wrong procedure for DPT shown
      What type of engineering team is it ?

    • @bharatriba8297
      @bharatriba8297 3 ปีที่แล้ว

      @@mukhtarkhan1538 what's the right procedure then?? Kindly let us know guruji

    • @rubbertoe4342
      @rubbertoe4342 3 ปีที่แล้ว +1

      Cost savings use the same cloth and apply dye before the cleaner is dried off. What a Mucken circus...

  • @surinderkamboj4736
    @surinderkamboj4736 3 ปีที่แล้ว

    D.M sar tusi Grate to sab aap jase ho to hindustan Amrika ban jave ga rab aap nu lambi umer dave jai hind sir

  • @rounaksingh0
    @rounaksingh0 3 ปีที่แล้ว +11

    Best idea to test this is :- by using a light bulb or simple phone flashlight 👍 one man will go inside the box and one will show light from top ... When the light will seen by inner man he has to mark there with chalk , and then weld it 👍 ..... I am a non degree mechanical engineer 🙏 jai hind 🇮🇳

    • @millionsofbooks130
      @millionsofbooks130 3 ปีที่แล้ว

      This kind of test is super flop because crack formed can be complex
      That's why u don't know anything about structural things👍

    • @deveshkumar5360
      @deveshkumar5360 3 ปีที่แล้ว

      हाहाहा, भाई जुगाड के बाहर भी एक दूनिया है।

    • @deveshkumar5360
      @deveshkumar5360 3 ปีที่แล้ว

      Cracks can be very minute, dye pentrant and ultrasound are few scientific way to find them, not torch light.

  • @sarthakagarwal6994
    @sarthakagarwal6994 3 ปีที่แล้ว

    Sir u are the real inspiration for new generation. Sir big fan of urs

  • @grepandey
    @grepandey 3 ปีที่แล้ว +3

    Sir fitter checks for fitting of plates.
    Generally for speeding up process welder and fitter both are pressed to work to utilise maximum efficacy.
    As welding equipment is costlier (like on site electricity generator and inverter welding equipment) overall cost lowered when used in combination.
    I think fault check was explained well in last so no comments on that.

  • @pramodrawat9617
    @pramodrawat9617 2 ปีที่แล้ว

    यही हमारे देश का दुर्भाग्य है जिसे जहाँ नहीं होना चाहिये वो वहाॅ है

  • @syedathar9505
    @syedathar9505 3 ปีที่แล้ว +13

    That's method comes under NDT i, e Non destructive testing method and this method is know as liquid Penetration method. Very easy but need attention.

  • @RajeevSinghMuzaffarpurBihar
    @RajeevSinghMuzaffarpurBihar 3 ปีที่แล้ว +1

    Iteal person... great sir.. 👍 to

  • @vivekchamoli13
    @vivekchamoli13 3 ปีที่แล้ว +12

    3:27😂 ohhhhhhhhhhhhhhhhhhhhhhhh

  • @vishalthakor6922
    @vishalthakor6922 2 ปีที่แล้ว

    🌹🌹LOVE FROM GUJRAT🌹🌹
    🌹🌹NICE VIDEO🌹🌹

  • @bipintiwari6880
    @bipintiwari6880 3 ปีที่แล้ว +21

    Only NDT Level-II certificate holder can perform Dye Test and sign report on it
    Shocking that fitter was performing Dye Test. Also, Dye test can only detect surface deformation, UT or radiography is best to detect internal deformation.

    • @sumairshaik1620
      @sumairshaik1620 3 ปีที่แล้ว +6

      Yeah ..that was very unprofessional..Even the Engineers didn't knew the Dye Penetration Test procedure..
      There is a huge gap in the education system..
      Being an Engineer..I started my career as an NDT Tech

    • @abhijeetshrivastawa6827
      @abhijeetshrivastawa6827 3 ปีที่แล้ว +2

      Bhai DM ko kya pta kayse hota hai
      Oh to hm engineers ko pta hai n ki test glt kiy hai sb😂😂

