ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- 🤔Interested in learning on a deeper level?🧐
Click here👉 www.asm101.com...
👀Interested in 1:1 coaching?
Click here👉www.asm101.com... Parapet coping metal is not only installed for its esthetic appearance, but it does have a function as well...As I install this parapet coping metal, I will be guiding you through it as well...If you have a question be sure to leave it in the comments.
Architectural Sheet Metal can be a lot of fun and a skill worth improving.
Definitely a solid career choice for anyone thinking to get into the trade.
Follow along or just watch, either way, we appreciate you and hope you enjoy the video.
Subscribe for more Architectural Sheet Metal content here:
www.youtube.co...
Share this video with a friend:
• How to Walk on a Metal...
Tools we use:
1.DRILL
Dewalt 20v impact - geni.us/IAh7wg (Amazon)
Dewalt 5amph Battery - geni.us/X9dnA (Amazon)
2. ORGANIZATION
Bit Holder - geni.us/yMfe (Amazon)
Dewalt Impact Ready Bits - geni.us/WDdzAW (Amazon)
3. MEASURING
Stanley 25' Measuring Tape - geni.us/KZXbmiF (Amazon)
4. MARKING
Speed Square - geni.us/OY2S (Amazon)
5. CUTTING
Midwest Red’s and Green’s Offset Aviation Snips- geni.us/ufBW (Amazon)
6. BENDING/FOLDING
Gray's Folding Tongs - geni.us/QEZ2 (Amazon)
Offset Seaming Pliers - www.steetz.com...
7. HAMMERS
Estwing 20oz Smooth Face/Straight Claw Hammer - geni.us/3yejT (Amazon)
8. HANDY MUST-HAVES
Flathead screwdriver - geni.us/epRdvBO (Amazon)
Glazier Bar - geni.us/mcyVli (Amazon)
9. KNIFE
OLFA 25mm Knife - geni.us/lV1J (Amazon)
OLFA 25mm Blades - geni.us/2H3pE (Amazon)
10. CLAMPS
Small C-clamps - geni.us/q43Eg6 (Amazon)
Large C-clamps - geni.us/LS6Cs (Amazon)
MISC.
Malco Bar Folder - geni.us/55LSF (Amazon)
Portable Band Saw - geni.us/hG3QrNb (Amazon)
Watch next: • 5 Ways to Help Reduce ...
Recommended Playlist - • 5 Ways to Help Reduce ...
Let’s connect:
Facebook - / 471494250512604
Instagram - asm101ig
LinkedIn - Alex Prothmann
Twitter - @Sheet101
#asm101 #alexprothmann #metalroof
Thank you for watching ASM 101! If you are getting value please share with a friend, like and subscribe.
As an Amazon Associate, I earn from qualifying purchases on links included in this site.
As a flat roofer of 37 years, thank you for mentioning the damn sharp pieces of metal that a lot of metal workers leave on the roof. They easily puncture EPDM, PVC and modified bitumen roofs. Now if only the HVAC guys would learn not leave said pieces and especially screws off the roof now!
Yeah it's funny they will call the roofers for a leak that the HVAC guy made but there's no proof and the roofer has to eat it
Usually on new construction once the roof is complete any trade afterwards that comes on and causes a leak we fix but we bill that trade. We clean the roof spotless of all our stuff and from there we usually have a good idea what trade is still working on the roof and can usually match their fastening or material to the trade. But that's while the job is ongoing.
How do I prevent water from constantly dripping at that S seam? Tried caulking but water always seems to wet the wall directly under each seam
Best way to avoid it is the add slope to the top and drain away from the face
why didnt you dabricate that in the shop?? cleaner and quicker
Not quicker
Could you have broke it with the taper, assuming you measured at take off. Seems like.that may have saved a little time
If I’m going in to an S lock I always pull one end
@asm101 that's nice work I like the s-joint technique have used in ac duct construction but never in coping. Mainly used splice plates and standing seam on continuous cleat applications. I enjoy your videos good to see clean work going down.
Nice! Love this way of demonstrating things! You get to reinforce the things you’ve learned! 👏👏
Yes! How long have you been posting videos?
Could you do a video on how to do a "S" lock? Very interested in that method. Looks way better than having the coping method of a flange folded up on both sides of a seam and bent over.
Yes of course...it's on the list
S lock is basically take the last 3" and fold it underneath the peice, make a 2" mark on the 3" peice and fold it forward. If you can visualize it creates a pocket with 1" sticking past the top of the coping to serve as a flange for your screws. You also want to taper your peice. If you have 7" cap you want your stock side to be around 7 1/4" this accommodates the thickness of the layer of metals so it slides in easier.
@Cam do you put any type of sealent in the little pocketed area? Or should you just have a good peel and stick layer ontop that overlaps onto the siding material, etc.
Parapet caps aren't meant to be waterproof althought they can definately help with shedding water. The flat roofing company is supposed to seal up, over, and down the face and the copings main purpose it to prevent the flat roofing material from peeling back
@Josh usually yeah you put a small line of caulking along the flange before inserting the second peice. In most cases you never want to tie your peel n stick into the metal they should each be their own defense against water
Nice job as always!
Thanks for being such a faithful viewer of our content...more to come...looking forward to pumping out some higher quality stuff
Just wondering why you wouldn’t of had the Parapet coping flashing mad with a tapered hem from the break way cleaner and safer bet
💯 but not always the case...knowing how to do stuff like this will keep you out of any kind of trouble
I’ll get at you on Facebook later.. I like your style, but I do it quite differently. Also because we are the roofers as well
Happy to have you I'm glad you're enjoying our content these videos take a lot of work and I'm glad people are watching them..... What style do you prefer?
Flanged gutter should go on before cap, so that the flashing/stripping can go up under the cap
Customer didn't want gutter but yes I agree...would be a nice detail!
You need a pouch for your scraps
Your not the first to say that! Bad habits die hard
With all your details I can’t believe you don’t have a little bucket for garbage instead of throwing on the ground thanks
Bad habits die hard 🤦
Easier to pick the garbage off the ground than drag a trash bucket around with you . Lol
Gotta keep the greenies busy somehow lol
How do I do a coping on a round wall?
There are afew ways but the most popular is in small lengths sections...depending on how tight the radius of the curve will indicatehow short you make the pieces
If the roofers were smart, they would tell the builder, hey look you need to raise the parapet wall with another 2x6 before the flat, or Just do it themselves.
Technically there will be once the build the deck...I've been in this situation a million times...doesn't bother me that I have to customize my piece
@@asm101 it drives me nuts. Don't have patience for that shit 🤣. Yell at the builder and roofer 😋
@@mpmPaulski yes sir! I'll get right on. That
A 5-1 tool like the one painters use, is great for opening that drip edge seam 👌
Yes i either use that or a flat head screwdriver
Window bar works great too, keeps your hand away some aswel
No wind clip?
railing was installed
Like top mount? Maybe we do it different in bc canada but regardless we still install wind clip.