Of the dozen or so videos of florescent to LED conversion that I saw, you’re the first who made the “hot/live” on side, and the neutral on the other side rule absolutely clear. Thanks!
Frank, thank you for this video! A lot of the videos I watched and websites I looked at were making this so confusing. Well my head isn't going to explode anymore after watching this video. Great job!
FRANK!!! Thank you!!! I went through 10 different videos and none were clear. Your's was top notch, perfectly clear and to the point awesome. Just changed my first one in less than 10 minutes. Only have 31 more to go!
Thanks Frank!! My garage has 21 of these 4 bulb / 2 ballast fixtures. All my ballasts have gone bad an I was looking at close to $2000 to replace them. Now I’m looking at less than $500.
I have a commercial building with over 75 fixtures that I have to change over. I have watched every change over video and this is the BEST two ballast video on TH-cam. Electricians are charging $300. per light in my area, which is totally unaffordable and I will be doing it myself. My neighbor just paid $4,700 for a single store to change over...that's nuts! Thank you for the perfect video, I started yesterday. Cost per fixture, less that $10. in materials including new wire strippers.
I met an electrician at the Flora-Bama who told me how by-pass the ballast in my florescent light fixture rather than replace it. He told me to find a video to learn how to fix it. Thanks random guy ar the bar and thanks Frank for your great instructions. Now my laundry room has light!
Great video. I followed you video step-by-step, got my LEDs installed and everything is working perfectly. Thank you for sharing this information with us.
First - Lockout/Tagout the breaker panel, and/or black tape across the light switch in off position. I got blasted off a 14 foot ladder by 220v when a security guard turned the power back on while I was wiring in a ballast. I also use a black permanent marker to write "LINE" inside fixture by tombstones on one end (closest to line source), and "NEUTRAL" on the opposite end by other tombstones. Also use electricians tape on my wire nuts to make sure they don't vibrate lose with time. My electricians tape is primarily Black, White and Green as needed for line, neutral and ground. One last thing I do for wiring is to neatly coil it up and use a wire tie(s) to hold them bunched so you don't pinch them when reinstalling cover. I have been using these methods since 1974 when I was starting out as a electrician's laborer. Great video Frank! As others said, straight forward and to the point. 5 star dude!
Small world. That sounds like a bad day, Jim! I just rewired my garage lights today to bypass the ballasts. I had type A LED bulbs in there and then the ballasts went bad so I just decided to rewire the fixtures and use type B. I also use electrical tape on my wire nuts so I can sleep better.
Frank, your video tutorial is excellent and right to the point. Better than many of the confusing TH-cam tutorials being posted on this subject. Might I suggest though that it's always a good idea to temporarily cap the hot and neutral wires after disconnecting the tombstone wires, just in case someone inadvertently turns on the light switch. Also, viewers should know that this conversion will not work with Type A Ballast Bypass Single-End Powered LED replacement bulbs which require non-shunted tombstones to be specially wired. Thanks for posting!
Hey papi, I bought a led light fixture and when I opened it I thought it was a joke. There is two 18” led strips secured to the inside of the housing. I supplied 120 volts to it. Wow definitely worth the money. The old fixture had a bad ballast. The new led fixture was around the same price as a new ballast.
Excellent video! Very easy to follow, and to the point. I'm going to mark each end of the fixture "L" and "N" for those replacing these bulbs in the future.
Easy to follow video. Tks! Just to ask, I notice swapping the bulbs out works fine (*seemingly). What does bypassing the ballast and direct-wiring to the LED 120 actually do?
My two ballast 4 bulb fixture is different. The left end and right end wire colors to the tombstone's are diagonal from each other. Red/blue X and yellow X opposite from each end. So it's not always all one side neutral and one side hot but the double end type B bulbs don't matter so I see you are correct.
Nice work, Frank. Super clear instructions and good work to the videographer too. What if I wanted dimmable LED bulbs? Do they come dimmable and can you recommend a compatible dimmer?
Great Video Frank! So a little help though, I got mine all wired up but was struggling getting the wire nuts on and a good connection in my 4 bulb fixtures. I had to use big red ones to even get the 6 wires plus the power lead on and after getting it working, now 2 hours later it's not... and I suspect those connections. You said something about "brown" wire nuts, can you elaborate please. I figure I'm gonna have to get back on the ladder and re-strip the old ballast wires longer and I feel I need better, maybe even longer wire nuts.
