Bro Min alpine 905 .. should i need it to install. I have Alpine 509In dash and Focal EXPERT PS165V1 with coaxial Focal and Morel 5 channel amp with Under seat Alpine subwoofer. Still do I need DSP to install. Your Suggestion would be appreciate and I purchase if required.
This DSP has a sigle TDA/TDF type based IC for sound amplification. This is a 2 inch IC . Compare to this any 4 channel amplifier will have atleast 8 transistors for sound , 4-8 mosfet for power supply along with plathora of driving electronics components, transformer both for supply and audio. So very clearly you can make out what setup will make better sound power and quality... Moreover driving this IC to full load like 60x4 load , it will make a lot of heat beyond capability of small cahisis to handle it. This heat willl affect life and performance of DSP section and overall equipment. Now , 60X4 is 240 rms of output. Which would need atleast 300 watt of input power. Do check the size of supply circuitrary and wires of his if they are enough to handle 300+ watts!! For tweeters / midrange these amplifier are good enough. No issues. But even that not for SQ !
@kdeep1690_ does the 4 channel high output have EQ options, i mean can we change the mode and preset from this output? Below are the things i have. Honda city stock head unit Rockford Fosgate T1675 components for front and rear. Hertz 4 channel Amplifier. Nakamichi NDSK4185AU I have installed the component speakers to the stock head unit. I have placed an order for DSP. My questions are 1. how can i take a line IN to the DSP? 2. Can i use the Hertz 4ch Amp to power the 4 woofers and use the 4 channel high OUT from the dsp to power the 4 tweeters? 3. If i am able to power the tweeters from the HIGH OUT of the DSP, will i be able to control the EQ and every DSP setting to the tweeters? Extra note: I have an extra 2ch AMP with me if needed please help me sort out this.
Which infotainment unit support 360 degree camera? And is there any camera which has inbuild sensors too or we have to install sensors and camera separately?
Guyz this dsp will change ur music quality... way better than any high low converter... I have it in my car... with OEM HU... runing 4 components 90 w with a 100 w amp. I had a high low convert before ... now its this dsp ..the sound have become super duper ... a lot of customization. Has inbuilt bluetooth for music and has an app with cn be used to set the dsp ... no laptop needed. If u don't know how to tune it... don't worry ..the simplest thing to do is set the eq of dsp to ur components frequency range with a slop which does not exceeds the low frequency of ur component... eg: st HP at 40/50/60 feq depends on ur component lowest feqand with a 36 to 47 db slope and LP at 20k with no slope ie slope off. Mids and other eq can be set as per your liking .. main gain should be at max 75 or ur mids will Crack at a very high volume... cheers
I bought the Deaf bounce M6C high low converter in JAN 2023, using it on RCD330 I will definitely say it's equivalent to Nakamchi DSP. Thanks to sohil sir for recommending this 6 channel converter rather than going for Nakamchi. It helped me save some bucks 😊
@@sohilpruthiakaautomobileguruji you are an inspiration. Your knowledge on car Audio is mind-blowing ❤️ please keep sharing more videos. I will continue to share your videos and support you sir 🔥
Sir i am from hyderabad i wanted an experienced and fully knowledgable person for car audio i am fedup with my car audio that too after installing pioneer zf8550bt with audison amp and audison 100watt rms components i am getting very high treble sound and distortions in mid and bass please suggest me where do i go for to get excellent sound quality please reply
Hey Sohel, Need some advice I have Kia sonnet, I upgraded the music set up with Sony ES series (Components, Coaxial and Subwoofer all ES) and Sony GS4 amp for speakers and Sony GSM100 amp for subwoofer, most tracks sounds awesome. However the pain point is many old tracks sounds very bad infact it cracks, if I listen same old tracks on my home theatre it sounds perfect also these tracks sounds perfect on my iPhone. These tracks use to sound good with my cars factory speakers. I tried all combinations to set the amplifiers and this problem is not related to amp setting those are perfect. Can someone guide 1. what has went wrong in my new setup ? 2. What is missing ? 3. Is there any configuration I am not aware ? 4. Will DSP help here ?
does the 4 channel high output have EQ options, i mean can we change the mode and preset from this output? Below are the things i have. Honda city stock head unit Rockford Fosgate T1675 components for front and rear. Hertz 4 channel Amplifier. Nakamichi NDSK4185AU I have installed the component speakers to the stock head unit. I have placed an order for DSP. My questions are 1. how can i take a line IN to the DSP? 2. Can i use the Hertz 4ch Amp to power the 4 woofers and use the 4 channel high OUT from the dsp to power the 4 tweeters? 3. If i am able to power the tweeters from the HIGH OUT of the DSP, will i be able to control the EQ and every DSP setting to the tweeters? Extra note: I have an extra 2ch AMP with me if needed please help me sort out this.
