Your video was so helpful! I'm building a 2022 KX112 (same as you did) I'm going to race it in an adult Supermini class at Denmark MX near Green Bay Wi,! I just wanted to thank you for posting such a helpful video!
Nice 👍🏼 parts. About to purchase a KX112 for my son ( I’ll have fun on it as well 😆) Pro Circuit are nice but have found the FMF Fatty nickel coated do hold up better over time. I always use shorty silencers on all my 2 strokes for sound and low end power. Edit: Engine Ice 🧊 coolant works well. Run in all my bikes and rarely boils 👍🏼 I have run the prop taper chain on a few bikes. They do stretch a lot and usually have to take a link out after 2 seasons. Will price go with D.I.D in the future
My friend ,great video,i'me having the same problem getting the grip off the throttle tube,that thing is welded on,what throttle assembly did you replace the stock one with and did you have to do any mods to the new throttle,the more info you can give me the better,Thanks
Are all the hammer head shifters longer? Or is there a special part number? I looked on there web page and didnt see anything about being longer thanks!
I just bought one of these and I'm 5 ft 8. I fit it pretty good but I also ride a couple of full size gas gases. To me this bike is a little toy just to play around on. But it's a lot of fun. How much performance gain did you get from your mods? Why not get a 125 instead of a 112? Just curious.
Performance gains are noticeable over stock for sure. Way more low and mid. Same for me. It's a fun toy, and ya can't have enough of those right? I almost picked up a 125, but new are hard to find in my area. Even used are hard to come by at the moment. But I did pick up a 2023 CRF250R! Gonna be one of my best builds!
This came out looking so good!!!! I want to do this to my 112 but I can't find these parts do you have links or a list of all of the thinks you put on this bike I looked in the description but you only put brands
I dont, but I got everything from Revzilla, Rockymountainatv, or Dennis Kirk. Should be easy to visit those sites and find everything. Got the cylinder head from Langston Racing.
Question how much did all those come up to? I’m looking to buy the bike but not sure like do they have after market plastics that would be sick but I haven’t seen any
Cool stuff,
I can wait to see the results
Have fun.
Your video was so helpful! I'm building a 2022 KX112 (same as you did) I'm going to race it in an adult Supermini class at Denmark MX near Green Bay Wi,! I just wanted to thank you for posting such a helpful video!
Glad I could help!
Do you have any ride videos?
Buying one for my 12 year old grandson and me!😁
I ride a Suzuki RM85L with suspension work for my weight and ride smaller tracks. So Fun!! I haven't been beaten yet on the Prairie City track
Nice 👍🏼 parts. About to purchase a KX112 for my son ( I’ll have fun on it as well 😆) Pro Circuit are nice but have found the FMF Fatty nickel coated do hold up better over time. I always use shorty silencers on all my 2 strokes for sound and low end power.
Edit: Engine Ice 🧊 coolant works well. Run in all my bikes and rarely boils 👍🏼
I have run the prop taper chain on a few bikes. They do stretch a lot and usually have to take a link out after 2 seasons. Will price go with D.I.D in the future
Regarding suspension springs, what is your weight with boots and helmet?
My friend ,great video,i'me having the same problem getting the grip off the throttle tube,that thing is welded on,what throttle assembly did you replace the stock one with and did you have to do any mods to the new throttle,the more info you can give me the better,Thanks
Are all the hammer head shifters longer? Or is there a special part number? I looked on there web page and didnt see anything about being longer thanks!
It's their billet shift lever. I think I ordered for a KX100 at the time. I was able to go with +10mm. I don't have any other details.
I just bought one of these and I'm 5 ft 8. I fit it pretty good but I also ride a couple of full size gas gases. To me this bike is a little toy just to play around on. But it's a lot of fun. How much performance gain did you get from your mods? Why not get a 125 instead of a 112? Just curious.
Performance gains are noticeable over stock for sure. Way more low and mid.
Same for me. It's a fun toy, and ya can't have enough of those right? I almost picked up a 125, but new are hard to find in my area. Even used are hard to come by at the moment. But I did pick up a 2023 CRF250R! Gonna be one of my best builds!
@@GOATbro_Australia where u get the ignition cover ??
Was your hammerhead shifter a stock one or plus 20mm? Just curious there is a option thanks
+20mm
We’re did you order the head from
Langston Racing. Detail in the description.
please tell us all what springs you used and spring rates for your weight. try give us an update on your thoughts.
So far, .33kg Factory Connection springs in the forks. Rear shock is stock spring for now, but adjusted preload for 105mm sag.
For 170lbs.
@@GOATbro_Australia What is your height. I live in Boise County. Ride around Idaho City.
Stock rear spring for now. And .33 fork springs. 165 lbs
What vhm parts number
@@GOATbro_Australia I just ordered the boyesen clutch cover . Ignition cover . WATERcooled Kit .
Where is the video of it compete? And performance this is what I want to do
Just go to my channel and the browse all my videos. There are a few!
Thanks!!
Where you get all your parts from?
rockymountainatv.com and revzilla.com
do you have the part numbers for any of these products or for the vhm head
I dont. The part number for the VHM head is in the description of my video of the VHM head along with other details.
@@GOATbro_Australia ok thank you
Did you change your foot pegs? If so can you send the link
IMS Pegs. Ordered from Revzilla.com.
Just search for pegs to fit KX112. You might find several good options
@@GOATbro_Australia I couldn't find any, but thanks for the link.
This came out looking so good!!!! I want to do this to my 112 but I can't find these parts do you have links or a list of all of the thinks you put on this bike I looked in the description but you only put brands
I dont, but I got everything from Revzilla, Rockymountainatv, or Dennis Kirk. Should be easy to visit those sites and find everything. Got the cylinder head from Langston Racing.
@@GOATbro_Australia ok thanks
@@GOATbro_Australia are all of these parts perfect fits or are they made for 100
Question how much did all those come up to? I’m looking to buy the bike but not sure like do they have after market plastics that would be sick but I haven’t seen any
Parts all total were around $1000. Decal Works has great aftermarket plastics and graphics!
@@GOATbro_Australia great thanks keep up the great content
how much was this build?
About $1500
@@GOATbro_Australiaok thanks
You have bought vforce..