Of course we liked the video! We empathize with you. It almost always takes longer than you think it will to get something done. At first I seriously thought it was just me, because most other TH-cam videos make it seem like fabrication is so quick and something like what you did should only take two hours instead of five or six. One of the things I appreciate most, is I can relate to your realness in being humble and letting us know that fab work takes time. Granted some people are way quicker because of all the experience, but some things just take time. I would rather it take way longer and do it myself and have those memories than paying someone else. Just my .02. Appreciate you.
Some times shit goes smooth and others not so much. Today kicked me ass, not this filler but what I’m working on. It’s part of it. I appreciate your kind words. Thanks you.
Doing a rustoration on an 84 F250. Building a wood bed and find myself in the same situation with trying to flatten out an angled mounted neck from a later model truck (mine was rusted out and too short to reach where I needed it to go). Luckily the vent tube is inside the filler tube on mine and the donor. I had planned to remove and reattach themount ring at the angle I need and now I see that it should work.
Why didn't you put the filler pipe for the fuel tank on the driver's side mate James from western Australia love you shows waiting for my car to be painted then I can get into it
Great work Great explanations Have you tried using chemicals to create your patina instead of paint? Ive used combination murcacid toilet bowel cleaner And wet down the new metal. It rusted up in a few days almost like the side of your travel all. I looked up the recipe on utube lol
![[LIVE] : ONE ลุมพินี 72 วันนี้!! คู่เอก "ก้องศึก vs โจอาคิม"](http://i.ytimg.com/vi/hT1EOSsRPac/mqdefault.jpg)
![มองหน้ากันไม่ติด (Awkward) - โอ๊ต ปราโมทย์ FEAT. MAIYARAP [Official MV]](http://i.ytimg.com/vi/4b02SY_r6Gw/mqdefault.jpg)
Love the rust “touch up”, also know what it’s like to work while injured, it’s hard to stay with it.
Ya working in the back is the worst area to work with it too.
Nice work. Good to see that you take your time & work through the small items , using detail to accomplish a well thought out project.
Stay Real
I'm still sitting on my ass watching your complete build on your travelall awesome build
Watching TH-cam videos makes money for Puddin. So even though sitting on your ass won’t finish your project, it will help Puddin finish his project.
Watched again ! This was a great build ! That guy i miss!!
NICE VIDEO. AN EXCELLENT WELDING TUTORIAL.
Very nice work,your fab work is second to none,THANK YOU for sharing
Great job. Enjoying the travelall build
Great job! I love this channel! Keep up the great work
👊🏻👊🏻
Your videos deserve way more subscribers and views for sure 👏👏👏 you sir have better real content than any fake TV show God bless....
Love how you see it and then do it
As always,you’re doing a great job knocking out these small projects.
Thanks!
No sand fill it with water and freeze it. You're an engineer and I'm blowing out my arse. Be well and stay safe.
Great work as usual, all the best
Excellent as always!
Thank you!👊🏻
great result. nice to see the grinder fire shirt is back in rotation 😊 👍👍
I love that shirt !
Great job. It's turned out looking good 👍👍👍👍🇨🇱
Thanks Shane! 👍🏻👍🏻👍🏻👊🏻
Great job. Enjoy the work you are doing.
I ha k you for watching.
Nice work!!!
Lots of work. It’s going to be cool
Very nice work.
puddin it is looking real good. fab on. weld on. god bless.
Excellent job!
Thank you!
I like how the cap blended in the body, I was wondering how you were going to finish it, originally thought you would prime it, like the patina look!!
Trying to make it looks like it belongs.
You are a true fabricator
Another good one
Friggin Awesome
Of course we liked the video! We empathize with you. It almost always takes longer than you think it will to get something done. At first I seriously thought it was just me, because most other TH-cam videos make it seem like fabrication is so quick and something like what you did should only take two hours instead of five or six.
One of the things I appreciate most, is I can relate to your realness in being humble and letting us know that fab work takes time. Granted some people are way quicker because of all the experience, but some things just take time.
I would rather it take way longer and do it myself and have those memories than paying someone else. Just my .02.
Appreciate you.
Some times shit goes smooth and others not so much. Today kicked me ass, not this filler but what I’m working on. It’s part of it. I appreciate your kind words. Thanks you.
@@PuddinsFabShop the important thing is that you are putting in the time to make your dream a reality. A bit at a time. :)
Another great job keep them coming
I’ll try!
Great job
Love it.
Good job making it work!
Thanks! It was a pain lol
Nice job.
Doing a rustoration on an 84 F250. Building a wood bed and find myself in the same situation with trying to flatten out an angled mounted neck from a later model truck (mine was rusted out and too short to reach where I needed it to go). Luckily the vent tube is inside the filler tube on mine and the donor. I had planned to remove and reattach themount ring at the angle I need and now I see that it should work.
Heck ya
Looks good
Looks good !!
Thanks peter
well done. Where are you going to put your spare tire?
Good work man!
Thanks Rob!
Back watching
👊🏻👊🏻
Creative.
Alot of work, but what a great job!
Thank you!
Cheers for that
👊🏻👊🏻
Nice Job
Thank you
👍
This was back in the day when the New Balances did their own talking.
Dang what a pain in the ass. I can't believe International made it so complicated. It looks like you got it squared away though
This was a good one. Btw is that an old Wilton vise?
It is!!
Like the intro
👊🏻👊🏻👊🏻
Why didn't you put the filler pipe for the fuel tank on the driver's side mate James from western Australia love you shows waiting for my car to be painted then I can get into it
Fit better for the passenger side
did you run the vent hose over or through the frame? thanks for sharing your skills
It will be yes. Thanks for watching!
Great work
Great explanations
Have you tried using chemicals to create your patina instead of paint? Ive used combination murcacid toilet bowel cleaner
And wet down the new metal. It rusted up in a few days almost like the side of your travel all. I looked up the recipe on utube lol
I’ve peed on stuff before to make it rust. Does that count? 😂😂
Was that shirt involved in another fire!!!
Like it was always there! Lot of screwing around but that's what it takes sometimes ...
A little getting after it, head scratching, and tinkering to get there.
disco boot...never caught on in Louisiana
Giod work...man.....Keep at it.....Brother Grindn and shinning..........SMASH SMASH SMASH THAT THUMBS UP👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank you!!
Nice job. Looks like your not far from taking a ride.
Getting closer!
Jacob is the filler neck already attacked to the inlet of the fuel tank? Or that is still pending?
Is attached. That piece of rubber connects between the filler and the inlet of the tank.
What vehicle is that out of?
I believe a 94 or 96 f150 or f250. I don’t remember honestly. I do think I say it at some point in the video.
Nice frame mod
👊🏻👊🏻
Now where will you put the spare tire?! lol
I won’t carry one unless I’m on a road trip
@@PuddinsFabShop Is there a reason to sacrifice the spare wheel space?
You're going to pull the body? Why?
Weld up a couple things, box the frame, paint the frame and the bottom of the body.
@@PuddinsFabShop yeah I guess that would make sense.
Just want it clean under there.
@@PuddinsFabShop dont cut this corner doing a great job on her!!
You're gonna have a hole in your spare tire.
Need one anyhow!
👍