I own innova crysta with 4 speakers mercury R62 with an arc audio mini Ks 125 amp and an stock headunit no subwoofer. I would really like to purchase a dsp from you according to ur recommendation
Meri creta kar hai mere gadi Mein Android system Laga Hai bluepankha do speaker pianer ke Do component Pioneer Ke Lage Hain iske liye kaun sa amplifier Lagana chahie Aap Mujhe Bhi Ja sakte hain kya main aapko payment Dal deta hun
Bro Min alpine 905 .. should i need it to install. I have Alpine 509In dash and Focal EXPERT PS165V1 with coaxial Focal and Morel 5 channel amp with Under seat Alpine subwoofer.
Still do I need DSP to install.
Your Suggestion would be appreciate and I purchase if required.
3v Preout (RCA) from Head Unit is Good For Amplifier or Not??
Bro really a bit under rated channel…but star will be changing soon for your knowledge , experience & services..Hats off to your zeal….
As you mentioned its power is 60 watt rms so can we use this dsp to power components like Steg Leo or blam express without using a separate amplifier?
same my question
Yes you can. I am using nakamichi ndsk 4165 with mercury r62 component and they really sound fantastic. But pl remeber to hook a 4ohm speaker only.
Below 60 Watt RMS speaker will be drive in this but in low volume gain.better you can add on amplifier for better results
This DSP has a sigle TDA/TDF type based IC for sound amplification. This is a 2 inch IC . Compare to this any 4 channel amplifier will have atleast 8 transistors for sound , 4-8 mosfet for power supply along with plathora of driving electronics components, transformer both for supply and audio.
So very clearly you can make out what setup will make better sound power and quality...
Moreover driving this IC to full load like 60x4 load , it will make a lot of heat beyond capability of small cahisis to handle it. This heat willl affect life and performance of DSP section and overall equipment.
Now , 60X4 is 240 rms of output. Which would need atleast 300 watt of input power. Do check the size of supply circuitrary and wires of his if they are enough to handle 300+ watts!!
For tweeters / midrange these amplifier are good enough. No issues. But even that not for SQ !
@kdeep1690_ does the 4 channel high output have EQ options, i mean can we change the mode and preset from this output?
Below are the things i have.
Honda city stock head unit
Rockford Fosgate T1675 components for front and rear.
Hertz 4 channel Amplifier.
Nakamichi NDSK4185AU
I have installed the component speakers to the stock head unit. I have placed an order for DSP. My questions are
1. how can i take a line IN to the DSP?
2. Can i use the Hertz 4ch Amp to power the 4 woofers and use the 4 channel high OUT from the dsp to power the 4 tweeters?
3. If i am able to power the tweeters from the HIGH OUT of the DSP, will i be able to control the EQ and every DSP setting to the tweeters?
Extra note: I have an extra 2ch AMP with me if needed please help me sort out this.
I find this video very useful and cleared me confusion about DSP vs amplifier
What about audio setup only using dsp without a stereo.
Which infotainment unit support 360 degree camera? And is there any camera which has inbuild sensors too or we have to install sensors and camera separately?
Guyz this dsp will change ur music quality... way better than any high low converter... I have it in my car... with OEM HU... runing 4 components 90 w with a 100 w amp. I had a high low convert before ... now its this dsp ..the sound have become super duper ... a lot of customization. Has inbuilt bluetooth for music and has an app with cn be used to set the dsp ... no laptop needed. If u don't know how to tune it... don't worry ..the simplest thing to do is set the eq of dsp to ur components frequency range with a slop which does not exceeds the low frequency of ur component... eg: st HP at 40/50/60 feq depends on ur component lowest feqand with a 36 to 47 db slope and LP at 20k with no slope ie slope off. Mids and other eq can be set as per your liking .. main gain should be at max 75 or ur mids will Crack at a very high volume... cheers
Thanks. Thankyou for sharing your insights.
I bought the Deaf bounce M6C high low converter in JAN 2023, using it on RCD330 I will definitely say it's equivalent to Nakamchi DSP. Thanks to sohil sir for recommending this 6 channel converter rather than going for Nakamchi. It helped me save some bucks 😊
Thankyou sir. For sharing ur valuable feedback ❤️🔥❤️
@@sohilpruthiakaautomobileguruji you are an inspiration. Your knowledge on car Audio is mind-blowing ❤️ please keep sharing more videos. I will continue to share your videos and support you sir 🔥
Thankyou sir❤️
This is why I refer your video !! ❤
Sir i am from hyderabad i wanted an experienced and fully knowledgable person for car audio i am fedup with my car audio that too after installing pioneer zf8550bt with audison amp and audison 100watt rms components i am getting very high treble sound and distortions in mid and bass please suggest me where do i go for to get excellent sound quality please reply
9899367361
Can it play songs directly from phone via usb acting as dac or foes it only support pen drive? Great video. Keep up good work man🔥👍
Hi. I am in the USA and I cannot find the ac3 remote for the nacamichi ndsk 4085au. Do you have? And do you ship to the USA?
