Iconic French Wonder Lamp - Restoration
ฝัง
- เผยแพร่เมื่อ 19 พ.ค. 2024
- In this video i'm restoring an old french Wonder lamp.
My good friend TysyTube Restoration bought this Wonder lamp on a flea market in Paris. He asked me if I want to restore it and obviously I said yes. He already restored two of them himself, I link his videos and channel below. These Wonder lamps are very well known in France, they're used on railroads mostly as far as I know.
I first wanted to paint the inside of the lamp white, but as soon as I saw the amazing look of the sandblasted aluminium I decided to go with that. I just had to remove the casting marks first and then sandblast it again. I choose yellow for the lamp with black letters and black for the handle and the switch. It had a few brass parts that were deformed to keep them in place, which I had to grind away to loosen them. I made all these parts new on the lathe and mill and gave them a nice mirror polish. I deformed them again when reassembling, except for the threads. It was quite a challenge to organize the battery, as they're not produced anymore today. MC-51 rust remover did an amazing job on the very rusty steel parts, a bit of sanding and polishing and they appeared like brand new. Same goes for the plastic parts, I sanded them wet with 400 grit and polished them with car wax.
I really like how this lamp turned out, even that the colours are not original, the yellow goes very nice with the black and polished parts in my opinion. As I mentioned above, I'll keep this lamp for myself for display.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Lewis Mocker
Uwe Keim
Jonathan McGhie
Anthony Archer
William V.
Afreeflyingsoul
Micky McKay
Alan Hanson
Alex Roussos
Gregory
Joan Casanovas
John Romero
Jonathan Heckerman
Paul Mampilly
SA Graver
Vince Valenti
Zachary Grimes
Timestamps:
00:00 preview
00:33 disassembling
02:44 showing all the parts
02:59 removing the old paint with paint striper
03:40 sandblasting
04:11 restoring the aluminium case
05:14 restoring the aluminium back plate
06:03 sandblasting the inside again
06:21 polishing the brass part of the aluminium case
06:35 restoring the switch
07:01 restoring the handle
07:28 applying two component filler before painting
08:06 applying two component primer
08:18 wet sanding the primer
08:30 applying two component yellow coat (signal yellow RAL1003)
08:36 applying two component black coat (jet black RAL9005)
08:42 painting the letters black
09:00 making new brass pins on the lathe
09:48 making new brass bolts on the lathe and mill
11:15 restoring the two knurled brass knobs
12:09 rempoving rust with MC-51 on the steel parts and polish them
12:47 making two new brass pins for the handle on the lathe
13:36 restoring the shaft from the switch
14:03 showing the cleaned glass
14:07 making a new rubber gasket for the glass
14:26 restoring the front reflector
14:37 restoring the small plastic part from the front reflector
14:52 restoring the red reflector
15:09 restoring the aluminium frame from the red reflector
15:24 polishing the nickel plated sheet
15:35 showing the other polished copper parts from the switch
15:40 showing the new battery
15:46 showing all the parts before reassembling
16:03 reassembling
19:00 showing the finished lamp
19:30 final test
Time and costs of this restoration:
I was working on this project over 2,5 weeks
Wonder lamp was a presant from TysyTube :-) Thank you
$35 Battery
$20 two component primer
$20 two component yellow coat (RAL1003)
$20 two component black coat (RAL9005)
$5 rivets
$5 bulbs
My camera:
Panasonic HC-V180
TysyTube Restoration channel:
/ @tysytube
TysyTube's Wonder lamp restoration:
• Vintage Wonder Lamp Re...
• Transformation Vintage...
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
My Patreon Page:
/ mymechanics
I am so grateful that you restored this lantern 🔦It’s such a pleasure to watch 😍.
When are you buying a sand blaster?
The fact that I'm subscribed to both of your channels makes me happy...
@@manuelreyesjr.8630 hah me too. The only two restoration channels, not counting art, I follow and like the work of. I thought for a long time they belong to the same person :)
Your stickers look dope :D
WHAT IF THEY ARE THE SAME GUY?!
I noticed two things about this guy: 1) He doesn't like sharp edges and 2) He just loves to make metal shine.
3) Loves making any new ones.
He even makes the inside of items he restore shine. It doesn’t matter if anyone will ever see the guts.
