@@Baron_Rutledge just take the last shot right back by the first one without crossing the line. It is not needed to have a perfect closed line to create the model. Including a stock pile outer boundary line. When you go to COGO to run the report, it will auto close it for you.
@@sitechintermountain I know about the stockpile outer boundary closing itself I was curious about the surface as design. Do you know which advanced measurement module you have? Thanks for the help.
@@Baron_Rutledge as far as I know there is only one advanced measurements module. You don’t have to have a closed boundary to finish out a surface as design option either if you don’t have it.
Thanks so much for the helpful instructions
Are the steps the same if you do this with a total station instead of a rover?
Yes, exactly the same for all the options on screen
Great video. Is there a way for Siteworks to display the elevations of your break line points?
hit the gear on the main screen under the measure tab have option for name,code,and elevation
What if I do not have the advanced measurements module for closing out the line?
@@Baron_Rutledge just take the last shot right back by the first one without crossing the line. It is not needed to have a perfect closed line to create the model. Including a stock pile outer boundary line. When you go to COGO to run the report, it will auto close it for you.
@@sitechintermountain I know about the stockpile outer boundary closing itself I was curious about the surface as design. Do you know which advanced measurement module you have? Thanks for the help.
@@Baron_Rutledge as far as I know there is only one advanced measurements module. You don’t have to have a closed boundary to finish out a surface as design option either if you don’t have it.