just wondering if the Wall Unit Weight at 15:10 is calculated as Unit Wight of the brick [kN/m^3] * thickness of the brick (0.2m)? Because the 15.2 value is just the product of 3.8*4.0 and that Dead Load G should be = thickness of brick [m] * height of wall [m] * unit weight of brick [kN/m^3]... so I don't really get it, but correct me if I'm wrong.
Thank you so much for these amazing tutorials. If possible help us with some tutorials on the design of a staircase using Orion. Thank you am from Uganda.
Thanks a lot,, regarding the question,,If you mean that you want to check that the load applied is less than the bearing capacity of soil (that you define it),,the software will check this automatically and if there is failure it will notify you as I know..It is written below in the analysis window of raft foundation that the soil allowable stress will be amplified by factor 1.4 and check will be based on this value
Thanks Eng. the tutorial was really informative. however, I would love to know the following * Raft foundation designs * Detailing Presentations * Stairs modelling and designs thank you.
I'm extremely sorry bro,, I couldn't have the time to answer this comment and I was busy the last few months because Iam doing my master..anyway this is the link of raft foundation tutorial th-cam.com/video/NefiMWLvt_s/w-d-xo.html for the detailing you can find it in the design window of any member..and for the stairs I'm sorry I didn't try it in this software..but you can check the help menu..actually Iam not an expert in this software but I wanted to share my experience in Orion..all the best
Assalaam alaekum,please I imported my dxf file to orion but I dont know what is wrong with the scale it was bigger than the blue orion window area.when I tried to put the axes it just wont.The unit I used in autocad is mm.
Monsur Obikoya I recommend to use cm unit in Orion when you import dxf file..and no issue if the drawing is out of the blue line in orion window..but if the axis line is not generated I don't know why!! maybe you can try another drawing or change the scale of autocad dxf file..
good morning sir please i am having problems with my Columns the result never pass. It always bring this warning that Column/wall limit and minimum steel bar diameter not defined but however have defined them . please what can i do ?
During your pre-analysis select two or more sizes for reinforcemnts then proceed to column settings select your mininum and maxiimum longitudinal bars.
Dear Eng Othman, I Thanks for your great tutorial, I went through the tutorial and I have noticed some points as follows: Please how can we generate a wind load? How can we design the strip foundation on Orion? How can we enter the horizontal and inclined load??? Thanks for your comprehension in advance. Best regards.
Hello, Thank you for your comment. Sorry for my late reply, The wind load can be generated as a lateral load. Go to Building analysis button, then go to Story loads and parameters I design strap foundation using excel sheets or manual calculations
go to google and download freemake video downloader, install in your pc open freemake, go to youtube, copy video url and open freemake video downloader, click on paste and it will download into your pc.
Hi Ing., Good day Ing., your tutorial was very helpful thanks very more.But i don't know how to choose my design parameters. Hope my question will be respond to.Thanks again.
go to google and download freemake video downloader, install in your pc open freemake, go to youtube, copy video url and open freemake video downloader, click on paste and it will download into your pc.
good day sir your tutorial has really helped me so much.am from Nigeria, i will like to have more of your tutorials. thanks
Most Welcome bro,,I am glad that it helped..thanks a lot
CHLEMENCE MLIGO you can find the crack here
www.mediafire.com/folder/if2qs8aasqk4m/CSC_Orion.V.18.SP3_Standard
setup
www.mediafire.com/download/ubes7pzl61vnt95/Setup.exe
crackdownload1480.mediafire.com/efeuofnj6oqg/xr09spyi4mk3bgg/Local.csclicdb
v
just wondering if the Wall Unit Weight at 15:10 is calculated as Unit Wight of the brick [kN/m^3] * thickness of the brick (0.2m)? Because the 15.2 value is just the product of 3.8*4.0 and that Dead Load G should be = thickness of brick [m] * height of wall [m] * unit weight of brick [kN/m^3]... so I don't really get it, but correct me if I'm wrong.
This is very helpful...thanks. Pls i would want you to teach staircase design
Thank you so much for these amazing tutorials.
If possible help us with some tutorials on the design of a staircase using Orion. Thank you am from Uganda.
شكرا على الشرح الرائع ..
Thanks for this .am so grateful
the raft foundation tutorial was very informative too. Thanks for sharing.
where do we check the soil bearing capacity against the net pressure?