Him: *S h i n y.*
Also all screw holes have to be beveled in his eyes
And have probably millions of files 😂
He isn't satisfied bringing things back to their original condition. He's such a perfectionist that he fixes factory flaws. Love it! ❤️
Many many thanks :-)
this is the best thing about this channel, this and the green filter when he's soldering something
The fine art of figuring out how to take something apart without ruining it.
Whats inside hate him
I destroyed the entire lamp..... I make a new one
Он достаточно умён для этого, но в то же время он совсем не опасается что-либо сломать, потому что... "i make new one!"
And then reassembling it better than it was from the factory
Give him a plastic thing with those hellish clasps that can't be undone and he won't sweat a single drop
DER Standard für DIY Videos, Präsentation, Schnitt, Ausführung und perfektes handwerkliches Können. Da wird selbst eine Handlampe zum Star.
Eben!
is so🤣🤣
Walked into my room, saw the notification on my TV and ran to my couch like an excited toddler on christmas
It's so satisfying when he uses old tools he's restored to restore more tools. 17:15
@Lawrence Greenwood Yeah, I love seeing that^^
56:00 ad at onset?! And yes, I am aware of TH-cam adblocker. Just prefer to support the artists by groaning through the ads. But this is ridiculous and I don't think that it is you. Tis the TH-cam a**holes!
Edit: 26:55 ad @ 5:22.
Edit: I give up!!!!! Too many ads!!!!
Same...screw mowing the lawn.
@@stanervin6108 Hey, be aware that they are now playing two ads at a time in some cases.
This guy is so talented I bet he could restore my faith in humanity.
@Homelander Done! 😁
It's not talent. I went back to school to learn exactly this trade. Before I was 30 I walked around in the world not knowing how stuff was made. In school I learned about materials, their strengths and weaknesses, how to approach working on them and learning what materials are good for what kind of stuff.
This man has a lot of miles on his meter working in this branche and that is what shows.
Talent doesn't exist. Talent is adequately shaped enthusiasm. You can have a preference for what you like but no one is born with the right knowledge and tools. It's all learning and practice.
Ya ,its already done !👍
"This humanity is broken.
I make a new one."
@@MsDrientje very well said
Ok, I swear this is the last one I watch...
2 hs later: Ok, I swear this is the last one I watch...
What he said. Lol
😄 I have the same
Me too😂
Me too!😁
Аналогично.... И так пошла уже вторая неделя.
Mm: "due to grinding, I can't use these."
Me: omg is he going to say it?!!
Mm: "I make new ones."
Me: *YEAHHHH!*
💯
بحبك
Hell yeah 😂😂😂
I know everyone says it. But let me say it again.
Best restoration channel on TH-cam
Thats right.
Damn Straight!
This is the only channel I’ve been able to find that actually does a perfect job. Every other channel I’ve come across that works with metal and other materials often leave imperfections in the material and leaves the job feeling unfinished. Great job.
Many thanks :-)
I'm so glad i discovered you....your work calm me down, it's almost like an addiction to watch your passion and patience.
I have no idea how or why I got here. All I know is, I'm staying.
Piers Cleveland-Copeman me too!
_"Shtay awhile, and listen."_
- Deckard Cain (Diablo)
Same here
Welcome
This is entirely a mood with this channel specifically
You are the BEST in the restoration community... srsly... I wasn`t really awake yet and was already watching...
my mechanic's restoration skill lvl/rank: Global Elite :)
I love how the casting ridges are the first to GO on your projects! 👍
Thanks 👍
Aluminum with a brushed finish ir freshly media blasted finish is so beautiful.
I can't believe how entertaining these videos are. Only explanation is that I'm watching an artist at work!
The best restoring channel is back! Nice work as always.
Seriously, it's mesmerizing each time!
My thoughts echo everyone else's here. In addition, I appreciate the real-time snippets of action, not the fast forward that all the others do. You show exactly how you are restoring the piece without having to see all the actions. Thank you for that. And yes, a huge grin appears on my face when you build up to the statement, "I make a new one". My father handy like you and watching you brings him back to me.
