With these Tweaks you can boost your AMD Ryzen 5 5600G upto 4.6Ghz even on a stock cooler, Few things you can apply/try for max performance; 1. You can try PBO scalar options, if your boost clock is dropping frequently (helpful with stock cooler) 2. RAM OC and Tighter Timings are very helpful in pushing max frames specially with the Radeon Vega iGPU. 3. If you are using only iGPU, allocating Fixed amount of VRAM helps those 1% lows. I hope you liked this vid, go try these settings out on your 5600G :)
I really like people who say: I overclocked the processor, memory and video core and nothing has changed, don’t overclock! (at the same time they leave the built-in video card with 512 megabytes)
if it's an AMD APU, leaving like this is no problem, bcause they have a "tecnology" that auto-alocates vram according to the remaining ram available. it's a mobo feature for amd supported mother boards, so your windows task manager continues to show you that your igpu only have 512mb, but its not like that
Thank you very much. You have the best video on the 5600g out there. You cover pretty much everything all in one video. My cpu definitely is not as good as yours. Only managed to squeeze out -19/-18 per core. And with my 3200mhz ram your stock performance in gta is better than my oc. Definitely gonna subscribe and check out your other videos.
From the bottom of my heart, I love you, just built my new pc with rx 6700xt and r5 5600 and this was very helpful. Want to see how far the 5600 can be pushed and ram overclocking videos next.❤
i really like this overclocking, been using it for months. recently bought a better cooler, even at 100% cpu utilization it stays at 60 to 70*celcius. do you have plans on making a new vid for those who want stronger overlock?
My advice from personal experience instead of overclocking just turn off core boost and run processor on base frequency even on 100 percent load with wrath cooler u will be able to play games at very decent fps under 70 degree temperature in the finals my temperature was rising upto 89 degree and cpu was throtlingbits performance increasing lags and fps to even 20 and 30 fps after running cpu at base my temperature is 65 to 68 with 50 fps and even touch 60 many times this will work for those who are playing games on vega graphics only and dont have external gpu
@@IneffableBenchmarks I see where he comes from, here in Brazil since it is hot it can cause this thermal throtling but if you leave in a cold place or an AC on at all times overclocking is the best (as long you control temperature!)
If I'm correct, you undervolt the cpu then overclock the igpu right? You also need to tell that you need to test a lot for stability and i stability issues for this to work in the long run. Also not all values in pbo will apply to all 5600g because of silicon lottery.
correct, and m using these settings for more then 3 months now i have done a lot of stability testing. the PBO+CO values are solid stable but yes there is a little bit of luck involved if someone wants to copy 100% of the value.
@@IneffableBenchmarks i tried to undervolt my cpu but i can't get it to work on high negative values. The result is not that great for me so I just stick with stock. But I guess you have a better 5600g than mine.
@@IneffableBenchmarks why does whenever I enable pbo on my asus prime b450m a-ii mobo it doesn't change anything from auto? I test with cinebenchr23 btw.
well... it's probably a physical problem.. check if you removed the protection plastic off of your cooler, verify the thermal paste as well (ryzen processors usually has pre-applied thermal paste, but idk, sometimes things just go wrong, try replacing it, thermal paste is usually cheap as you don't need the best for this processor).. also this cpu has a low TDP, its normal average operation temperature would not reach 65 degrees (Celsius ºC), there's something wrong with your cooler, for sure. if it didn't work.. try a technician, or do an undervolt on the cpu cores like its shown in the video, undervolt and raise the frequency to compensate it, lower temperatures with the same or higher overall performance
@@chickenmcnugget005 on low TDP processors, not really. I use a r5 5600g overclocked with the stock cooler and it has never reached more than 70°C, just don't push things too much, if you're in doubt, just google how to safely overclock your processor, I'm sure theres plenty of tutorials out there for your needs
@@iceberg789 actually I live in Brazil, average temperatures here in summer reach 37ºC. and yet, my overclocked r5 5600g always under 68°C. probably the 3 intake and 1 outake cabinet fans keeping an steady air flow is helping, bcause I never changed my stock cooler tho..
thanks for your video, this helped me increase my cinebench score by almost 10% from stock cpu settings. My CPU is still fairly cool sitting around 55 degress C. I think i can get more out of my CPU and looking for a more aggressive OC what would you recommend?
usually what damagea your cpu is the temperature, if you manage to keep it under idk.. 70 degrees Celsius, everything is ok. but you need to see if it will be stable as well, high overclocks usually get you some blue screens or random crashes
I am facing crash in my pc after using all of your settings,i tried these settings so many times but pc shutdowns as soon as it boots to lock screen. My motherboard is MSI B550 Gaming Edge WiFi.Please help bro
@@iceberg789 thanks i already did it from amd ryzen master from 4.2ghz boosted at 4.5 it can do more like 4.6 or 4.7 but I don't have cooler and plus that much power supply
on gfx voltage 2:00 when i type 1300 and then press enter. it automatically converts to 0.00625V. is that normal? fir now i set it to auto since i'm not sure
The CPU overclocking thing also works on the Ryzen 5 5600 (the one without iGPU) and thanks to you, my boost clock is now 4.6GHz. (It was 4.4GHz before OC) My system is currently working completely fine but the more you overclock, the higher the CPU's temp. However, I have one question: Is it possible to OC from 4.4GHz to 4.9GHz instead of 4.6GHz?
yup, i recently got my hands on the ryzen 5600 non-x version and i am currently working on OCing it to it limits.i have managed to get around 4.8Ghz all core on 5600, but i like to test it further for stability before i release any guide for it.
