Hi Dave! It's no problem at all. Thanks for providing the model number for your refrigerator. I'm going to have a look at the issue and will get back to you here once I've got a solution. Thanks for your patience. Cheers.
That was an excellent presentation. Looked at 2 other instructional videos until I found yours showing how to replace each blade and in which order. Thanks!
Hi Dave, All icemakers I have experience with have two mounting tabs that are part of the mould assembly. Normally, these have slotted openings that allow you to loosen the mounting screws and lift the icemaker up and away. Some models will have a third mounting screw beneath the body of the icemaker [used for levelling purposes], and this screw will need to be taken out before the icemaker can be removed. (Continued)
Hey Dave, thanks for your helpful videos. replaced my dryer drum belt thanks to u. Anyway I have this same ge ss refrigerator and the ice cubes in the bin is melted and stuck together which causes no ice to be dispensed.
Hi Dave! Thanks for your questions and the great detail. I'm going to take some time to look into these issues, but I wanted to acknowledge that I've received your comments. In the meantime, can you double-check your model number? They can be difficult to locate sometimes, so we have a guide on our website; from the home page, just click "Need help finding your model number?". Thanks a lot!
You are super. The video is clear, precise and you have a wonderful demeanor about you. Thanks so much. I have a GE Profile model # PSC25MSASS. The ice maker just started dripping water that forms in columns of ice down the freezer. Do I need to replace the entire ice-maker?.
you should do a video on installing a compet ice maker kit, these days all fridges only come ice maker ready,, no water line, no vales no nothing, just a hole in the back for the tubes to come though, mine is a botton frezer, it is a WP the kit cost me 159.00 cnd there is a wire plug cown at the moter, labels to remove an punch out the foam, drill marked hols for screwss
Thanks for this video! My GE stopped making ice and I have been wondering how hard it would be to replace the ice maker. I recently had to replace the mother board since all the door functions stopped working. A few months later the ice maker stopped. The green power light on the ice maker blinks when on. Could this also be a mother board issue? I don't want to buy a whole new ice maker just to find out there was nothing wrong with the old one. Thanks so much for your reply.
Hi there, sorry to hear about this problem with your ice maker. Can you provide your model number, so I'm better able to help you troubleshoot? Do you notice melted ice or frozen water droplets anywhere else in your freezer? Thanks!
the instructions I received with my new WR30X10093 ice make says you must remove the old stripper plate and use on the new ice maker. You cannot use the new stripper. I noticed that you didn't do that in the video. is it necessary? it doesn't seem like it is. thank you for any info you give.
That may be an update since we made this video, as there were no instructions to that effect at that time. I would follow the manufacturer’s instructions if you have any doubts.
Great Videos...got a GE Eterna...the water cup is frozen solid to the top so the ice unit does not make ice...do I need to unplug the refrigerator before I un-install the ice maker unit to thaw out the water cup?
I have an issue with the icemaker on my GE fridge. The water seems to just leak through when the new cycle starts. I did have to change a spring on the stopper earlier though and not sure if that's related. What do you recommend?
should water start flowing immediately. Do you have any videos on the water valve troubleshooting. I have the exact same problem. The valve is a dual valve I guess. Water comes in and then splits to the water dispenser and then the icemaker. The water comes out of dispenser so far but not for the icemaker.
hey steve I have a whialpool side by side M# ed2fhaxsq05, and my ice maker will not make ice,if i put water in it it harvests just fine but the unit will not fill the tray with water, I checked out the water valve and it doesnt seen to be sending power to open the valve(drinking water side works just fine),seems my ohms are within specs on the valve but i am out of ideas on what else to check. Can you give me some advice on what else to check??, thank you.
Hello!! Thank you for the video! I replaced the ice maker kit in the freezer but I was wondering if the water should have started as soon as the fridge was plugged back in? It was still dry inside. The arm was down as well. Does the freezer have to be a certain temp before it starts again? Thank you!
The ice maker needs to be at a low enough temperature to satisfy the thermostat before it will initiate a cycle and fill. This should happen within a few hours.
the model number is GSH25JSTASS. well for the past few months i've switched off the the icemaker but i did notice some frozen droplets at the outside bottom of the ice bin. i also have another recent problem with this refrigerator, two months ago chiller side got warm so i opened the inside panel in the freezer and the coils was covered ice. i allowed it to thaw which temporarily fixed the problem. i did this again last week. do i need to replace the thermostat or heater or main board? thanks.
My ice maker just stopped working. I see that the tube in the back that feeds the water in is frozen solid. Does this mean the unit needs to be replaced or just thawed out?
(Continued from previous comment) The parts diagram for this model shows a rear mounted icemaker, but it would seem your unit has left wall mounting. This style usually has the standard two mounting screws in slotted tabs attached to the mould. If you need further assistance, can you provide a couple of photos? I'll send you a message with my e-mail address for this purpose.
Hi, can you direct me to a video that would enable me to replace JUST the Ice Crusher Housing on a GE Profile Arctica Side by Side Freezer? Model #PSS25SGMDBS; purchased in 2002. There is water freezing in the forward part of the tray and housing.