Found your video the easiest to understand, but have a question. Will this method work for direct wire led bulbs? We have the exact same fixture but just bought the "plain" led t8 bulbs instead of bulb with the switch or the one marked L and N2.
@vickiestrong1029 possible those could work. Not sure if the wiring is different on those would have to look at the instructions. But definitely the ones labeled L and N are easy to install
@@fbaltierrez thank you so much for your quick response. I continued searching and found on the double ended bulbs like we have, you just take all 6 wires (2 blue 2 red 2 yellow) from one end of fixture and connect to your load line. Take the other 6 wires on other side of fixture and connect all to incoming neutral wire. Also found where I can buy the retro fit stickers to go in fixture once the conversion has been done.
I didn't see anything that marked which side of the fixture had been wired as line/hot with the other identified as neutral. Seems like this would be good for others replacing tubes later.
Great video, looks easy enough.. 😂 so if I wire the same way and decide I need more light can I pop in 2 more LED lights? So one fixture would have 4 led strips? To save money for my office going to do two LED strips but some rooms might need more light then others.
On the video you did put power and neutral at different sides, but the instructions for the lights on your Amazon link says the power and neutral goes on the same side, in a non-shunted lamp holder. What is the correct way? Are the lamps on the link the verry same you was installing? It can be either way? Thanks.
I used the bulbs that have the line on one side and the neutral on the other. I keep using these because they are pretty starivhtforward and easy to install. Hope that helps
Thanks Frank. This is very clear and helpful. Now your instructions are 2-years old and I'm not sure if just replacing the old lights with LED ones was an option back them, I may be looking to follow your method BECAUSE I simply replaced the old fluorescent lights with new "plug and play" LED ones. However, the issue I'm having is that now I have an insufferable buzzing coming out of the fixtures and my question is, is that normal, and if not, is there a way I can correct this? some of the answers when searching for a solution speak to a dimmer as the cause, but I don't have a dimmer, just a simple 3 switch panel for 3 lights in the room. I'd appreciate any input. Thanks in advance.
I haven't had any buzzing, maybe the light bulbs would come to mind first Because if you override the ballast there should be no buzzing. So check the bulbs. Hopefully that helps
Man you made that look so easy. I replaced two ballast about 3 years ago and I just had another one go bad. I'm done I'm going to replace all the bulbs with LED counterparts. Thank you my friend that's a snap and I'm going to get right on it within the next week or so
Thx for the video. What LED bulbs are you using. At “the red store” they have conversion , type b , universal? What bulbs work for this type of ballast elimination? Thx in advance
Hi, if I have multiple light fixtures on the same switch, Can I just convert one of the light fixture from fluorescent to LED light bulbs? Or do I have to convert all of them?
@@fbaltierrez Yes, But If I convert 3 of them this week and the other 3 next week. Will all 6 work or only the 3 converted once will work until I convert all of them?
To go from fluorescent to LED, this work has to be done? I was told the new LED bulbs would work just installing them, but my light fixture isn't working.
Is the starting time for the LED replacements for fluorescent tubes faster? When turning on fluorescent tube lights, it takes several seconds for the lights to turn on. Maybe you should also label which side is hot and which side is neutral, so the next person that changes the LED tubes will know how to install the replacement LED bulbs.
Great easy to follow video! But I am a little bit confused. The link to amazon for the bulbs say they are single ended power and require non-shunted tombstones. I wasn’t sure if maybe the bulbs are different now or if they will work ok the way you demonstrated. Again, thanks for the video.
Hi Frank, I’ve already replaced my Mom’s fixture with leds based on your video (thank you for explaining it so well) but I forgot to check to make sure the line and neutral label on the bulbs were on the correct side. The lights work perfectly however and I am just wandering if I should go back and double check the sides? What exactly happens if you have the bulb turned around incorrectly? Will it damage them over time? Thanks again!
IF you put the power side of the bulb on the wrong side, the light will not go on. I do not think it affects the bulb in any way. At least it did not damage mine when I inadvertently installed it on wrong end and flipped the light switch on. I just corrected it and it worked fine. So if your light is working, that means you have it installed on the correct end.
Will these bulbs cause issues with wifi or garage door signals? I've seen manufactures of bulbs on the market claiming that there's don't, which makes me think that some or all do. Can you set the record straight for me, please.
