Stair Skirt Board Installation Master Class | An In Depth Guide
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- In this video I walk you through a stair skirt board installation step by step. We cover everything from how to layout, take measurements, determine cut angles, integrate with baseboard, and lots of tips and tricks along the way.
Stabila 48 Inch Digital Level - geni.us/Rqc9A (Amazon - Earns Commission)
Shinwa Chalk Line - geni.us/0i3u1 (Amazon - Earns Commissions)
0:00 Intro
1:49 How to Determine Top of the Skirt Board
4:57 Should you use 1x10 or 1x12???
6:37 Laying Out Bottom Cuts
8:10 Laying out Top Cuts
10:27 Tip of Getting Long Measurements
11:00 Cutting - Always Check for Cupping
12:00 Visualize the finished board in place when cutting.
13:06 Cutting The Board with Miter Saw
18:06 Board Stretcher - Making the Board Longer
20:49 Installing Long Board Sections
23:41 Leave the Skirt Long for Mitering Skirts Around Corners
26:58 Layout and Cutting Another Section
30:24 Mitering Skirt Board Into Baseboard Around a Corner
32:13 Last Skirt Board Section
33:17 Jointing Baseboard Sections that Flow Flush
34:10 How to Join Skirt Board to Thinner Baseboard
39:10 One Last Important Tip on Skirt Board Cupping
My Favorite Tools - Insider Carpentry Amazon Site - www.amazon.com/shop/insider_c...
-Support more content like this by becoming a PATREON SUPPORTER - / insider_carpentry
-INSTAGRAM - insider_carpentry
-As an Amazon Associate I earn from qualifying purchases. - แนวปฏิบัติและการใช้ชีวิต
Thanks for your continued support!!!
Stabila 48 Inch Digital Level - geni.us/Rqc9A (Amazon - Earns Commission)
Shinwa Chalk Line - geni.us/0i3u1 (Amazon - Earns Commissions)
My Favorite Tools - Insider Carpentry Amazon Site - www.amazon.com/shop/insider_carpentry
Spencer your such a talented young man. Thanks for the detailed knowledge and sharing. I make no claims to be a carpenter but many years of drywall has given me the ability to adapt principles to carpentry. A job I’m doing the homeowner asked me to redo their stair cases in hardwood and I was very nervous but when I found your videos and watched them over and over I did my first set of stairs and it turned out beautiful! The only thing I didn’t do was add the furring strips to the stringers and I was wondering why you do that? Any answer would be appreciated so I can add it to the knowledge. Keep up the great work!
How many hours does it take you to finish a run of steps? Skirt, risers, and treads installed.
@@mattheworoark1459 It took me a few days being I’ve never done them before,but the videos Spencer posted gave me the tools necessary to add to my building experience. So awesome because they turned out beautiful!
I'm working in Georgia in houses that cost to build between 3 and 10 million dollars and trust me when I say this....nobody take his time like you doing a better, durable and quality job as you do.....I learn a lot from your videos and I put it in practice every time that I can.....Thank you....👍
What part of Ga if I may ask
@@kingreno35 Lake Oconee
@@edmondantes4551 gotcha I’m in Acworth need a little help lol
@@edmondantes4551 wish you were closer
I know only one other Carpenter on TH-cam with skills like yours.
Hey Spencer, this video was very timely for me. Although I have been doing carpentry for almost 47 years, the majority of my work has been in the commercial world. I have built a lot of stairs in my time, but most were plywood treads and risers that were covered by rubber treads and risers, and most didn't have skirt boards. Right after you posted this video, I was going to do my first residential finished staircase in 30 or 35 years. Watching your video brought back all of the things that I had forgotten, and I learned a few things I didn't know.
The staircase turned out great, and the skirt boards fit the first time. Next, I'm going to re-watch your pocket door trimming video.
You can teach an old dog new tricks. I enjoy all of your videos very much.
I have a great respect to someone who can build stairs like this
Spencer - Bro...I’m a custom woodworker and former aerospace engineer, and I still feel intimidated by any kind of stair work. You’re a master craftsman!!! Great work 👍
BTW...I just finished making three miter-fold beams out of Ash that I’ll be installing in my client’s house next week. Your videos gave me the knowledge and confidence to tackle the job. THANK YOU!!!
A lot of guys have gone to charging for their “master classes” and such in depth content, not judging them for it, but I can’t thank you enough for the exceptional content you provide at no cost.