Gildon Stillings We are still trying to get out videos for all our parts. Unfortunately, at this time we do not have a video for this specific repair. If you need further assistance our customer service team and answer any questions you have. Our toll-free number is 1-888-895-1535
Could very well be, Warren. Although there are various other elements of the ice maker kit you might want to check before going with the full replacement, if you're looking to save dollars. Head over to our repair page where we've addressed the common symptoms of faulty ice makers, which includes completely replacing the part, but also checking things like the water inlet valve, water fill tubes, and ice and water filler. www.partselect.com/Repair/Refrigerator/Not-Making-Ice/ Have a browse and see if you can isolate the problem with your particular model. Let us know if we can be of any more assistance. Thanks for getting in touch.
I have replaced my icemaker and the first issue I had was the water would overfill the unit and lets say double of what it should be. On this I do not know how to fix this setting. My model is the same as above with the On off switch. I have seen another video where it says that after installation to switch on the unit and Move the Paddle back and fourth THREE times to initialize the maker, well this did not fix the problem. Next the cover when removed shows a screw with a + and - direction that I guess represents the pressure on the rotating unit for the ice cubes, or how much water is needed to fill the ice bin. The problem is there are no instruction that cover these issues. I hope someone can help me out with this issue. At this time the ice maker makes ice, but takes too long to turn the cubes out. Now after I messed with the adjustment screw it does nothing yet.
+Rational Reality American The + and - indicates the direction to turn that screw for adjusting the water fill time. Normally about 7-9 seconds is the range in which you will get a proper fill.
Thank you so much for putting together this video. Just finished replacing my ice maker and this video made it so easy. My wife thinks I’m a god now.
Hi Dave! It's no problem at all. Thanks for providing the model number for your refrigerator. I'm going to have a look at the issue and will get back to you here once I've got a solution. Thanks for your patience. Cheers.
That was an excellent presentation. Looked at 2 other instructional videos until I found yours showing how to replace each blade and in which order. Thanks!
Hi Dave,
All icemakers I have experience with have two mounting tabs that are part of the mould assembly. Normally, these have slotted openings that allow you to loosen the mounting screws and lift the icemaker up and away. Some models will have a third mounting screw beneath the body of the icemaker [used for levelling purposes], and this screw will need to be taken out before the icemaker can be removed. (Continued)
Hey Dave, thanks for your helpful videos. replaced my dryer drum belt thanks to u. Anyway I have this same ge ss refrigerator and the ice cubes in the bin is melted and stuck together which causes no ice to be dispensed.
Hi Dave!
Thanks for your questions and the great detail. I'm going to take some time to look into these issues, but I wanted to acknowledge that I've received your comments. In the meantime, can you double-check your model number? They can be difficult to locate sometimes, so we have a guide on our website; from the home page, just click "Need help finding your model number?". Thanks a lot!
Thank you very much
You are super. The video is clear, precise and you have a wonderful demeanor about you. Thanks so much. I have a GE Profile model # PSC25MSASS. The ice maker just started dripping water that forms in columns of ice down the freezer. Do I need to replace the entire ice-maker?.
I have a CX20E Kenmore fridge. Do they still make ice makers for it?
you should do a video on installing a compet ice maker kit, these days all fridges only come ice maker ready,, no water line, no vales no nothing, just a hole in the back for the tubes to come though, mine is a botton frezer, it is a WP the kit cost me 159.00 cnd there is a wire plug cown at the moter, labels to remove an punch out the foam, drill marked hols for screwss
Thanks for this video! My GE stopped making ice and I have been wondering how hard it would be to replace the ice maker. I recently had to replace the mother board since all the door functions stopped working. A few months later the ice maker stopped. The green power light on the ice maker blinks when on. Could this also be a mother board issue? I don't want to buy a whole new ice maker just to find out there was nothing wrong with the old one. Thanks so much for your reply.
Really good job
Hi there, sorry to hear about this problem with your ice maker. Can you provide your model number, so I'm better able to help you troubleshoot? Do you notice melted ice or frozen water droplets anywhere else in your freezer? Thanks!
the instructions I received with my new WR30X10093 ice make says you must remove the old stripper plate and use on the new ice maker. You cannot use the new stripper. I noticed that you didn't do that in the video. is it necessary? it doesn't seem like it is. thank you for any info you give.
***** I will pass your question on to Steve and let you know what he suggests.
That may be an update since we made this video, as there were no instructions to that effect at that time. I would follow the manufacturer’s instructions if you have any doubts.
Es.ilustrativo.pueda.decirme.donde.vuscar.el.filtro.en.mi.viejo.refrijedador
Great Videos...got a GE Eterna...the water cup is frozen solid to the top so the ice unit does not make ice...do I need to unplug the refrigerator before I un-install the ice maker unit to thaw out the water cup?
Gregory Miyata Yes. I would recommend thawing the water cup before the repair.
