HOW TO - Fitting DCC sockets to Locomotives
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2025
- www.illuminated...
This video explains how easy it is to fit our decoder sockets to a locomotive. this is part one showing how to fit our products. The model shown is a hornby/mainline class 56. In using these once they are fitted, you don't have to solder and re-solder the joints if you want to change decoders its just a case of pull out and push in.
To purchase them
www.illuminated...
AL-07 8 Pin DCC Socket
AL-15 8 Pin DCC Screw terminal
AL-18 8 Pin DCC Socket Compact.
Good video 📹👍, I have 2 of these to do. So this has been a great help. Cheers 🍻
Just come across your channel is it better to fit these sockets first instead of just wiring a decoder in. I noticed that you took the old wires out, could you not just join an extension to them. I've just started with a layout and have a few diesels to convert to dcc
HOWARD POMFRET we recommend these sockets as it dosent void the decoders Warrenty. Also it enable you to exchange decoders down the line if you want to upgrade to sound decoders and bits like that. Yes, you could simply join extensions of existing wires. We replaced just to make the colour coding easier. Hope this helps.
@@illuminatedmodels5262
thanks for your reply
I'm putting a speaker in the tender of a lord nelson on removing the rear bogies I've broke a very thin wire 1 of 2 underneath can you tell me what sort of wire do I need it's not very long but very thin thanks you make things look so simple
hi can you fit this to the class 37 lima im sure there are only 3 wires for the motor left and roght not 4 thank you
Hi we're do you buy your dcc sockets from
Bob
What size wire is the green and yellow? Is this the same 16/0.2 used in droppers or would it be more 7/0.2?
James K Junction looking at the data sheets the 7/0.2. It has a rating of 1.4 amps which would be fine to connect to the motor to the board
Difficult to observe without some close up shots
Good content, but the area of interest covers only 10% of the screen. Closer camera work would make it a much better video