Great video, but i would strongly advise not to use the shake and wake tactic for auto lunch. You want it set so, when you apply 70% throttle its activated and the prop starts spinning at the set amount. Soon as you throw the plane, auto launch kicks in straight away. This is especially important for slightly heavier planes. And eliminates the failed launches and plane crashing to the ground. At least this way if the props spins when activated you know 100% your all good and theres no worries about failures...😉
Just building the exact same wing with DJI 03. Can I ask, how did you mount the air unit? I'm thinking of attaching it to the bottom of the front hatch.
I fixed it inside, so I got a mount (which can be easily removed so that I can take out the card, bind and other things that need to be done with a little modification) for the air unit, which I glued to the foam with hot glue, and I also glued the camera to middle of the plastic with hot glue. The air unit gets great cooling because I placed it in the middle so you don't have to worry about it. Greetings and happy assembling! 🍻
Great takeoff. Wished mine worked that well
Tnx!
Just take care of the settings and everything will be fine🍻
Ooooodlican👌🏼👌🏼👌🏼Bas bas 👍🏻 Ej, vredelo je ono lepljenje 😂
Great video, but i would strongly advise not to use the shake and wake tactic for auto lunch. You want it set so, when you apply 70% throttle its activated and the prop starts spinning at the set amount. Soon as you throw the plane, auto launch kicks in straight away. This is especially important for slightly heavier planes. And eliminates the failed launches and plane crashing to the ground. At least this way if the props spins when activated you know 100% your all good and theres no worries about failures...😉
Awesome! Could you show a picture of how you mounted the DJI 03 hardware? The air unit and camera primarily. Thanks
Amazing
Just building the exact same wing with DJI 03. Can I ask, how did you mount the air unit? I'm thinking of attaching it to the bottom of the front hatch.
I fixed it inside, so I got a mount (which can be easily removed so that I can take out the card, bind and other things that need to be done with a little modification) for the air unit, which I glued to the foam with hot glue, and I also glued the camera to middle of the plastic with hot glue.
The air unit gets great cooling because I placed it in the middle so you don't have to worry about it.
Greetings and happy assembling! 🍻
How does this hold up on the landings. Heard bad things about the nose and back tail fins
Where are you flying at? great spot!
Awesome video. What transmitter are you using?
I wrote everything in the video, otherwise I use crossfire.