I have an issue with the icemaker on my GE fridge. The water seems to just leak through when the new cycle starts. I did have to change a spring on the stopper earlier though and not sure if that's related. What do you recommend?
hola ,buen video no tienes version en español ???
Question my ice maker is wr30x10012 is this is the same wr30x10093? Or is compatible? Thanks
should water start flowing immediately. Do you have any videos on the water valve troubleshooting. I have the exact same problem. The valve is a dual valve I guess. Water comes in and then splits to the water dispenser and then the icemaker. The water comes out of dispenser so far but not for the icemaker.
our icemaker hasn't worked for years. It seems like the water would overflow and then freeze over. Any suggestions?
I'm changing the ice maker for that reason. Easy fix but let's see last. GE ice may suck. A lot of complaints.
hey steve I have a whialpool side by side M# ed2fhaxsq05, and my ice maker will not make ice,if i put water in it it harvests just fine but the unit will not fill the tray with water, I checked out the water valve and it doesnt seen to be sending power to open the valve(drinking water side works just fine),seems my ohms are within specs on the valve but i am out of ideas on what else to check. Can you give me some advice on what else to check??, thank you.
Hello!! Thank you for the video! I replaced the ice maker kit in the freezer but I was wondering if the water should have started as soon as the fridge was plugged back in? It was still dry inside. The arm was down as well. Does the freezer have to be a certain temp before it starts again? Thank you!
JoAnn Shuping I passed your question on to Steve and will let you know what he suggests.
The ice maker needs to be at a low enough temperature to satisfy the thermostat before it will initiate a cycle and fill. This should happen within a few hours.
the model number is GSH25JSTASS. well for the past few months i've switched off the the icemaker but i did notice some frozen droplets at the outside bottom of the ice bin. i also have another recent problem with this refrigerator, two months ago chiller side got warm so i opened the inside panel in the freezer and the coils was covered ice. i allowed it to thaw which temporarily fixed the problem. i did this again last week. do i need to replace the thermostat or heater or main board? thanks.
Thank you Steve!! :))
My ice maker just stopped working. I see that the tube in the back that feeds the water in is frozen solid. Does this mean the unit needs to be replaced or just thawed out?
I instill a replacement ice maker GE model GSL25JFXNLB serial number FT214629. Yesterday I instilled the replacement ice maker. There still no ice
What should I do?
What happened after you replaced it and it freeze up and makes a loud noise what causes this
My water dispenser nozzle is frozen. I can't find any instructions for repairing it. Its the Whirlpool In-door Ice dispensing side by side.
(Continued from previous comment)
The parts diagram for this model shows a rear mounted icemaker, but it would seem your unit has left wall mounting. This style usually has the standard two mounting screws in slotted tabs attached to the mould. If you need further assistance, can you provide a couple of photos? I'll send you a message with my e-mail address for this purpose.
Hi, can you direct me to a video that would enable me to replace JUST the Ice Crusher Housing on a GE Profile Arctica Side by Side Freezer? Model #PSS25SGMDBS; purchased in 2002. There is water freezing in the forward part of the tray and housing.
Gildon Stillings We are still trying to get out videos for all our parts. Unfortunately, at this time we do not have a video for this specific repair. If you need further assistance our customer service team and answer any questions you have. Our toll-free number is 1-888-895-1535
We bought ours used and the ice maker never filled with water. Does this sound like a fix for my problem?
Could very well be, Warren. Although there are various other elements of the ice maker kit you might want to check before going with the full replacement, if you're looking to save dollars. Head over to our repair page where we've addressed the common symptoms of faulty ice makers, which includes completely replacing the part, but also checking things like the water inlet valve, water fill tubes, and ice and water filler. www.partselect.com/Repair/Refrigerator/Not-Making-Ice/ Have a browse and see if you can isolate the problem with your particular model. Let us know if we can be of any more assistance. Thanks for getting in touch.
yo tengo una nevera samsung el dispensador de hielo no voltea la bandeja para descargar el hielo ya hecho...que puede estar pasando? gracias
Oh I tried the diagnostics and it did not respond at all.
I have replaced my icemaker and the first issue I had was the water would overfill the unit and lets say double of what it should be. On this I do not know how to fix this setting. My model is the same as above with the On off switch.
I have seen another video where it says that after installation to switch on the unit and Move the Paddle back and fourth THREE times to initialize the maker, well this did not fix the problem.
Next the cover when removed shows a screw with a + and - direction that I guess represents the pressure on the rotating unit for the ice cubes, or how much water is needed to fill the ice bin. The problem is there are no instruction that cover these issues.
I hope someone can help me out with this issue. At this time the ice maker makes ice, but takes too long to turn the cubes out. Now after I messed with the adjustment screw it does nothing yet.
+Rational Reality American The + and - indicates the direction to turn that screw for adjusting the water fill time. Normally about 7-9 seconds is the range in which you will get a proper fill.
Mine is leaking water into ice bucket.
my icemaker is making ice and freezer is working. however I have an accumulation of water in bottom of refrigerator
What model number do you have?
it is part # 94104
Hoi lol