Master class is a scam
I did my first professional stair job and I wanted to thank you for helping me make a living with the knowledge you shared
I didn't think I'd enjoy a 40 minute video... but here I am! What felt like ten minutes later! Great video
I’m doing my first finish stair. Job right now and this video is going to be a great help on things I was not sure on. Thanks a lot!!!😅
I love how confident you are with your measurements. I’m always struggling with remeasuring and getting doubts that cost me time and, as result, money
If I could give 10 thumbs up, I would. I have watched many of your videos and I enjoy them all. But this one is by far my favorite. Thank you for the drawings and the explanation of how to cut the boards at the correct angles. For those of us who are visual learners, that quick sketch of the shape of the skirt board is priceless.
Thanks for the feedback!
My fav TH-cam carpenter! He explains himself clearly and includes the tools he uses to accomplish various tasks. He's honest and takes his responsibilities and job commitments seriously, but makes his videos enjoyable to watch while you learn.
Thanks for the great content Spencer. I have done a lot of finish carpentry and consider myself pretty good at it. Stairs are my kryptonite (specifically the transitions). The amount of time and detail in this video is top notch .
Spencer, I have installed a lot of rough stairs but nothing like what you have done here, what I refer to as formal steps. I watched your videos on these steps and paid close attention. Since I used 1/2" plywood for the skirtboard I put a trim piece on the top of the skirt board. It was all painted afterwards. I started at the top of steps and started installing from the top down. By doing that I could hide all my nails. I also used Gorilla glue on the stringers when I was installing the treads. Without watching your videos I dare say I would have a more difficult time. The building inspector (who use to install stairs) told me I had something I could be really be proud of. It made the wife happy anyway.
I have been in the construction industry for over 50 years and you are without a doubt the best and smartest trim carpenter I have ever seen.
Glad it turned out well for you and thanks for the kind words!
I have to say, this is the very first video that I've ever downloaded from youtube so I can watch it again, anywhere, anytime. This is a wealth of knowledge and a great reference! Thanks, Spence!
This was incredibly useful. I've got a few puzzling steps in my current remodel that I'll definitely keep referring to this for.
Hi Spencer You and Robin Clevett in UK are outstanding examples of superb standards and detailed planning as well exceptionally clear and easy to follow instructional videos. Thank you. I have learned more than I will ever use from both of you. Mike
Just finished my first stairway with a center landing. It turned out well, but I wish I would’ve caught this video first😏
Great job and great teaching. So grateful 👍🏻
Thanks for some really useful lessons on stair trim. The complicated miter cuts were especially informative.
I rarely 'Like' any videos and subscribe but just 10 minutes into this - I did just that. This is amazing detail!
Fantastic job. Great explanation and thanks for sharing your tips and techniques. You are a true craftsman.
You're very thoughtful and meticulous and definitely one of the best professionals I've ever seen . I've learned so much from watching your channel I'm still learning.
Recently did one very similar Spencer except with housed stringers, I am very grateful to have a trim carpenter on our crew with 35 yrs under his belt to tackle it with. Dealt with many of the same issues but came out beautifully. Most people never know what goes into a good set of stairs, but when I see good quality work my wife can’t get me to shut up about it 😂. Thanks for everything, your channel is invaluable.
Your ability to explain a process is priceless. Thanks
Your ability to walk up an down the middle stringer is impressive! Exceptionally good video; thanks for sharing your expertise.
Spencer thank you again for all the advice. I look forward to see these types of videos from you.
Thank you so much for all your time and effort on these videos. Been watching you for a couple years and have learned a ton. I did my first set of skirt boards today after your video gave me the confidence to do it. Thank you again and keep it up.
Hello from Easton Maryland! With all my respect and in my humble opinion I think you can run in the middle of the right skirt board you can make an inch and a half return and meet the other skirt board and finish the bullnose in 90 degrees not in 45 and avoid the the ugly meet between wood and wall. Always is a pleasure to watch your videos and thank you to share your skills. Stay safe.
Hello, also from Easton Maryland! I just finished picking up the supplies to do my stairs and was using your other stair videos as part of my reference. Super happy to see another video of ideas waiting for me when I got home!
I'm just about 45 minutes away from you guys over in Lower Slower Delaware
I use that a lot, it is actually better than a 45 degree.
This was a master class in stair building. Thank you so much! About to tackle mine this weekend!
As always, thank you for sharing your expertise, you save many of us from making mistakes. I know I appreciate your knowledge sharing.
Thanks for taking the time out of your day to help us improve 👍
I really like that you teach @ a near-if not- stain grade level, even for things you know you’re painting Spencer. I rarely get to paint anything and when I first watched your videos I almost cringed when you said paint grade. But then I seen YOUR work and you sir did not disappoint
I appreciate your incredible patience in explaining and your workmanship inspires such respect. The insights on working with imperfect materials are invaluable! Thank you!!
I've been doing flooring for 32+ years. I have always tried to do as good of a job as I can. I learned from many different sources and made up lots of my own tricks and techniques. it's nice to see someone on TH-cam not start the episode by saying I've never done this before but here's how to do it. Impressed by your experience and quality. Thanks for sharing.