Hi, quick question, did you have to change out the tombstones to non-shunted ones? My fluorescent lights look almost exactly like the ones that you switched out. However, I know that when I take one of the light bulbs out (one of the end ones) then the other end one doesn't work. Does that mean that it has shunted tombstones? And if so, would I have to switch out the tombstones for me to make this conversion? Thanks in advance for your help!
Nice Job! My only concern is that LED lights throw off an electrical interference with different types of radio signals. I was thinking of replacing my overhead 4 footers with LED, I'm doing a lot of audio repair in my shop and if that's true, that would be a problem. We can't use our kitchen radio with our new LED cabinet lights are on.
I always knew if I found a guy named Frank he would give me the easy,correct way to change these bulbs. Thanks for the easy to understand explanation.
Lol. There we go!!!! Love it
Of the dozen or so videos of florescent to LED conversion that I saw, you’re the first who made the “hot/live” on side, and the neutral on the other side rule absolutely clear. Thanks!
There we go!!!! Appreciate that feedback
Just wanted to say that these instructions were incredibly easy to understand, easy to follow and easy to replicate. Thanks so much for posting this!
Absolutely my pleasure!!! Thanks for the feedback
Frank, thank you for this video! A lot of the videos I watched and websites I looked at were making this so confusing. Well my head isn't going to explode anymore after watching this video. Great job!
Appreciate that feedback 😁😁
FRANK!!! Thank you!!! I went through 10 different videos and none were clear. Your's was top notch, perfectly clear and to the point awesome. Just changed my first one in less than 10 minutes. Only have 31 more to go!
Lol. Definitely saved some cash in all the different ways there!!!! Glad I could assist
Thanks Frank!! My garage has 21 of these 4 bulb / 2 ballast fixtures. All my ballasts have gone bad an I was looking at close to $2000 to replace them. Now I’m looking at less than $500.
There we go!!!! Glad I could help
I have a commercial building with over 75 fixtures that I have to change over. I have watched every change over video and this is the BEST two ballast video on TH-cam. Electricians are charging $300. per light in my area, which is totally unaffordable and I will be doing it myself. My neighbor just paid $4,700 for a single store to change over...that's nuts! Thank you for the perfect video, I started yesterday. Cost per fixture, less that $10. in materials including new wire strippers.
Frank, this is by far the best instructions, thanks for the awesome video!
Absolutely. My pleasure
Apprentice electrician here, i thank you for your instructions throughout the entire process. First time working with ceiling drop lights
Love commercial buildings and clients. Suspended ceilings definitely mostly always makes it easier to work. Keep it going.
Thanks Frank,
Easy to understand video. Watched a couple of others but yours is the best!!
Appreciate that feedback
Thanks again,
Forgot to mention that in whole youtube your video is most easy to understand for 1st time Lerner.
Thanks 😊
Appreciate that
I met an electrician at the Flora-Bama who told me how by-pass the ballast in my florescent light fixture rather than replace it. He told me to find a video to learn how to fix it. Thanks random guy ar the bar and thanks Frank for your great instructions. Now my laundry room has light!
There we go!!!! Let there be light
This is the best video on TH-cam for this application. Thank you for your time and doing this.
Great video. I followed you video step-by-step, got my LEDs installed and everything is working perfectly. Thank you for sharing this information with us.
Absolutely! Glad I could assist
This is great, my apartment has both t8 and t12 this is gonna help very much getting those LEDS installed. Thanks ya Frank.
First - Lockout/Tagout the breaker panel, and/or black tape across the light switch in off position. I got blasted off a 14 foot ladder by 220v when a security guard turned the power back on while I was wiring in a ballast. I also use a black permanent marker to write "LINE" inside fixture by tombstones on one end (closest to line source), and "NEUTRAL" on the opposite end by other tombstones. Also use electricians tape on my wire nuts to make sure they don't vibrate lose with time. My electricians tape is primarily Black, White and Green as needed for line, neutral and ground. One last thing I do for wiring is to neatly coil it up and use a wire tie(s) to hold them bunched so you don't pinch them when reinstalling cover. I have been using these methods since 1974 when I was starting out as a electrician's laborer. Great video Frank! As others said, straight forward and to the point. 5 star dude!
Small world. That sounds like a bad day, Jim! I just rewired my garage lights today to bypass the ballasts. I had type A LED bulbs in there and then the ballasts went bad so I just decided to rewire the fixtures and use type B. I also use electrical tape on my wire nuts so I can sleep better.
