Very good, just a couple notes, you do not need to remove the fender liner and fuel tank filler to drop the cradle out, I've done it that way myself, and also, you can remove the upper arms with the cradle in the car, you however will need to cut the bolt and buy a new one, install it reversed; but it is doable (edit missed that part in the video LOL)
Great info! I’m going to pin this comment. Yea I mentioned the bolt cutting at the end. I also did mention it doing it this way because I’m replacing the sway bar, diff, axles and bushings. So this made the best sense for me but doesn’t mean everyone has to do it this way if their just doing control arms.
@@TIRADORACING Forsure bro, I would like to replace my swaybars eventually, also I think you mentioned it too, but you definitely want stiffer cradle bushings for the manual swap, helps reduce wheelhop alot!
Crazy how things works out. I was just talking to my buddy from work about wanting to manual swap my 6.1 challenger but I wouldn't know how to go about that and what's involved with a task like that. I'm looking forward to seeing the process 😁 great vid as always 👍
Great video !! Wish I had seen this before I tackled the break kit swap on my car. Also, mazing to see the quality of content continue to evolve man, keep killin' it ! I'm curious to see how these mods change up your car with the roll cage and all.
Very good, just a couple notes, you do not need to remove the fender liner and fuel tank filler to drop the cradle out, I've done it that way myself, and also, you can remove the upper arms with the cradle in the car, you however will need to cut the bolt and buy a new one, install it reversed; but it is doable (edit missed that part in the video LOL)
Great info! I’m going to pin this comment.
Yea I mentioned the bolt cutting at the end. I also did mention it doing it this way because I’m replacing the sway bar, diff, axles and bushings. So this made the best sense for me but doesn’t mean everyone has to do it this way if their just doing control arms.
@@TIRADORACING Forsure bro, I would like to replace my swaybars eventually, also I think you mentioned it too, but you definitely want stiffer cradle bushings for the manual swap, helps reduce wheelhop alot!
You got a video of you doing it that way?
Crazy how things works out. I was just talking to my buddy from work about wanting to manual swap my 6.1 challenger but I wouldn't know how to go about that and what's involved with a task like that. I'm looking forward to seeing the process 😁 great vid as always 👍
Thanks!!! I have to swap my diff. In my 11 srt8. This was helpful.
Honestly not too hard of a job!
Great video !! Wish I had seen this before I tackled the break kit swap on my car. Also, mazing to see the quality of content continue to evolve man, keep killin' it ! I'm curious to see how these mods change up your car with the roll cage and all.
Thank you and yea I def can’t wait either it’s been way too long!
@@TIRADORACING Vamo' arriba!
Hey bro did u ever pin point what that clonking noise in the rear passenger side was? My wide body is making that same noise and idk what to do
Nope! Never found the cause, never caused any problems either lol.