That's a cool chalk line 😎 You're an excellent TH-cam teacher I love the presentation and now presentation and how you even incorporate the small little facts that people will overlook. They play a huge part on getting it to Professional grade work.
Mad skills , never knew about 1/8 miter setback for different sizes love it!!!!!
What an excellent tutorial. Thanks! I recently installed a skirt board with similar transitions to deal with, but I took the easy way out. I added a transition block at the top outside corner and the transition to the baseboard. The blocks stick out 1/8" (ie 7/8" thick") for minimal reveal, stand 1/2" taller than the skirt, and have a 1/4" chamfer around the top. It turned out really nice.
This is my first time watching your tutorial video on what you do. The algorithm chosen this video by chance 😁. I'm a journeyman carpenter and I've mainly done metal stud framing and drywall with the Southwest Carpenters with local 1319 in my younger days. But during the pandemic I happened to work some side-jobs during the COVID-19 lay-offs. So I've done drywall, tape/texture, baseboards, door trim, and siding work. The customer really appreciated my work. A year and half later just last week I've done more baseboards, door trim, and crown molding. To tell you the truth I have never done a crown molding work. But I had basic knowledge of how it's done. My first attempt I did a decent job. Chaulking the imperfect joints helped hide the imperfect miter joints. After my work was done I started watching crown molding tutorials because I enjoyed the crown molding work I've done. I believe being an all around carpenter is a must. I enjoy learning new things I didn't know. I also done laminated flooring for the first time this year. My work turned out really nice too. Hopefully in the near future I'll get into trim carpentry work professionally. Practice makes perfect so I plan to do some more side jobs. Even just utilizing 1 byes for baseboards.
Great Lewis,as usual you try the best way possible to gain perfection. My inspiration
I enjoyed this video. You're very efficient and clear in your explanations. Thanks!
Awesomeness. Always love to listen and watch your tips and tricks. Keep on rocking!
Hi Spencer im a carpenter too and just love your videos. tips and tricks you show. Your work is always premium mate great job.
Great video. You are always very thorough with your explanations. Love watching the Pro's work.. Thanks... You always cost me money though just ordered some American made pinch dogs!!! I love tools...
Spencer, thank you for your efforts to help all of us improve
Great video, Spencer! Thanks for putting out the in depth content!
Hi Spencer. Greetings from North Wales, UK. Currently working on a refurb project, and needed to fit a 4M (c14ft) stair skirt (called stringers, here). My usual tame carpenter just did not have a few hours in his schedule, and as it was about to become a ‘stop’ on the project, I decided to do it myself. I am an enthusiastic builder, but tend to leave the front end, customer/home owner facing stuff to the professionals, esp the joinery. Anyways, I watched your vid a few times, and had a go. I followed your steps as close as possible, with the kit I have (eg no angle finder) using levels and careful measurements, and cutting. And lo, it fitted like a dream. Top job, and the project can continue, at pace.
So, thank you Spencer. Keep up the excellent work, and I look forward to watching many more of your vids.
Diolch yn fawr (‘thank you’, in Welsh)
I always second guessed myself when how I finished where like you came down to the landing and had to wrap around and continue so I started looking at other folks finished stairs and realized that there are usually quite a few possibilities. You kinda just have a signature you develop in how you handle those situations and you stick with it. 🤷♂️. The only thing I probably do differently is use a framing square to get the top of my skirt marked but I like your method plus you get your exact angles digitally rather than say using a T bevel and transferring to a board and a speed square to see what angle you have there. Now a digital readout on the slide saw would be nice! 36.3 is a bit hard to dial in the saw. I’d be lucky if I hit 36.5. Close enough. I couldn’t fathom trying to video that process,you do an awesome job at it. Thanks. 👍
wow! amazing information! thank you so much. you have given me the confidence to execute something similar. Phenomenal work as always!
Thank you for sharing your process.
Very helpful information
🙏🏼
Wow…if I did this, the drywall would have massive dents in it…from banging my head against the wall trying to figure out the skirt and baseboard joints! Spenser…you are a master…I’m just blown away!!
When a 40 minute video is put on by Spenser, grab a beer and be inspired… fantastic tip on transitioning different thicknesses on the mitre cut…. Thanks !!!
Cheers!
it’s amazing how well you work alone.
The absolute best video on TH-cam!! Thank you so very much!!
I like you passion! And the day we stop learning is the day we die! Very good teacher! Excellent!
A lot of pointers in this video!! Thanks, Spencer.
