Installing An MPI Supercharger Lid On My Cammed Camaro ZL1 1LE
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- I'm sorry guys, it took me a while to realize the audio on the last one was messed up and I had to re-upload, hope this one is better!!
Installing An MPI Supercharger Lid On My Cammed Camaro ZL1 1LE
MPI LT4 Supercharger lid - www.mechanical...
FOLLOW ME ON INSTAGRAM! @ZMURFZLE
zmurfzle
Join my Discord for chat, notification on live streams and open lobbies, video ideas, and more!
/ discord
Like and Subscribe! Thanks for watching! Follow my social media to keep up!
Instagram: / zmurfzle
Twitter: / mustangmatt116
That Viper is 🔥
I have a 19 zl1 A10. My buddy has a 2019 zl1 manual. His blower stock vs stock is 2 to 3x louder than mine. Maybe the a10 takes more power and dampens the sound.
Thats looks clean ngl👍
Awesome vid. Great work. Thanks for the biz!
Yes sir thanks for the awesome addition to my car!!
No shops making lids remove the steel plate in the stock lid before making a dyno pull. It takes 20 minutes at the most and removes the heat sink at the exit of the blower before it goes into the bricks for cooling... so essentially they are attributing their power gains by comparing apples to oranges.
I track my ZL1-1LE, and the difference between running the plate and removing it is about 20-30 degrees calculated MATs on a sustained 3-7th gear pull at Road Atlanta.
I had my plate off and it made 0 noticeable difference. This made a noticeable difference. BUT as I said in the video I did this mod 90% for sound 10% for looks. Car makes almost 700 and has a wicked powerband with the cam through a 10 speed makes for a lot of fun.
@@Aperturealloy Which cam are you using? My analysis is based upon extended pulls, lap after lap for 30-45 minutes of continuous hard pulls on a road course. In this environment, the steel plate removal makes a big difference.
Good video 👍🏻.
Add some dex-cool coolant. Man
Nice car man. Any recommendations in south Florida for a zl1 owner in terms of mechanics and/or doing a zl1 to Zle bumper conversion?
Sounds great, did you need a retune after installing the lid?
Where did you get the Dyno done. I have a boosted Mustang gt and want to know what it making.
I can hear it on the video over your loud ass cam and exhaust so im sure i will be able to hear it on mine with just a borla axle back
did you have any gasket fitment issues? I saw another video where the gasket was slightly bunched up because of a different cutout pattern
I just saw that video before this one XD if we're talking about the same video I saw it on (Ride Of Life)
@@silverrockstar100 if it helps i did not have any fitment issues. all you have to do is spread the "slack" in the gasket around the entire relief. if you make it VERY tight from your starting point to your end point, it will have some extra bunched up material. but if you leave some "slack" between your starting point and finish points, it will be fine. you can also reposition it as much as you need.
Oh yeah its a pretty big difference
This video has way too much wasted time. I guess everyone should make thier own channel. Haha
This is a thorough installation video for those that need it to install the part on their car. Sorry you're not thoroughly entertained by my informational video. If it's so easy then you go do it and get thousands of views.
@@Aperturealloy Dont worry man this video gave me tons of info, im really looking to get a zl1 next year so this video will help me out alot 🙏
@@Mxgxel_5.0 Just FYI, Chevrolet is discontinuing the Camaro ZL1 this year (2024). I'd hurry if I were you. I just got mine last year (2023) in May.