    • @abhijeetshrivastawa6827
      @abhijeetshrivastawa6827 3 ปีที่แล้ว +1

      Etne pass se spray kiya gya test sb barbad ho gya😂😂😂

    • @sumairshaik1620
      @sumairshaik1620 3 ปีที่แล้ว +4

      @@abhijeetshrivastawa6827 Han...dwell time bhi nahi diya

    • @prasadkalaga7399
      @prasadkalaga7399 2 ปีที่แล้ว

      Yes

  • @swatantrasharma7561
    @swatantrasharma7561 3 ปีที่แล้ว

    GOD BLESS YOU DEEPAK RAWAT JI JAI HIND JAI BHOLE NATH JAI BHARAT

  • @tusharkukrety4626
    @tusharkukrety4626 3 ปีที่แล้ว +6

    3:54
    He : ghabarana nhi .
    Worker : * does what he wasn't supposed to do * 4:18
    😆😆😆

  • @samirsiwan1904
    @samirsiwan1904 3 ปีที่แล้ว

    Jitna bhi tarif ki jaye wo kam h sir love u sir

  • @fireandwater6462
    @fireandwater6462 3 ปีที่แล้ว +6

    Questioning is the begining of intiligence sir questions evry thing 😂

  • @buckhouse5268
    @buckhouse5268 3 ปีที่แล้ว

    Sir Your are motivation for thousands of aspirants I am your big fan

  • @niranjanchakraborty1907
    @niranjanchakraborty1907 3 ปีที่แล้ว +8

    If this man is truly honest then he must take some action at least one big political leader but never did like this because he is a show-off king. 👍

    • @hk39302
      @hk39302 3 ปีที่แล้ว +1

      They are not CBI, Why should he go against any political leader he is their to provide administration for the laws and schemes made by govt for people of India.
      Why people vote for dishonest political leaders, it's the duty of people to unite against those political leaders who are corrupt.
      Corruption in politics can only be removed by people who vote. But people doesn't have time for thinking and acting for right causes and like to blame officials for their own failures.
      Most of the people have became selfish , they only think about themselves then how come there will be change and honesty.
      It must start from the base level.
      There is a lack of morals in public of our country they only like to play a blame game .

    • @GekkoSeven
      @GekkoSeven 3 ปีที่แล้ว +1

      big political leader ? that's where we as a voter to choose a good candidate. we voluntarily elect a corrupted person and later ask the administrative officer to arrest/inspect ?

  • @mg9esports52
    @mg9esports52 3 ปีที่แล้ว +1

    Sari video dak liya ap ka channel ka

  • @Roemic390
    @Roemic390 3 ปีที่แล้ว +15

    Sirr mask🙏🏼🙏🏼🙏🏼

    • @neerajSharma-cf4lq
      @neerajSharma-cf4lq 3 ปีที่แล้ว +1

      Bhai sardiyo ki vdo h ye😂🤣

    • @Lakshay69
      @Lakshay69 3 ปีที่แล้ว +1

      2019 ki h check description

  • @praveenkhugsal6458
    @praveenkhugsal6458 3 ปีที่แล้ว +1

    Deepak sir.... Iam huge fan of you.... Ihope you read this.....
    Its a 6G testing of welding....
    And every critical welding should be tested in RT.
    Anyways if it is a DPT.....
    The surface should be clean thoroughly with cleaner ....
    After that penetrator should be put and developer should be used to find any pin holes and all.
    Test should be conducted by a quality Engineer not by a fitter or a welder...
    Every joint should be done by a 6G welder and he/she should carry a valid welder card for that.....
    Hope to get a better uttarakhand...
    Regards
    A true uttarakhandi❤

  • @eastandwestguriisbest3843
    @eastandwestguriisbest3843 3 ปีที่แล้ว +3

    Sir ik baat bolun jhooth bol rha hai ye 10:30 se lekr bilkul mujhe nhi lagata kunki beech main ched hue the red colour aaya tha aapko bewakoof bana rha hai 🔥

  • @jonathanwhite5950
    @jonathanwhite5950 2 ปีที่แล้ว +1

    The dye setting time is 10 min and then the developer time is also 10 min . To properly test for the defects . The engineers on site were acting like a bunch of people in school scared on a practical exam day not like they do it everyday and fit it wrong too!