Me: These videos are so soothing. I love watching them to relax to and sleep
Video, while sanding: *screeech* *hwonk* *thwom*
Me: soooo soothing
This restoration is likely of much higher quality than the product was even brand new
Thank you very much, i'm glad you like it :-)
ya modifico el original sacandole rebarbas e imperfecciones ya no es una restauracion . modifico al original no lo restauro .
@@gabrielreguera Pesao, que eres un pesao.
Sam C enti quiti 19x
Sure !
I love your restorations and also TysyTube. 2 great guys working together is fantastic :)
Best bromance on the internet!
@@lobocroatia still a better love story than twilight
And far more useful 😁😊
this is such a healthy community. I really like this
Yes! Refreshing, isn't it?
I love this little friendship between two amazing restoration channels.
The way these things look when restored to "as new" gives an insight as to how they might have lasted so long. They're such lovely artefacts that you would want to keep them as clean as possible for as long as possible.
Well back then these were seen as common and not as we all see them today, as these things we want to protect and save
i agree. however. if i were to have done it im not sure i could have resisted upgrading the light and battery lol.
You don't need patreon. Everything you touch become gold.
Your smooth edges and rounded out corners make my life seem manageable.
Thanks for watching, much appreciated
I still do not believe that there are still such experts in this industry. After each movie, I pick my jaw off the floor. You are amazing.
Thank you very much, I really do appreciate it :-)
There is something that is amazing about watching a master at work. You are one of those masters. THANK YOU for recording your work to share with us.
With that kind of attention to detail, it is *better* than new.
You sir, are a legend!
Фантастика, какая трудоёмкая работа, результат потрясающий, "руки золотые".
I love the restoration community it's so relaxing and everyone's so friendly doesn't have any drama unlike some of the other communities I can name
Perhaps because people here seems to be positively oriented; building, repairing and/or restoring (even customizing) is far more constructive than, i.e., debating politics with ignorants and/or fanatics...
"I bought a new battery"- finally something this guy couldn't make a new one of.
ALLFAHQDUP Just because he had no time enough.
What kind of a battery is that, anyhow?
@@Madness832 by the size of it and the time period for when this product was meant to be used, i'm thinking it's lead acid.
@@carlos2004 Nah the battery says 'Alkaline' right on top so its not a lead acid.
I have watched many of his restorations, believe me he can make a new battery......(given time and materials).
We need the “I make a new one” line of t-shirts. Immediately.
I would definitely buy one.
When it got dirty would you throw it in the washer, in the solvent tank or sand blast it? Or, make a new one?
It's comming soon
@@Colorado_Native Polish it. Its still usable. When I tear it I'll need my mechanics to make me a new one
Where are the T-shirts?
Dude I’m not gonna lie your videos are great to get me to fall asleep. I’m a severe insomniac and it’s really hard to fall asleep sometimes. Since you don’t talk, I just kinda go in a dreamy state while watching your videos and I sleep. So thanks you, you’ve let me sleep for good. 😁
Same
Мне кажется что это фонарик получил не только новую жизнь, а стал лучше чем был новым. Прекрасная реставрация 👏👏👏
I admire your attention to detail, also your paint finish quality is far superior to most all other restorers I see (in any field, be it tools or car models). I'm sure it never looked this good when new. Keep up the good work Sir...
He's the exact opposite of me. As far as I'm concern if something works I couldn't care less what it looks like and a quick lick of whatever paint I have lying around is good enough if it becomes really necessary.
Very relaxing to watch somebody do something I don't have any inclination to do myself. And do it so well.
@@xxxggthyf with you on this! I often wonder what life would be like if every appliance, tool, machine and vehicle was made down to the tightest tolerances, carefully filed, attention paid to the smallest possible details and I always end up thinking that everything would be beautiful and work perfectly, but nobody would have anything because it’d all be so damn expensive 😂 this channel (and clickspring) are great at getting me to spend more time filing, though
If it’s not better than the genuine product then it’s not a “my mechanics restoration job”.
Absolutelly true. Burda başka Türkleri görmek çok güzel :D
Sorry for ruining your 222 likes! :D
واذاسَئلكَ عبادي اني فاني قريب اجيب دعوتداعي ذادءاني فليست جيبوني ولي يومنوبه لعلهم يرشدو
AHMED Sedo what
I have anxiety issues but when I watch other peoples videos that are sped up, it makes me even more anxious. Your videos make me feel so relaxed! You show them in real time & take your time to decide what you want to do. Which allows us to do the same. I love the attention to detail. Your restorations are better than new when you are finished. Thank you very much. Please don't stop posting your work! I look forward to seeing your next video. Be safe
Brother your really HONESTLY great doing God bless you 🤗👍😎😀
He needs a museum with all of these restored pieces and a picture of what they looked like before!