Wow….You really simplified this process, easy to follow. Thx 🤙🏼👊🏼
You got it 💪💪
Frank, your video tutorial is excellent and right to the point. Better than many of the confusing TH-cam tutorials being posted on this subject. Might I suggest though that it's always a good idea to temporarily cap the hot and neutral wires after disconnecting the tombstone wires, just in case someone inadvertently turns on the light switch. Also, viewers should know that this conversion will not work with Type A Ballast Bypass
Single-End Powered LED replacement bulbs which require non-shunted tombstones to be specially wired. Thanks for posting!
Appreciate the feedback 💯💯
Hey papi, I bought a led light fixture and when I opened it I thought it was a joke. There is two 18” led strips secured to the inside of the housing. I supplied 120 volts to it. Wow definitely worth the money. The old fixture had a bad ballast. The new led fixture was around the same price as a new ballast.
@@danp7463 💯💯
you two dating?
Best explanation on how to do this I've seem....Thanks!
Appreciate that
Got a bunch of T12 lights to start replacing and your video is my favorite to plan my work. Thanks
Appreciate the feedback thank you
Great job Frank - very clear. You should be training apprentices in the IBEW but thanks for training me.
@@kronoberger lol. Appreciate that. Glad I could assist
Thank you, you made it easy to understand. Appreciate it very much.
@DJ-zw8kw my pleasure. Glad I could assist
Thanks! My room has these because it’s in the basement. I really wanted to replace the tubes to LED, and now I finally know!
There we go!!! Glad I could help
Great video,short sweet and to the point.
I wish you lived near me! I’d feel very safe with your work.
Appreciate that feedback. You can do it yourself not too difficult. Hopefully the Videos show you all the details
Nice job! Thanks!
Appreciate the feedback!
Excellent video! Very easy to follow, and to the point. I'm going to mark each end of the fixture "L" and "N" for those replacing these bulbs in the future.
Great video, im going to try this on ten units!
There we go!! Just make sure to turn power off
Thanks for your great teaching video!
Thanks for these very easy instructors. Curious question. What happens if you put the bulb in wrong?
@geraldstewart2556 not sure. I didn't want to find out, but would be a good video. 🤣
Beautiful beautiful 👍👍👍nice and easy
Love hearing that
Great video! Easy to flow instructions. Subscribed!
Appreciate that feedback 🫡🫡
Holy crap! Super helpful! Thank you!
Thanks for the video. From Cyprus
Great video ! Quick and easy thank you very much!
You got it. Appreciate that feedback
Thanks Frank for the visual and your not bad to look at either.😉
You made this so easy to understand!! Thanks so much!
Thank you, your video was very helpful.
Appreciate that. Glad I could help 😁
Thank you sir. Best instructions yet.
Best video yet. Thanks Frank.😊 Totally understood.
Easy to follow video. Tks! Just to ask, I notice swapping the bulbs out works fine (*seemingly). What does bypassing the ballast and direct-wiring to the LED 120 actually do?
You can't use a ballast with led lights at least not these. So you have to override the ballast
Very good information....Thanks for the video
Where is I can buy the door frame for that light?
Tough question, usually if that goes bad might as well replace the entire fixture
Thank you!
Too much work to do 0:50 for me! I just need inside fixture frame Lens. More easy for me to replace open frame door. 😅
My two ballast 4 bulb fixture is different. The left end and right end wire colors to the tombstone's are diagonal from each other. Red/blue X and yellow X opposite from each end. So it's not always all one side neutral and one side hot but the double end type B bulbs don't matter so I see you are correct.
Great job! Thank you very much!
My pleasure
Best video I've found that shows how simple the retrofit to LED.
The LED bulbs are they called a dual- powdered bulb?
Appreciate it. 💪
Excellent video. Thank you sir!
Nice work, Frank. Super clear instructions and good work to the videographer too. What if I wanted dimmable LED bulbs? Do they come dimmable and can you recommend a compatible dimmer?
This is awesome! Thank you!
There we go!!! Appreciate the feedback
Great Video Frank! So a little help though, I got mine all wired up but was struggling getting the wire nuts on and a good connection in my 4 bulb fixtures. I had to use big red ones to even get the 6 wires plus the power lead on and after getting it working, now 2 hours later it's not... and I suspect those connections. You said something about "brown" wire nuts, can you elaborate please. I figure I'm gonna have to get back on the ladder and re-strip the old ballast wires longer and I feel I need better, maybe even longer wire nuts.
