It's always nice to try something new that way you will know what works and what doesn't work out. It is part of learning about the art. Keep up the good work.👍
👏👏👏👏. Good working arts . I am thinking no body do't this working before . It's very beautiful design and the colors green with yellow it's arrived beautiful . Good luck with the best wishes
You should have squeezed the sponges inside the resin to push out the air so that the resin would absorb much deeper inside. Or use a vacuum chamber. There’s no way the resin would do so on its own either all those trapped air pockets inside.
Great idea.I see some sponges didnt soaked with resin enought. Next time put some resin on the botom leave a bit of gap on every side of model add layer of sponges press them in that they soak in the resin,pour some more add another layer to soak and so on.Then pour some more resin on the top.
I think it looks good. The places that ppl don't like you can take resin mix som up put some of the scrap in it you turned off. Mix it in resin then the places you dont like brush it in when it dries and it
A valiant effort. I understand the caption. Project should not be done with dish sponge and epoxy resin. With chunks missing. Wonder what the effect of hollowing it out would look. Maybe put project back into some resin and sand it down.
Instead of cutting the last 5 in half you could have saved some time by turning them to go across the mold, will 20 of them are going along the length of the mold, you can take the last 5 and turn 90 degrees so they are going across the mold.
I actually like the colors, from every experiment a lesson can be learned. Layers of color in that sequence can make a beautiful piece from unique materials. 😊
The sponges didn't get fully saturated with the epoxy and had air bubbles still trapped inside of it should have depressurized it to draw the air out of it or used a longer setting epoxy and squished each one in the epoxy so it draws it in to it !
Awesome,, like this
It's always nice to try something new that way you will know what works and what doesn't work out. It is part of learning about the art.
Keep up the good work.👍
🎉🎉
Nice! 👍
👏👏👏👏. Good working arts . I am thinking no body do't this working before . It's very beautiful design and the colors green with yellow it's arrived beautiful . Good luck with the best wishes
Thank you for trying this so I don’t need to. 😂 Keep the videos coming!
Perfect 👌
C'est avec les erreurs que l'on apprend 😉 continue 👍
It’s a cool idea. Try again.
Did you use a vacuum chamber with this project? It would be perhaps the only way to ensure saturation
Still very cool!!
That is unbelievable and pretty neat
Vacuum chamber would greatly help filling the entire sponge but the idea is great
How did you ever come up with this idea? I applaud your efforts. Bet no one else has one.
Thank you for daring to experiment! The result did have a certain broken beauty, though I understand you throwing it aside.
This is amazing man. You can turn everything.
Плохо пропиталось, а так интересно смотрится. 👍
You should have squeezed the sponges inside the resin to push out the air so that the resin would absorb much deeper inside. Or use a vacuum chamber. There’s no way the resin would do so on its own either all those trapped air pockets inside.
Great idea.I see some sponges didnt soaked with resin enought.
Next time put some resin on the botom leave a bit of gap on every side of model add layer of sponges press them in that they soak in the resin,pour some more add another layer to soak and so on.Then pour some more resin on the top.
Пропитку поэтапно,под вакуумом нужно было делать 😊
I think it looks good. The places that ppl don't like you can take resin mix som up put some of the scrap in it you turned off. Mix it in resin then the places you dont like brush it in when it dries and it
A valiant effort. I understand the caption. Project should not be done with dish sponge and epoxy resin. With chunks missing. Wonder what the effect of hollowing it out would look. Maybe put project back into some resin and sand it down.
Remarkable Brilliant
NINGUNA UTILIDAD, LÁSTIMA DE PRODUCTO DESTRUIDO!
😊😊
Interesting
Ungewöhnlich 👍😀💖
Quedó fiero...
Instead of cutting the last 5 in half you could have saved some time by turning them to go across the mold, will 20 of them are going along the length of the mold, you can take the last 5 and turn 90 degrees so they are going across the mold.
Это в вакууме надо делать!
It's pretty. To bad for all the problems but that's how we learn.
Very interesting
Not a bubble in sight!😂
Есть в этом некоторый эффект замороженности. Возможно надо было заливаиь смолу послойно, чтобы она лучше пропитала губки.
I actually like the colors, from every experiment a lesson can be learned. Layers of color in that sequence can make a beautiful piece from unique materials. 😊
🇧🇷😊🇧🇷😊🇧🇷
Every day is a school day!
The sponges didn't get fully saturated with the epoxy and had air bubbles still trapped inside of it should have depressurized it to draw the air out of it or used a longer setting epoxy and squished each one in the epoxy so it draws it in to it !
Don't quit your day job !!!!!!!!!!!!!!!!
Oh how cool
Você deveria ter posto em uma câmera de vácuo
It is totally different and it could be used for st.patricks day otherwise it’s neat
Que idéia magnífica!!
flower pot may flower nahi❤
Pas mal de défauts, dommage.
Si on me disait qu'ont pouvait faire ça avec des éponges ?😮
Он же видел, что залил не полностью. Что эпоксида мало.
Я думала ваза для цветов будет 😢
Красиво но не понятно что
Tous ce bordel, pour sa !!!!!!!!!😂
That's what you get for being stingy on the resin
tyle pracy a efekt nieciekawy
deveria ser resinado por camadas para que a esponja absorve-se toda a resina...
Terrível.
Deveria ter feito com meuzovo.
Too many air pockets
Już wiem dlaczego nie nagrywam na yt...
Sorry,nbut it looks rubbish 😢😢😢😊
I agree but it’s still way cool.
Чушь, это сидеть на Ютубе и писать комментарии, а когда человек делает что-то своими руками, это прекрасно😊
Como chama esta cola
Muito trabalho, muito tempo perdido e muito gasto financeiro por nada, me desculpe ficou uma porcaria
별로다
🤮🤢Sorry 😂
Hay q gastar plata para hacer esa boludez y desperdicio de materia prima 😂
Sorvaa, sorvaa, sorvaa vaan,
huomenna on sulla kapula...
BOF !!!!!!
This work is a failure and should not be shown on TH-cam because the plastic material did not reach the sponges sufficiently.
Pues no veas el video