Wow super nice. I see a ton of builders that just tell you about the components but a break down of all parts as well as the best way to configure them to work for you… only here! 💯
Cool beans 😎 I look forward to seeing you take on the Crack of doom and the lot. I'm also very interested in seeing how it performs on the wall to see if it goes all the way to the top
I use 45w oil in my dravs. Helps keep the shocks from unloading on climbs. Also using soft spring all around. With medium springs my tgh would just unload and be fully extended. Not with 45w and soft springs.
Builds coming a long nicely. Can't wait to see it in action. Think you're gonna love the chassis in action, I know I'm more than impressed with my Dirty South build
Joe you should take a look at the link geometry, the front axle rolls pretty bad an the rear ist changing wheelbase, play around with all that holes on the frame. also some high clearance links in the back would Help a ton. with the straight ones, you give away a lot of performance.
That build is very similar to my build. I used a 3gear transmission in mine. Getting the gearing right has been a small nightmare for me. So hopefully watching tour build here it will give me some insight.
Love the build. I'm in the middle of my portal, class 3, ultra light build. Looking for a trans as we speak. Hope to see this in action, that frame section thats hitting your axle could be cut right close to the shock mount plates and then bolted onto the shock mounts to lift those rails up. gonna be fun to see if I can finish mine before you. Lol Hope you're having a ton of fun, please, be well and thanks for all the time.
If you didn't order the internal spacer with the shocks stick a 2-3mm spacer inside the shocks n it holds the piston under the oil n pulls the ride height down a few mm
Awsome rig Joe gonna be a sweet driver smooth and sexy I'm liking the creep body gonna use one for my Toyzuki V2.5 Happy Trails Buddy you are great help to us noobs
Joe (& anyone watching): I had an scx 6x6 a couple of years ago. Loved it, but was offered enough to buy n build 2 more. So i sold it (BEFORE looking to see if they were available.), & then found out a week later, they r no more 😭. Does ANYONE make the 6x6 chassis rails, & the center thru axle? (I can find everything else!) Thanks in advance! 👍
- IF... there is a "WILL"... there is a way !!! 😉 - ya know... I'm not sure exactly, but (IF) you know "HOW" TO HUNT, then ya might find "WHAT" you are lookin' for !!!? 😁 RC SWAP MEETS, (contact someone like EXOCAGED RC, (Right Here), and HE MIGHT BE ABLE TO HELP !! HE LOVES 6X6's AND... HAS EXPERIENCE WITH A FEW OF HIS OWN !!!! 👌😉. 💪🇺🇸
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 พฤศจิกายน 2567](http://i.ytimg.com/vi/wPd7VFfWHIA/mqdefault.jpg)
Wow super nice. I see a ton of builders that just tell you about the components but a break down of all parts as well as the best way to configure them to work for you… only here! 💯
Awesome vid Rcfam 👊🏾😎 Thanks for sharing
- Well, EXO... IT LOOKS AS IF YOU'VE
OUT-DONE YOURSELF, AGAIN !!!! 😁👍
- NOW "THIS" IS A BUILD I CAN.....
..."GET INTO" !!! 😯 - HELL YA !!!! 💪🇺🇸
The drav tec shocks if built right will be one of the smoothest you'll have. I love mine they are amazing
I use dravtech shocks and absolutely love them
Another work of art nice 👍
Looks awesome a dig trans would make it turn on a dime
Cool beans 😎 I look forward to seeing you take on the Crack of doom and the lot. I'm also very interested in seeing how it performs on the wall to see if it goes all the way to the top
Its coming out awesome!! Loving it.....
The dravtecs are awesome. I have them in blue with offset caps on my gspeed build. Cant wait to see how it does 👍
Thanks that answered my question last night about the axles. Thinking about Capra axles for my 10.3 Gladiator
I use 45w oil in my dravs. Helps keep the shocks from unloading on climbs. Also using soft spring all around. With medium springs my tgh would just unload and be fully extended. Not with 45w and soft springs.
That is gonna be epic when its finished. I cannot wait! 👍😁
Builds coming a long nicely. Can't wait to see it in action. Think you're gonna love the chassis in action, I know I'm more than impressed with my Dirty South build
Joe you should take a look at the link geometry, the front axle rolls pretty bad an the rear ist changing wheelbase, play around with all that holes on the frame. also some high clearance links in the back would Help a ton. with the straight ones, you give away a lot of performance.
mount every thing on the servo make a mount so it can be axle weigh and not sprung weigh looking good joe
I like those shocks, might get a set
That build is very similar to my build. I used a 3gear transmission in mine. Getting the gearing right has been a small nightmare for me. So hopefully watching tour build here it will give me some insight.
Love the build.
I'm in the middle of my portal, class 3, ultra light build. Looking for a trans as we speak.
Hope to see this in action, that frame section thats hitting your axle could be cut right close to the shock mount plates and then bolted onto the shock mounts to lift those rails up. gonna be fun to see if I can finish mine before you. Lol
Hope you're having a ton of fun, please, be well and thanks for all the time.
Looking good 👍
BUILD BUILD BUILT!👍
I remember when I saw this video I thought all the skids came with the chassis kit.
Hah, nope; TH-camr stuff, you get to pick one.
If you didn't order the internal spacer with the shocks stick a 2-3mm spacer inside the shocks n it holds the piston under the oil n pulls the ride height down a few mm
Awsome rig Joe gonna be a sweet driver smooth and sexy I'm liking the creep body gonna use one for my Toyzuki V2.5 Happy Trails Buddy you are great help to us noobs
👀 good Joe 💯👍✌
You should check out the RESCONCEPTS Servo on axle battery tray for this build .
Joe (& anyone watching):
I had an scx 6x6 a couple of years ago. Loved it, but was offered enough to buy n build 2 more. So i sold it (BEFORE looking to see if they were available.), & then found out a week later, they r no more 😭. Does ANYONE make the 6x6 chassis rails, & the center thru axle? (I can find everything else!)
Thanks in advance! 👍
- IF... there is a "WILL"... there is a way !!!
😉 - ya know... I'm not sure exactly, but (IF) you know "HOW" TO HUNT, then ya might find "WHAT" you are lookin' for !!!?
😁 RC SWAP MEETS, (contact someone like EXOCAGED RC, (Right Here), and HE MIGHT BE ABLE TO HELP !! HE LOVES 6X6's AND... HAS EXPERIENCE WITH A FEW OF HIS OWN !!!! 👌😉. 💪🇺🇸
1 today 🤪🛫🛫🛫
Was this after the stream? Also those housings look fresh
I would love to know where you're getting your Crawlmaster mini's from! :'(
I need one badly and cannot seem to source one.
Who's gonna be the first to build the new Bat Mobil
Hey buddy! What kind/brand is that transmission? Thanks
Oh my👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾
You know some 80 mil shocks would get you pretty low wouldn't you say
Did I miss the video where you said what link kit you used?
Any chance you got a answer to your question?
Wait what 10,000 milliamp 4S battery? Is this a crawler or a top speed car LOL