Hey mate, that’s awesome. Now here comes the fun stuff. Firstly, just be aware the rear body mounts can be difficult to get to if you have a rear drawer set installed and you will need to access the inner rear side panels. It’s been such a long time since we did this job and tbh can’t remember but I suspect all you’d need to do is just try and compare the bolts. As for the body mount spacers themselves, I think they may be part of a diff drop kit? Or possibly just different sizes. I’m sorry but unfortunately I just can’t remember.
The kit came with everything we needed. They had brackets for the radiator and an extension for the steering column. We used the radiator brackets to relocate and didn’t use the steering column extension as we were able to coax the existing clamp to suit the 1” body lift. I’d also be considering the front and rear bumpers as the don’t raise up with the car. The front bullbar we used some thick pinchweld and the rear was acceptable with the change in height. Hope this helps.
This isn’t my person vehicle, it’s a mates I worked on. I believe he bought them online off eBay. They’re suited to the FJ cruiser, kit is 1” and comes with all accessories for the job. Just be mindful that you will need to lift the radiator, extend the steering column, the front and rear bumpers stay in place so there may be some fiddling to get them looking right.
This isn’t my person vehicle, it’s a mates I worked on. I believe he bought them online off eBay. They’re suited to the FJ cruiser, kit is 1” and comes with all accessories for the job. Just be mindful that you will need to lift the radiator, extend the steering column, the front and rear bumpers stay in place so there may be some fiddling to get them looking right.
Thank you mate. Body mounts on my 120 are flogged and this helped a lot
Me again. Just bought the kit. Bbk. Where does the narrow blocks go and where does the shorter bolt go.... just wanted to ask before I tackle the lift
Hey mate, that’s awesome. Now here comes the fun stuff.
Firstly, just be aware the rear body mounts can be difficult to get to if you have a rear drawer set installed and you will need to access the inner rear side panels.
It’s been such a long time since we did this job and tbh can’t remember but I suspect all you’d need to do is just try and compare the bolts. As for the body mount spacers themselves, I think they may be part of a diff drop kit? Or possibly just different sizes. I’m sorry but unfortunately I just can’t remember.
Diff drop is different I have the kaon one in the garage. All good cheers
What did you do to lift the radiator and what was required on working on the steering column
The kit came with everything we needed. They had brackets for the radiator and an extension for the steering column. We used the radiator brackets to relocate and didn’t use the steering column extension as we were able to coax the existing clamp to suit the 1” body lift. I’d also be considering the front and rear bumpers as the don’t raise up with the car. The front bullbar we used some thick pinchweld and the rear was acceptable with the change in height. Hope this helps.
Hey mate what body lift did you use. Also what lift are you running?
This isn’t my person vehicle, it’s a mates I worked on. I believe he bought them online off eBay. They’re suited to the FJ cruiser, kit is 1” and comes with all accessories for the job. Just be mindful that you will need to lift the radiator, extend the steering column, the front and rear bumpers stay in place so there may be some fiddling to get them looking right.
Where’s u buy them from. Looking to get some for my 2016 150
This isn’t my person vehicle, it’s a mates I worked on. I believe he bought them online off eBay. They’re suited to the FJ cruiser, kit is 1” and comes with all accessories for the job. Just be mindful that you will need to lift the radiator, extend the steering column, the front and rear bumpers stay in place so there may be some fiddling to get them looking right.
*Vertical Video in 2022? First time using a cellphone camera?* 🤦♂
Haha, nah. Just too busy trying to do the job and not wasting my time with fancy camera work. 🤷🏻♂️😂