Doctor: "we have to amputate your leg."
.
My mechanics: "Ok I make new one."
akc I’m dead💀
lmfao
ahahah!
Prosthetic leg in a nutshell
Doctor 3 years later: "We have to amputate your arm."
My Mechanics: "I make new one"
Doctor: "Won't that be hard?"
My Mechanics: "I make robot arm to make new one"...
Doctor: "Oh..."
I don’t know how you do it but you are one hell of a Restoration person I have ever seen 😂😂😂😂😂😂😂👍👍👍👍👍👍👍👍👍😂 great job on that yellow lamp .
"These need to be replaced... I'll just make new ones"
😶
The engineering skill on display here is absolutely epic .. hats off to you sir!
I’ve said it before and I’ll say it again:
Best restoration channel on TH-cam!
Totally AGREE... He's the best...
For months I follow both (TysyTube and My Mechanics). Both are very good but someone has to say it. My Mechanics has a level of detail and unrivaled perfection. I repeat both are very good but seeing a finished work of My Mechanics always gives a feeling that could not be done better, however when watching a video of TysyTube leaves the feeling that they could polish a little more the small details.
Congratulations to both and I am a big follower of both, thanks for such good videos.
This channel makes me appreciate so many things, not least of which that there was a time when almost everything was made of wood, metal and glass.
Thanks for watching, much appreciated
And he wrote "aluminium" and not aluminum. I love this guy ♥️
You know why you are the best? No timelapse, and you ”make new ones”
The finished products should be put in museums! Nice work.
I really like watching new parts take shape.
Am I the only one that laughed at that transition to him raking the whole casing across the sandpaper?
The fact that it made a noise like an indignant donkey caused me to spit soda on my lap
I have to say, you are the most meticulous of all the restorers I've watched... Great job!!!
The attention to detail and the way you shoot the video- no talking just the sound of the parts is intoxicating to watch.... surgical precision!
By far, one of the finest you tube channels currently imho. Thank you for sharing.
There is nothing more soothing and satisfying than turning brass. Short chips and the chirp is perfect.
Restoration channels on TH-cam = many
Channels with attention to detail = 1
hand tool rescue is better.
@@ulcan8027 not.even.close.
mymechanics: due to grinding i can’t use these
Me: Do it! Do it!
mymechanics: *I make new ones*
Me: YES!!
mymechanics: i make new ones #2
i was going to make this exact comment until i saw this omg
LOL exactly! My favorite part of his videos is when he says "I make new ones" 2nd fav has to be when he polishes stuff.
@@dan725
- my mechanics: I will polish them...
- me: *-* shinyyyy...
I want an "I make new one" shirt
Wow my friend, every time I watch your videos, I'm more & more impressed by the beautiful work you do! Your attention to detail is amazing, as are the wonderful restorations that you complete! You bring life back to all these wonderful old items!! Thank you for sharing what you do with us - it's much appreciated!! Greetings from South Africa
I've never seen anyone else make quality repair videos as much as this guy
Component:
My Mechanics: Okay I make new one
CAN I BYE NEW LAMP? IF YOU MAKE THIS....
Another amazing restoration video. Keep up the good work
Я здесь одна русская бабушка? Я залипла и подписалась. Люблю старинные вещи. Удивляюсь, как при менее механизированном труде люди делали такие вещи. Спасибо, что даёте вторую жизнь им.
One of your most satisfying recreations. How you paint in the lettering with such accuracy is beyond me.
This will BE good
I was right. It really was good
There's something about how My Mechanics restores things that makes them better than other youtubers who do the same thing.
Whenever you “make new ones”, I constantly forget that you show a top down view, not a sideways view, and it messes me up when the parts “fall sideways”
Logan Easley omg me too. Sometimes I’m like “wtf am I looking at???”