Thank you so much my friend.
Found your video the easiest to understand, but have a question. Will this method work for direct wire led bulbs? We have the exact same fixture but just bought the "plain" led t8 bulbs instead of bulb with the switch or the one marked L and N2.
@vickiestrong1029 possible those could work. Not sure if the wiring is different on those would have to look at the instructions. But definitely the ones labeled L and N are easy to install
@@fbaltierrez thank you so much for your quick response. I continued searching and found on the double ended bulbs like we have, you just take all 6 wires (2 blue 2 red 2 yellow) from one end of fixture and connect to your load line. Take the other 6 wires on other side of fixture and connect all to incoming neutral wire. Also found where I can buy the retro fit stickers to go in fixture once the conversion has been done.
Great video !!!! Course why you only put two bulbs back in and not four bulbs in
That's what the customer wanted. Appreciate the feedback 💪👍
2 5000k Daylight are as bright as 4 40w old florescent bulbs..
Good to know was looking for something like this in my basement. Question is do they stop working after a few months like the old style bulbs do?
This one we did. One year later and these are still running well
It has got to be an improvement over 20 year old light fixtures that a constantly broke
¿Se puede dejar las balastras conectadas? Y simplemente colocar las lámparas led
Very nice, thank you for sharing
I didn't see anything that marked which side of the fixture had been wired as line/hot with the other identified as neutral. Seems like this would be good for others replacing tubes later.
You can do either side as I have seen. As long as you install the bulbs correctly according to its wiring diagram
That sticker instructs you to place the sticker on the power side of the fixture... not on the neutral side or in the middle.
Just use marker and write next to tombstones L or N.
Great video. subscribed! Is this configuration for double ended bulbs and non-shunted tombstones?
Great video, looks easy enough.. 😂 so if I wire the same way and decide I need more light can I pop in 2 more LED lights? So one fixture would have 4 led strips? To save money for my office going to do two LED strips but some rooms might need more light then others.
Frank you're the Best! can I hire you to replace mines?
On the video you did put power and neutral at different sides, but the instructions for the lights on your Amazon link says the power and neutral goes on the same side, in a non-shunted lamp holder. What is the correct way? Are the lamps on the link the verry same you was installing? It can be either way? Thanks.
I used the bulbs that have the line on one side and the neutral on the other. I keep using these because they are pretty starivhtforward and easy to install. Hope that helps
@@fbaltierrez Perfect. I'm using those ones too. Very easy.
Hello Frank, because you connected all the wires can you install led lamps in the two unused tombstones?
Thanks Frank. This is very clear and helpful.
Now your instructions are 2-years old and I'm not sure if just replacing the old lights with LED ones was an option back them, I may be looking to follow your method BECAUSE I simply replaced the old fluorescent lights with new "plug and play" LED ones. However, the issue I'm having is that now I have an insufferable buzzing coming out of the fixtures and my question is, is that normal, and if not, is there a way I can correct this?
some of the answers when searching for a solution speak to a dimmer as the cause, but I don't have a dimmer, just a simple 3 switch panel for 3 lights in the room. I'd appreciate any input. Thanks in advance.
I haven't had any buzzing, maybe the light bulbs would come to mind first Because if you override the ballast there should be no buzzing. So check the bulbs. Hopefully that helps
Man you made that look so easy. I replaced two ballast about 3 years ago and I just had another one go bad. I'm done I'm going to replace all the bulbs with LED counterparts. Thank you my friend that's a snap and I'm going to get right on it within the next week or so
Do the LED bulbs last a lot longer then the fluorescent it seems like I’m always replacing the bulbs in my garage
Definitely an upgrade in light output, efficiency and durability
Great video
Nice1..Frank & thank u
Great video to do a test light fixture
Is it easier to just replace them with edge-lit panels?
Yes and no. Way more pricey that route
Thx for the video. What LED bulbs are you using. At “the red store” they have conversion , type b , universal? What bulbs work for this type of ballast elimination? Thx in advance
Good afternoon. I linked some in description it's my Amazon Affiliate link. But those are the ones I used
good video
Appreciate that
Hi, if I have multiple light fixtures on the same switch, Can I just convert one of the light fixture from fluorescent to LED light bulbs? Or do I have to convert all of them?