  • @jammupigeongallery2361
    @jammupigeongallery2361 3 ปีที่แล้ว +3

    sir ap na mask nhi dala hai corona bapis lana hai kya plz mask dalo 🙏🏻🙏🏻

    • @soneoydan6525
      @soneoydan6525 3 ปีที่แล้ว

      Plz watch discrimination, it's 2019 video

  • @SurajRajput.777
    @SurajRajput.777 3 ปีที่แล้ว

    Wa mere bhai dil khus ho gya .

  • @bittu2018-v7r
    @bittu2018-v7r 3 ปีที่แล้ว +8

    बड़े अधिकारीयो के पास जाओ
    हमेशा गरीब मजदूर और आम आदमी पर ही करवाइए करते हो

  • @NavHaryanaTimes
    @NavHaryanaTimes 3 ปีที่แล้ว +1

    Best h sir aap

  • @tapovanvashisht9435
    @tapovanvashisht9435 3 ปีที่แล้ว +23

    This IAS is trying hard to justify his existence as an officer even when he doesn't know anything about the job being done. Better to have inspection done by people who are qualified to do so. Publicity stunt is good.

    • @AnkitKumar-ii4qx
      @AnkitKumar-ii4qx 3 ปีที่แล้ว

      He is cross checking whater the experts are giving correct information or not he have his experts with him it's just to ensure that no one is corrupt and sending the wrong report to the office it is very easy to hire people but you heve to keep a eye on just like you keep on checking everything when you build your house have some respect for him bro in this kind of projects karoro ka gotala happens and later on accedent happen IAS for a reason great man

    • @millionsofbooks130
      @millionsofbooks130 3 ปีที่แล้ว

      For ur kind inf let me know u IES is already there
      Every work is tested at many levels je,Ae, executive and according to tender value (by superintending engg)
      But since DM is highest authority of all departments in a district he is supposed to give final assent (tech inspection is not his part of job he is a good officer because he's trying to learn all these)

  • @indirapanda7633
    @indirapanda7633 3 ปีที่แล้ว

    India needs this kind of officer I salute you
    Please give us some tips To crack I. A. S. Exam

  • @BipinGaikwad09
    @BipinGaikwad09 3 ปีที่แล้ว +6

    I wonder how much tests they have done before.they didn't knew proper process,welder was not appropriate for that job . Finally the guy who done testing was probably with higher post who fortunately had some knowledge .

  • @srivastavnavneet8789
    @srivastavnavneet8789 3 ปีที่แล้ว +1

    Kabhi Up ki haalat bhi sudhr jaye aap jaisa koi accha officer aa jaye

  • @stylehaiboss6036
    @stylehaiboss6036 3 ปีที่แล้ว +3

    Being INDIAN… I’m very sad to say … that … INDIA is great country… theoretically but practically our country is far behind to be a great country… because every one or mostly people are self centric…. Some people like to do buttering and also some people like to get buttered….

  • @rahulrajbharr
    @rahulrajbharr 3 ปีที่แล้ว +1

    Agar sab kuch mil jayega zindigi me tammanah kiski ki karoge 🔥 kuchh adhuri khwaeshe zindigi jeene ka maza deti hai 🔥🔥🔥

  • @gkshorts2765
    @gkshorts2765 3 ปีที่แล้ว +8

    Sir for doing this test a qualified NDT TECHNICIAN MUST be present..its not the fitter responsibility after welding...

  • @krishnagrg776
    @krishnagrg776 3 ปีที่แล้ว

    Deepak sir ka kaam bahud badiya hai Bhagwan aapko hamesh khus rakhe sir ,,
    sir aap log mask bhi pahen lijiye plz

  • @agritech2.039
    @agritech2.039 3 ปีที่แล้ว +4

    मै ये सोच रहा हूं कि ऐसे ही सभी अधिकारी क्यों नहीं होते।