Fantastic walkthrough - thank you - and it gave me the confidence to replace the clutch on my 2L. Pretty much exactly the same process, although some slight bolt differences and perhaps a bigger gearbox to manhandle around too. Oh, and the clutch is a pull-type so the release arm needs removing to allow the gearbox off and the thrust bearing needs popping in with the arm *after* the gearbox is back on (there are a couple of videos with further details on here covering the details but in an Elantra). Thanks again!
Wish I read this before starting my clutch, I spent a day trying to pry a siii 2008 clutch from the engine until a friend suggested that. :/ Great video still saved me £100s
Tengo un Hyundai Coupe del 2003 y el motor es igual. Me ha encantado verte trabajar, menudo curro tiene cambiar embrague y luego acordarse donde estaba cada cosa. Muy bueno😊
Man, you do make it look so easy, I’m about to do the 2003 version of this car, going to be the exact same job, about how long did this take? About 8 hours? It’s crazy you got it so fast and took the time to record it all. Great work.
I hate you making it look so easy dropping that bottom ball joint out lol 😆 my misses had a coupe for years had to change bottom ball joints didn't drop as easy as that. Great vid as always Kev
Kevin I see you changed the slave as well because it was wet but if you come across cv boots bust do you replace or advise great work lad always enjoy stay safe and warm 👍👨🏻🏭
Hello, if you are a hero to me, I see you work and it seems easy but it has a lot of value that you work alone. What are the worst cars to change clutch ?. A greeting from Spain
@@WMCS Thank You, nice video, but now when I see what work there is done, no way I will do it myself, this is only job for experts like You ! Thank You for showing us what it takes to just change the Clutch.
Love the work lad . I've changed my gearbox other day as it was faulty on a fiat punto 2007 And now the car does not go in gear. I think its the slave cylinder but not sure . Could a faulty slave cylinder prevent it to go in gears? And thanks for the fiat punto clutch video u posted.
@@WMCS yes it goes in gears when engine is switched off. But when engine is running ot doesn't go in gears. I'll try to pump it up few times to build pressure. Thanks kevin
Great video as always Kevin 💥👍 if you get any Dacia Dusters can you please film 🎥 it would be much appreciated 👍💥 I’m starting to get quite a few for servicing and going by experience I’ll have the gearbox out of one within the next few months Regards Eric
Smooth your video on astra helped me change clutch myself. Shame am not more local (Derby). Regarding clutch filements there often seems to be multiple choices for same engines for example I now have coupe 2.0)(FD02 AHJ). And there are listing for 220mm and 215mm. But both filements for same reg anybody know? Thanks Looking at valeo 826419
Fantastic walkthrough - thank you - and it gave me the confidence to replace the clutch on my 2L. Pretty much exactly the same process, although some slight bolt differences and perhaps a bigger gearbox to manhandle around too. Oh, and the clutch is a pull-type so the release arm needs removing to allow the gearbox off and the thrust bearing needs popping in with the arm *after* the gearbox is back on (there are a couple of videos with further details on here covering the details but in an Elantra). Thanks again!
That’s the one 🍻🍻🍻
Wish I read this before starting my clutch, I spent a day trying to pry a siii 2008 clutch from the engine until a friend suggested that. :/ Great video still saved me £100s
You make it look so easy. Always impressed that you have the right parts!
Thank you.
very good detail pictures excellent. gives me confidence to do my own. Hope it goes that easy lol!
Tengo un Hyundai Coupe del 2003 y el motor es igual. Me ha encantado verte trabajar, menudo curro tiene cambiar embrague y luego acordarse donde estaba cada cosa. Muy bueno😊
A new jack « Viking 3 T » : a new weapon for the clutches warrior 😀✨👍🏼
That’s it mate. Got to keep up the Arsenal.
Man, you do make it look so easy, I’m about to do the 2003 version of this car, going to be the exact same job, about how long did this take? About 8 hours? It’s crazy you got it so fast and took the time to record it all. Great work.
Holaaa, lo hiciste en el del 2003, como te fue?
I hate you making it look so easy dropping that bottom ball joint out lol 😆 my misses had a coupe for years had to change bottom ball joints didn't drop as easy as that. Great vid as always Kev
😂🍻.., a bit like a one pot dinner. One hit wonder ✔️
Imao
Great job again, Dead Clutch Slayer. I've many respect for you
🍻😁.., that’s it mate.
That was a nightmare. Worse than a Mini. Great work Kev.
Not too bad really 😁🍻🍻🍻
Very close and detail shots are good ! From S. Korea.