Hi Sohail , do u recommend dsp with pioneer headunit 8550BT ?
Kya ts b350 pro pioneer bullet tweeter milega?
Does this dsp come with bass control knob included?
What About New Arrived Nakamichi NGQ-A4251 Android Audio Power Amplifier Plug & Play unit ?
Hey Sohel,
Need some advice
I have Kia sonnet, I upgraded the music set up with Sony ES series (Components, Coaxial and Subwoofer all ES) and Sony GS4 amp for speakers and Sony GSM100 amp for subwoofer, most tracks sounds awesome. However the pain point is many old tracks sounds very bad infact it cracks, if I listen same old tracks on my home theatre it sounds perfect also these tracks sounds perfect on my iPhone. These tracks use to sound good with my cars factory speakers. I tried all combinations to set the amplifiers and this problem is not related to amp setting those are perfect.
Can someone guide
1. what has went wrong in my new setup ?
2. What is missing ?
3. Is there any configuration I am not aware ?
4. Will DSP help here ?
Please visit my store. Need to diagnose the issue.
Good honest review
does the 4 channel high output have EQ options, i mean can we change the mode and preset from this output?
Below are the things i have.
Honda city stock head unit
Rockford Fosgate T1675 components for front and rear.
Hertz 4 channel Amplifier.
Nakamichi NDSK4185AU
I have installed the component speakers to the stock head unit. I have placed an order for DSP. My questions are
1. how can i take a line IN to the DSP?
2. Can i use the Hertz 4ch Amp to power the 4 woofers and use the 4 channel high OUT from the dsp to power the 4 tweeters?
3. If i am able to power the tweeters from the HIGH OUT of the DSP, will i be able to control the EQ and every DSP setting to the tweeters?
Extra note: I have an extra 2ch AMP with me if needed please help me sort out this.
bro, do you have nakamichi 12ch DSP
Bhai mono m konsa h
How about xcelsus audio speakers they are at competitive price to JL.
Mere car me Android system hai. DSP ya non DSP kaun sa achcha rahega
Good content as always...does it have better output than blaupunkt? And please review the onkyo android
Both are good sir. But pioneer is way much better.
Bro nakamichi dsp will be good grand vitara delta stock system with steg component spk ?
bro how is steg component response? is the vocals clear? and the bass is punchy and deep?
Nakamichi NDSK 4185 Au response and price availablity????
High level converter directly to amplifier?
Hi low convertor will be installed
Hi low converter not required in Helix Brand DSP.........quality equal to MOSCONI
Much needed info 👍
9899367361
Sir i have a sony 3200 head using with android auto so should i install it ?
Suggest me a best tuner for nakamichi DSP in delhi
We have our own store. You are most welcome
I own innova crysta with 4 speakers mercury R62 with an arc audio mini Ks 125 amp and an stock headunit no subwoofer. I would really like to purchase a dsp from you according to ur recommendation
Sohil can u tune my dsp of musway online
PLEASE SHARE PRICE OF
NAKAMICHI NDST500A
Meri creta kar hai mere gadi Mein Android system Laga Hai bluepankha do speaker pianer ke Do component Pioneer Ke Lage Hain iske liye kaun sa amplifier Lagana chahie Aap Mujhe Bhi Ja sakte hain kya main aapko payment Dal deta hun
price ?
Sir Aap neelkanth walon ko maante ho achi baat hai😊
Thankyou sir.
Start using wireless microphone. Voice is not clear and crisp.
DSP is not a high low converter, even amplifiers have high level input so it dosent make a amplifier a h/l converter lol
do we need an amp to use this, can we run a subwoffer and comps with this, can u shed some light on this please
Price dsp amp
Sir pioneer SPH T20
why are you charging so high price for Nakamichi DSP, its available in under 9000/-
Now it is for 9000. One year back when it was posted it was same which is mentioned in video
@@sohilpruthiakaautomobilegurujiPl remove the price
Very nice sir
Hi level input hota he
Nakamichi DSP price
Sohil bhai time nikal ke hyderabad ku visit karo..
Sure sir
Yes please come hyd
Hindi m bol lo bhai
Super Bro :)
Any contact details