My wife asked me if it was a magnet lol.
wtf ?? its a top down view ? My brain is messed up
MaxLinker44 THATS HOW I FEEL WHEN I SEE IT
No, they fall sideways. The original gravity didn't for these shots, so he _"Make New One."_
You no doubt have restored a historical treasure that is prized by someone enough to have it restored by you. Master craftsman, restorer and fabricator. You don't need to speak, Your hands say all that's needed!
I'm impressed by your work and watching you doing it
This might be my favorite restoration video I've ever seen, and I've seen MANY.
This video was incredibly satisfying. I especially love the little thumb-scrapes on the imperfections of the aluminum cast and the subsequent removal of them!
This is a world-class video. Really enjoyed it!
Was well worth the (too long) wait. Absolutely perfect as usual! Thank you for sharing your great work with us. And... thank you Tysy!
YOU DON'T NEED TO TALK..YOUR WORK SPEAKS FOR YOU...BRILLIANT JOB..................
I love how these turn out to be better than new. Instead of a mass produced lamp, you end up with a hand crafted mass produced lamp. 10/10, awesome finish.
Who else want to see this man make an identical copy of something. Like a previous restoration(the whole thing) from scratch?
I'm a year late to reply but he did at one point make a copy of a dead blow hammer.
You did what they should have done at the factory. Nice job.
Yet another 11 out of 10. Great viewing therapy to clear your head of what may be ailing you.
Always wonderful to watch. Thank you.
I am studying for finals right now but this video sparked my interest. You are very talented and skilled. Great job on this lamp.
Cheers man.
Hitting the like before watching! Who else?
Makes me want to go back in time as a railway lineman, finding my way along the tracks with this old lamp. Wonderful.
Such great work, please take more time showing off. Like the handle on top moving before and after, and the red light. People love admiring your satisfaction with your amazing hard meticulous work and restoration! I love your videos. They surprisingly help me fall asleep too, and when I wake up, I pick up were I left off! Had no idea watching your videos would be so relaxing and satisfying to see antiques being given new life! Thank you!
"Wait! Even the springs are polished?"
"Yes. It's not a perfect restauration when every naked metal doesn't shine."
Wish I was 18 years old again. I would fly to Switzerland 🇨🇭, find you and learn the Swiss language and plead to apprentice with you. Beautiful project! 👍
My Mechanics-the only person I know who can create a work of art out of a hand made screw. ❤
Bravo ! Magnifique travail !
I like how you're friends with Tysy. I stumbled upon his channel first so he got me interested in these kinda things. You guys have different ways of approach but you're both great at what you do. Looking forward to watching more videos from you!
I couldn't agree more with you, well said :-)
That's why I have Victorinox Spirit 2 multitool instead of Leatherman or whatever. In Switzerland people pay attention for the details, it really matters.
Greetings from Russia!
Weird flex bro.
First time I saw a Swiss army knife put to actual use. Congratulations sir!
congratulations for the restoration and for the use of the lathe!
Thank you very much!
вот залипаю на такие видео... а главное как он держит в руках каждую деталь, будто раритет
А че внутри пустая ?
My fav TH-camr is here with a new Restoration! Yay!
Watching you is like a therapy for old codgers like me, reminiscing the youth and gone by days.
This channel is the best and there is no second. I wish he uploads videos faster and works on bigger projects.
I would have called "good enough" on so many parts that are inside and won't be seen. Props for being that diligent: truly an eye pleaser.
7:00 am and the first thing I do when I pick up my smartphone is watch the My Mechanics' video....
Love it!
Thank you so much for your support :-)
@@mymechanics 😊
*_It worth of watching in every episode_* .... Thank you very much ...👍👍👍👍👍
As I watch more videos, I truly enjoy them! Much respect to you sir! Restoring its not an easy job and you make look easy! Much respect!
my mechanics: Now we need to polish this part.
me: yes Yes YES
Need a whole channel just for polishing.
I FIGURED IT OUT! You satisfy my OCD.
_In Soviet Russia, obsess compulse _*_you."_*
Wow these screws with the lug are so impressive!!!
This is Artwork that can be admired.
Glad you think so :-)
Absolute perfection and a pleasure to watch. I was hoping to see the red bit lit up too, but still 10/10!
Pretty sure that reflector is simply to catch light from other sources (like the "zot-dots" on the highway that will shine red in your face when you're driving down the wrong side of the road (!) )