So many haters saying "this guy" one thing and "this guy" another thing. I've got one for ya: this guy is sitting in a PC1250 and you're sitting at your computer. The truth hurts!
I know my comments are years late but this is awesome footage, how many tons were loaded? Keep up the good work. I like the close ups of this material iron ore being loaded and handled by the excavator, with that big bucket.
my only complaint is why does this smaller excavator have a damn air horn when the pc2000 I ran had 4 electric horns that the drivers could barely hear....not fair
Hi DDD, I want a go! Thanks for the upload. Have subbed, and its nice to be able to get the radio on it also AND English! Are these trucks getting loaded 63 yards? I am assuming the bucket, as ref ‘7’ yards per bucket? Thanks from a hard core fan of Mining Machines, OK? Take care mrbluenun
He is working a bit to close to the mashine i think. The mashine is stronger when you dig a bit further away from it. When you do its much easyer to get those buckets heaped, and it gives you a bit shorter lift time to the trucks since you dont have the bucket all the way in under the mashine
You see the bench continuing behind the mashine so there is no reason for him not to stand a couple of meters further from the edge to increase digging force, easier fill the buckets and shorten cycle time. Its not bad loading but it could be better :)
love all you guys who operate these massive machines lol think yous are good any one can load a truck lol thats what beginners start doing you wanna see skilled operaters go wacth some 12 to 30 ton machines who final trim do batters stuff like that anyone can sit in a big old dinosaur and load trucks lmao
Painful to watch, I run a 1250 everyday or larger, never seen a full bucket mainly because he is sitting to close to his cut, and soon as that bucket it in the box should be already dumping, not lining up straight every time you dump and your cycle times will be a lot faster and trucks won’t be lined up
All you do is post negative comments on every ones videos you seem to be one of those fools who get of on Critasize condeming and complaining... why don't you put your money where your mouth is and post some videos of how you think its done ..... just for the record for you and the other ralf mouths.....I am sitting on ore block and and scrapping around on last of waste before loading out last of ore block in this cut...so shove your truck cycles where the sun don't shine.
Ce pseudo pelliste travaille bien trop prêt de son train de chaines il en résulte un cycle de cavage bien trop long et des godets mal remplis ; il a encore du progrès a faire , le mec . Une minipelle suffirait amplement pour apprendre .!!!!
This guy is working way too close to the machine, and he is a sorry "operator" because he doesn't know how to get a heaped bucket of dirt. I run this type of equipment, so I know what I'm talking about.
Chess PlayerElite in the description it says he's at the end of the cut. So that's why he's working close to himself you should know since you run this kind of equipment. Also even when you are in the wide open and sitting on a decent size cut you work under you since the cut your on is high and you need the trucks to back up to you close. If you work out far the trucks can't get close enough to you.
mouth merchant love to see you operate I bet you be lucky to operate a garden spade.
Some ruff Bastard got it with the PC3000
buen ejemplo de operación de alto tonelaje, excelente bien ... 100 *1000
I'm yet to see a "full bucket", air in every pop
Nice vid, subscribed and Liked.
So many haters saying "this guy" one thing and "this guy" another thing. I've got one for ya: this guy is sitting in a PC1250 and you're sitting at your computer. The truth hurts!
You can not sing well that means you cant say that a singer is good or not ?
I know my comments are years late but this is awesome footage, how many tons were loaded? Keep up the good work. I like the close ups of this material iron ore being loaded and handled by the excavator, with that big bucket.
my only complaint is why does this smaller excavator have a damn air horn when the pc2000 I ran had 4 electric horns that the drivers could barely hear....not fair
good video!
Hadir bang mantap hati bng👍🙏🙏
Hi DDD,
I want a go! Thanks for the upload.
Have subbed, and its nice to be able to get the radio on it also AND English! Are these trucks getting loaded 63 yards? I am assuming the bucket, as ref ‘7’ yards per bucket?
Thanks from a hard core fan of Mining Machines, OK?
Take care
mrbluenun
How many cubic meters for this bucket.
im thinking he clipped it while tail loading
how are you filming this and operating at the same time
He is working a bit to close to the mashine i think. The mashine is stronger when you dig a bit further away from it. When you do its much easyer to get those buckets heaped, and it gives you a bit shorter lift time to the trucks since you dont have the bucket all the way in under the mashine
rotortilttt in the description it says he's near the end of the cut. That's why he's so close to himself I'm assuming.
You see the bench continuing behind the mashine so there is no reason for him not to stand a couple of meters further from the edge to increase digging force, easier fill the buckets and shorten cycle time. Its not bad loading but it could be better :)
rotortilttt
Mashine lol
Mass PC1250 IS 110 Tons GOOD
Then what's the excuse for the small buckets, lack of a true dig pattern and not being a smooth steady operation in your dig cycle?
big super
Voll Dass Gute Video Weiter sooo
What kind that half bucket. Dont how to full bucket rookies i tell you .
the Bucket's NEVER big enough, is it .....
love all you guys who operate these massive machines lol think yous are good any one can load a truck lol thats what beginners start doing you wanna see skilled operaters go wacth some 12 to 30 ton machines who final trim do batters stuff like that anyone can sit in a big old dinosaur and load trucks lmao
Painful to watch, I run a 1250 everyday or larger, never seen a full bucket mainly because he is sitting to close to his cut, and soon as that bucket it in the box should be already dumping, not lining up straight every time you dump and your cycle times will be a lot faster and trucks won’t be lined up
No No No No No ! -__-
what the fuck happened to the 2nd trucks ass end
.......super super super......
Facebook Lite
😎😏😎😏😎😏😎😏😎😏😎
1250 это сила
Тот кто работал поймет
Chess PlayerElite , i agree with you ... Bad operator !!!!!
All you do is post negative comments on every ones videos you seem to be one of those fools who get of on Critasize condeming and complaining... why don't you put your money where your mouth is and post some videos of how you think its done ..... just for the record for you and the other ralf mouths.....I am sitting on ore block and and scrapping around on last of waste before loading out last of ore block in this cut...so shove your truck cycles where the sun don't shine.
Diesel N Dust N Dirt you tell em mate, full respect to you mate awesome skills !!
Love seeing aussie machine operating videos !
Ce pseudo pelliste travaille bien trop prêt de son train de chaines il en résulte un cycle de cavage bien trop long et des godets mal remplis ; il a encore du progrès a faire , le mec . Une minipelle suffirait amplement pour apprendre .!!!!
This guy is working way too close to the machine, and he is a sorry "operator" because he doesn't know how to get a heaped bucket of dirt. I run this type of equipment, so I know what I'm talking about.
Let's see your operator videos then hot shot.
Chess PlayerElite in the description it says he's at the end of the cut. So that's why he's working close to himself you should know since you run this kind of equipment. Also even when you are in the wide open and sitting on a decent size cut you work under you since the cut your on is high and you need the trucks to back up to you close. If you work out far the trucks can't get close enough to you.
Chess PlayerElite ķ
Apparently you can’t read.
best operator I've seen in a long time.
Свинорой и ковши не полные
Bad performance
tronghailoveit 😂😃😆✌✌✌
very good operator.
沒專業!!..太弱了...........=.=
.منظمو حجازى ..
دظ ءضص