About to start some threds and risers.....thx for all your tips and techniques
Man what a absolute pro. Wish I had the opportunity to work and learn from somebody of this caliber. Only ever drunks and idiots on the jobs I’m on. Nice job. Just did my first stair job last week. 2 full sets, skirts, skirts 45 into the new 1x risers. Wrapping trim around the landings. Rails and posts. So much work lol.
Very nice job. Definitely a craftsman. I wish I had you around when I removed the carpet off the stairs and re-placed with white oak treads. I couldn’t believe how different each tread length and width was. I basically had to use a trash board for each tread to get all the angles correct. It did turn out nice but I wished I knew more when I did it. Live and learn.
I know this is a little late posting this but they make inexpensive tread jigs that you flush against your skirts to get an exact scribe for your treads
I like the chop saw umbrella
Wow beatiful work... love the way you explain and walk thru every little detail. Keep up your great work 👏 👍🏻
When it comes to stairs prep is critical. Great video
Thank you for your time and and sharing your knowledge with us,🙏.
Good work 👍 always a joy to see your nice work and learn a trick or two.
I have always try to find an informative video on how to do stairs and youre amazing
You explained that so well. Thanks for sharing. Your quite the master.
You sir have changed the game for me. Thank you!!
Greetings from Spain.
Hard work on site, hard work to translate your knowledge to US,hard work to make this video.
Thanks a lot.
Thanks this method is so much better then how I was shown how to do skirt boards. Installed my first stet of skirts using this method and everything went much better and easier. Everything came out perfect. Thanks again
Fantastic tutorial, love your work 💪
Great point of putting the splice next to the nosing to minimize the visibility. Although that funky corner I would've left tall wrapping around the drywall so that that bottom nose piece would have been traditional. Great job I love your work. I learn a lot thank you so much for sharing.
What a brilliant video! So helpful, thank you!!
Excellent craftsmanship!
awesome work Sir a huge fan from Puerto Rico 🇵🇷 living in USA 🇺🇸 👍
Great job as always. Good job explaining too.
Ive said it before and ill say it again… Spenser Lewis has the best carpentry channel on TH-cam. I work for a stair company, started about 10 months ago and i hold my own with the experienced guys but i am still learning the tricks that take the job from just ok to perfect. And this video has a lot of great tips, ill be archiving this one so i can reference it in the future for sure. Thank you for putting content on the Tube, i love watching all your videos!!
Glad the videos are helping you out. 👍 Learning the stair trade is a great opportunity.
you are really very nimble. Great demonstration. you are an excellent teacher.
Great informative video. I was thinking it might be possible to grab your rake angle by taking two pieces of scrap tread and laying them 2-3 steps apart and then just put your level on that. It will give you your angle and mark in one step. Thanks again for the great content been following for a while now.
fantastic know how, great teaching!
Thank you for sharing this tip. You are the man.
Great content! I’ve got a job coming up that is laid out just like this but the first section doesn’t have a wall on the inside, I’m planning to do treads with miter returns. Would love to see more examples of how to join with profile base molding.
'Keep up the good work!' (quoting Scott from Oregon.) I follow the best. good stuff.
Thank you very much for this beautifully explained video,I really enjoyed every bit of it ,you are the best .and wishing you all the best.
Thank you for a really good guide!
Perfect video, it helped me a lot!!! You are a great professional
Your a great teacher. Thanks for sharing.
good looking job! and a very good teacher.
Great content and a good save on not stepping through the sheetrock with the first skirt board.😅
Finish carpenters rock!!! Beautiful
Thanks again for another great video.
Brilliant great to watch definitely a master carpenter from a general carpenter here in the uk
Nice work. Thanks Spencer
Thank you so much for this tutorial! I’m redoing the stairway at our rental, and it is a nightmare. It was built by a group of homeowners who were supposed to have an experienced contractor over-seeing the project, but he was rarely there, and the result is that the homeowners used 16-penny nails on the treads, risers, and everything else in the stairwell, ha ha.
Anyway, I’m ripping out the treads, risers, and replacing a stringer. The stairway did not have skirt boards, so this tutorial is extremely helpful on how to get those installed. Thanks again!
(“Oh, poo…” made me laugh. Highlight of the video)
Having done alot of similar worrk on high dollar houses this guy is good watching his videos i have never seen him do anything that i would not do myself or learned a better technique or learned somthing new
THIS IS MAGNIFICENT WORK i WISH HE LIVED NEAR ME.. NEED SOMEONE WITH HIS TALENT
Excellent work and video!
Thanks for the video. Couldn't have come at a better time for me. 👍
Excellent tips thanks 4 sharing appreciated
Brilliant video, thank you !!!
the most impressive part of the video is how you walked on the single stringer i would of fallen thru the drywall you do fantastic work
Would have
really nice video! I learned a lot. Thank you so much!