Thanks a lot,, regarding the question,,If you mean that you want to check that the load applied is less than the bearing capacity of soil (that you define it),,the software will check this automatically and if there is failure it will notify you as I know..It is written below in the analysis window of raft foundation that the soil allowable stress will be amplified by factor 1.4 and check will be based on this value
i can do it call me 08020392696, i stay in lagos
Can you help me how to design foundation using Pile Cap? Do you have any video tutorial for Pile cap foundation.. thank u sir
thank you, please we need full tutorials for this great software
Most welcome,, follow my channels for new videos..Thanks
Can you help me how to design foundation using Pile Cap? Do you have any video tutorial for Pile cap foundation.. thank u sir
Good for beginners......Thanks
Most welcome
Hi sir..instead of flat roof, how to consider loads if there is a roof on top of roof beam?thank you
Hello, I couldn't understand your question, can you please explain more?
Othman AlShareedah.. I mean, instead of Flat Roof,how about Trusses? How to consider load from trusses? Tq sir
Thanks Eng. the tutorial was really informative. however, I would love to know the following
* Raft foundation designs
* Detailing Presentations
* Stairs modelling and designs
thank you.
I'm extremely sorry bro,, I couldn't have the time to answer this comment and I was busy the last few months because Iam doing my master..anyway this is the link of raft foundation tutorial th-cam.com/video/NefiMWLvt_s/w-d-xo.html
for the detailing you can find it in the design window of any member..and for the stairs I'm sorry I didn't try it in this software..but you can check the help menu..actually Iam not an expert in this software but I wanted to share my experience in Orion..all the best
Can you help me how to design foundation using Pile Cap? Do you have any video tutorial for Pile cap foundation.. thank u sir
please sir, i find it difficult to import my Autocad drawing to orion.it refuses to appear after following the procedure as you said.
Hello sir this video was really informative, plz I would appreciate if u can do a video of a slab with cantilever,
Assalaam alaekum,please I imported my dxf file to orion but I dont know what is wrong with the scale it was bigger than the blue orion window area.when I tried to put the axes it just wont.The unit I used in autocad is mm.
Monsur Obikoya I recommend to use cm unit in Orion when you import dxf file..and no issue if the drawing is out of the blue line in orion window..but if the axis line is not generated I don't know why!! maybe you can try another drawing or change the scale of autocad dxf file..
+Eng Othman 9
Thank You for the tutorial. What about staircase design?
I think Orion can design staircase but usually I design the staircase manually
Can i have link for orion to download
good morning sir please i am having problems with my Columns the result never pass. It always bring this warning that Column/wall limit and minimum steel bar diameter not defined but however have defined them . please
what can i do ?
During your pre-analysis select two or more sizes for reinforcemnts
then proceed to column settings
select your mininum and maxiimum longitudinal bars.
Thanks, the tutorial is helpful. Please how can one mirror
Dear Eng Othman, I
Thanks for your great tutorial, I went through the tutorial and I have noticed some points as follows:
Please how can we generate a wind load?
How can we design the strip foundation on Orion?
How can we enter the horizontal and inclined load???
Thanks for your comprehension in advance.
Best regards.
Hello, Thank you for your comment.
Sorry for my late reply,
The wind load can be generated as a lateral load. Go to Building analysis button, then go to Story loads and parameters
I design strap foundation using excel sheets or manual calculations
Can you help me how to design foundation using Pile Cap? Do you have any video tutorial for Pile cap foundation.. thank u sir
pls sir, how can i download this particular tutorial. thanks
go to google and download freemake video downloader, install in your pc open freemake, go to youtube, copy video url and open freemake video downloader, click on paste and it will download into your pc.
sir good day how do I activate my csc orion 18?
The activation steps are there in the download link..thanks
Much appreciated.
Hi Ing.,
Good day Ing., your tutorial was very helpful thanks very more.But i don't know how to choose my design parameters. Hope my question will be respond to.Thanks again.
Anani Isaac Yao The design parameters in the building analysis window ; Pre-analysis
Thanks and sorry for late response
pls sir i need video tutorials on design of flat slab. tanks
pls Engr how can i download this video
go to google and download freemake video downloader, install in your pc open freemake, go to youtube, copy video url and open freemake video downloader, click on paste and it will download into your pc.
You said you are going to design a ribbed slab, but now you've changed it to solid slab
شكلك عراقي....
keep going
اي نعم عراقي..اشكرك عزيزي :)