Have to do them all individually 1 by 1
@@fbaltierrez Yes, But If I convert 3 of them this week and the other 3 next week. Will all 6 work or only the 3 converted once will work until I convert all of them?
@mananpatel7073 yes I would say yes
Do I have to turn off the breaker or just the switch?
You can do both, to be extra safe
So what type bulb? Type A or B or whatever.
1 of my Tombstones is broke any video of how to replace that>?
No, but that is pretty straightforward you but those at lowes or home depot. And just change the wires to the new one.
Thanks Frank !!!!!!
To go from fluorescent to LED, this work has to be done? I was told the new LED bulbs would work just installing them, but my light fixture isn't working.
Geat thaks for sharing
You got it!!!!
Is the starting time for the LED replacements for fluorescent tubes faster? When turning on fluorescent tube lights, it takes several seconds for the lights to turn on.
Maybe you should also label which side is hot and which side is neutral, so the next person that changes the LED tubes will know how to install the replacement LED bulbs.
You can buy fluoro lights that turn on instantly
Question: How about when you have 2 hot wires black and red, then neutral white? Thank you!
Good Job Frank! Do they make LED tubes that can be dimmed? That would be at the switch.
Great easy to follow video! But I am a little bit confused. The link to amazon for the bulbs say they are single ended power and require non-shunted tombstones. I wasn’t sure if maybe the bulbs are different now or if they will work ok the way you demonstrated. Again, thanks for the video.
Thanks for the video!
That made it simple. Ty
My pleasure
Good video
Hi Frank, I’ve already replaced my Mom’s fixture with leds based on your video (thank you for explaining it so well) but I forgot to check to make sure the line and neutral label on the bulbs were on the correct side. The lights work perfectly however and I am just wandering if I should go back and double check the sides? What exactly happens if you have the bulb turned around incorrectly? Will it damage them over time? Thanks again!
I definitely would double check. What can happen not sure but I would not take the chance.
IF you put the power side of the bulb on the wrong side, the light will not go on. I do not think it affects the bulb in any way. At least it did not damage mine when I inadvertently installed it on wrong end and flipped the light switch on. I just corrected it and it worked fine. So if your light is working, that means you have it installed on the correct end.
Will these bulbs cause issues with wifi or garage door signals? I've seen manufactures of bulbs on the market claiming that there's don't, which makes me think that some or all do. Can you set the record straight for me, please.
Good question, dang I wish I had an answer for you. I have never installed them in places where I would be able to verify that. Sorry
Thank you for your help. It was so scary to change my office light bulbs. How do I reach out to you again?
Thanks
My pleasure
Hi, quick question, did you have to change out the tombstones to non-shunted ones? My fluorescent lights look almost exactly like the ones that you switched out. However, I know that when I take one of the light bulbs out (one of the end ones) then the other end one doesn't work. Does that mean that it has shunted tombstones? And if so, would I have to switch out the tombstones for me to make this conversion? Thanks in advance for your help!
With a single ballast it's the same process ?
Nice Job! My only concern is that LED lights throw off an electrical interference with different types of radio signals. I was thinking of replacing my overhead 4 footers with LED, I'm doing a lot of audio repair in my shop and if that's true, that would be a problem. We can't use our kitchen radio with our new LED cabinet lights are on.
That’s proof old stuff is sometimes better than the new! LED’s do that so bad that I have switched back to incandescent which fixed everything
which nuts hold 7 14ga solid wires?
@@justin-tv3pc I use brown wire nuts
Dont you have to kill the breaker? Even though you flipped the switch the wire is still hot no?
No
Ayyy man, thanks for the simple tutorial. I have some in my house I am going to tackle. Any trusted brands of LED tube conversions you use alot?
Lowes has a great option. Direct wire
Thanks!!
You installed 2 LED bulbs. With the way you wired it, are you able to add a3rd and 4th bulb if you need it? Thanks! Good video!
Absolutely can be done
@@fbaltierrez Would I need to add additional wiring, or did you wire it so you could use 4 bulbs?
The reason I ask is because I need to convert my 4 bulb fluorescent fixture to LED
My fixture connections (Tombstones) are shunted. Will this matter? And, do I wire it the same way you wired yours?
@@forestmorris2996 you can buy new ones, relatively inexpensive.
On that 4 lamps fixture is a single ended connection.
Yes. Hot on one side neutral on the other
thanks for the video