Thank you. A big hello to South Korea.
the gods of the clutch ?? 👌🥇🎄
😁.., always a pleasure
fan of your work, following here in Brazil💪
Thank you. Big hello to Brazil.
as always, a fascinating way of working
Thank you.
Excellent job Kevin 👍👍👍
Thanks mate.
Great video , could learn alot from you , thanks for sharing
Thanks Simon.
Excelente, parabéns pelas ferramentas novas👊👊👊👊
Ferramenta é todo
🍻🍻🙏🏽
que lujo de reparación..
🍻🎄
love the videos I see you have a few new tools
Thanks mate. That’s it. A little inventory upgrade for the next level.
Olá parabéns ,belo trabalho e bom profissionalismo 👏👏👏👏
🍻🍻🍻🙏🏽
Kevin I see you changed the slave as well because it was wet but if you come across cv boots bust do you replace or advise great work lad always enjoy stay safe and warm 👍👨🏻🏭
I only focus on what will make the clutch work after my repair. Anything else the local garage can have a bite.
Excellent as always kev new milwaukee impact there kev? Seems cleaner than normal
Yep. Two new Milwaukee. One high torque. And one mid range. Both 1/2 drive.
Hello, if you are a hero to me, I see you work and it seems easy but it has a lot of value that you work alone. What are the worst cars to change clutch ?. A greeting from Spain
Thank you. I like them all. Except some
but why clutch fluid left black? and air filter when placed back, the reed fell in motor side.
You’re too intelligent. … boss level you are 🍻🍻
@@WMCS Thank You, nice video, but now when I see what work there is done, no way I will do it myself, this is only job for experts like You ! Thank You for showing us what it takes to just change the Clutch.
멋집니다!
Ok.
What was the red stuff you put around the holes and shaft, abit of grease?
Yes. Rubber grease
@@WMCS does it have to be rubber grease
Love the work lad . I've changed my gearbox other day as it was faulty on a fiat punto 2007 And now the car does not go in gear. I think its the slave cylinder but not sure . Could a faulty slave cylinder prevent it to go in gears?
And thanks for the fiat punto clutch video u posted.
Does it go into gear with the engine switched off. Pump the pedal quickly multiple times to build up pressure in the hydraulics. Then try it.
@@WMCS yes it goes in gears when engine is switched off. But when engine is running ot doesn't go in gears. I'll try to pump it up few times to build pressure. Thanks kevin
Perfekt!........From Germany;-)
🍻🍻 thank you.
Great video
Thank you.
Great video as always Kevin 💥👍 if you get any Dacia Dusters can you please film 🎥 it would be much appreciated 👍💥 I’m starting to get quite a few for servicing and going by experience I’ll have the gearbox out of one within the next few months
Regards Eric
No probs. I can’t seem to get hold of any of them. I’ll keep a lookout
Should be similar to Renault stuff mate. Basically the same cars.
You need to be fairly flexible for this job. Is this easier on a rear wheel drive car?--great camera work.
That’s it. Flexibility 🍻🍻
Hy Kevin your sockets do not wear starting you ratchet before you put it on the bolt.
Yes sometimes. I replace sockets and all tools as they wear and brake. It’s a constant replacement.
32:26 what type of degreaser you use plz?
It’s only brake cleaner.
j est regarder dans toute les videos pas trouver toyota yaris 3 1.4 l diessel annee 2012 pas trouve peut etre bientot une !!!
Je Pense que le auris cest La meme sue la chaine
@@WMCS ok merci et bon courage
Kevin
How does it take up drive if the flywheel spins like that , when you turned it , it seemed not to be connected to the crankshaft
Turning the crank is always easy I suppose., I always have to make sure it doesn’t spin.
Think might jump couple teeth on timing belt was too free
Hello
Good job ,top ans simple .
what is tour model of your milwalkee .
Fuel. Thanks.
and its thumbs up from me buddy
Thanks Mike 🎄🍻🍻
24:15 new jack
Yes mate. New addition to the family.
hello!how many hours,ready?hello from finland🤘
Not very Long mate. About 3-4hrs
please check
tir airpresure yourcar ifeel a little low
Ok.
👏👏👏👏👏👏
🍻🍻🍻
Smooth your video on astra helped me change clutch myself. Shame am not more local (Derby). Regarding clutch filements there often seems to be multiple choices for same engines for example I now have coupe 2.0)(FD02 AHJ). And there are listing for 220mm and 215mm. But both filements for same reg anybody know? Thanks
Looking at valeo 826419
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
🍻🍻🎄🎄
👊
Thanks 🙏🏽
😁😂💃👍👍👍👍
Woop woop
Ferst ❤️🔥
Absolutely 🥇