Hey, I copied your setup with the stock cooler as well. It's idling at 37°C, but under load, it goes over 80°C and sometimes hits 91°C! While gaming using the iGPU, it maxes out at 75°C. Do you have any tweak recommendations, or is this normal?
with my settings if the cpu load increase and the temp reaches above 70C, you will notice that freq will start droping from 4.6Ghz, with any after market cooler that's not the case.
Tried it out with deepcool ak400 and it works! 42C standby and 60c under load ( using dedicated GPU ) If ever I wanna try adding 50mhz more so that it will be 4.7 is it fine with the curve settings you used? @@IneffableBenchmarks
Bro now my pc is restarting automatically randomly. I did the same steps in the video as you said so what should I do? (Note : sometimes auto restarts while in game and also sometimes it doesen't@@IneffableBenchmarks
@@IneffableBenchmarksalso the performance did significantly increase after your OC guide in this vid and it had no issues like crashes or anything else while stress testing it (I used CINEBENCH R23)
Damn man! The only vid that worked for me to overclock it! I got an RTX 3070 and the 5600G and now it is not limited anymore on 4.2. It gets to 4.6 GHZ and its great! Works much better! I have an 850 wats power supply! Is it any other Overclock I can do to get a little extra fps without doing anything wrong? I have 32 gb of ram at 3066HZ. Please let me know if there is any other better and stable!!
Частоту оперативки бы побольше, либо ты опечатался указав 3066. Сейчас условный минимум это 3200, но 3600 или даже 4200 будут гораздо лучше работать. У красных камней есть некая привязка частоты ядер и частоты оперативки - есть в сети инструкции и даже программы рассчёта для этого А вот блок питания у тебя даже избыточен для этой системы, но главное, что его достаточно с запасом
@@iemstanmayabehera645 I think I'm better off just replacing it with the non x variant and add a a380 or something like that since they come pretty cheap So I think I'll just start saving for that Still 70° seems quite a lot Won't it affect the lifetime of the CPU?
Not sure but most of the people suggest that you can overclock until the temp reaches 70,its your call man. Your cpu, your pc, now I just applied this video's bios settings and my god of war 3 performance increased by almost 10fps.i have a r5 5600g, 16gb ddr4 ram, rtx 2060s ,500gb nvme m.2 ssd, toshiba 2tb hdd
I did all of that, it seems to have worked as my CPU is now hitting that 4.6hz but when I go on MSI afterburner it's saying my GPU is only 400Mhz and Memory is 1600Mhz? 😂
i tried the exact same settings then stress tested it using heaven benchmark the cpu speed can only reach max 4100mhz while the gpu speed cant be shown and the temp is reaching 90°.any solutions?
Use a real benchmark not heaven something like prime95 and reset all of your bios settings and check temps. Apart from that check that your cooler is mounted correctly and check if the fan spins. Check your bios and the temps at idle, if they're above 50 something's wrong unless you live in a really hot environment.
Do you have any reasons for why my 5600g constantly has driver timeouts when playing games or just turning on? It literally kicks me out of games so I can’t even play
Leaving this incase if i forgot the date 20-4-2024 I overclocked as per video And still the evening after doing the mess My pc is running don't know how long it will not show any problems And I don't feel any major performance change it is same ya for now temperature is controlled or stable but don't know about future anyway it was fun experience Let's see what will happen
@@IneffableBenchmarks ya but it doesn't have any big difference just the completion became first but It was good bcz i didn't touch volt settings so it's ok But I didn't understand the fps u get and I get are very different my fps are unstable up and down not a constant range it can go to 30 to 100 And one more thing I don't know if this problem with me or anybody else My fps comes more in medium if i play on all low 720p then fps are unstable but if i play in low medium 720p or 900p low medium it runs smooth and High fps like yours So pls reply
Any problem to now overclock the processor and add on gpu later on it like 7-8 months later add a gpu Will overclocking the processor cause any problems with the GPU?
probably a problem with your mother board battery. unplug it, clean the contacts and plug it again, then try to save the settings.. if the battery is not well-plugged, the mobo cant save the setrings. thats why removing the batery for a few seconds resets the bios
Bro after applying your oc my cpu temps is around 85-90 degrees and cpu does not reach over 4Ghz and sometimes my pc restarts randomly. How do I fix this ?
Please bro make a video about msi motherboard, i tried your settings so many times but it occurrs blue screen. Please help bro. My motherboard is MSI b550 gaming edge WiFi
Is it normal that after igpu OC the gpu clock always stays on 2300mhz, even on desktop when there is no load. When there is no OC set, the clock goes down to 400mhz after couple of seconds with no load. Is there any fix for that, and is it bad for the gpu?
With these Tweaks you can boost your AMD Ryzen 5 5600G upto 4.6Ghz even on a stock cooler,
Few things you can apply/try for max performance;
1. You can try PBO scalar options, if your boost clock is dropping frequently (helpful with stock cooler)
2. RAM OC and Tighter Timings are very helpful in pushing max frames specially with the Radeon Vega iGPU.
3. If you are using only iGPU, allocating Fixed amount of VRAM helps those 1% lows.
I hope you liked this vid, go try these settings out on your 5600G :)
PBO Scalar Best settings ???
Does your settings work on 4650G?
@@LuckyYeti Don't know
@@LuckyYeti mine is Ryzen 5 5600g
hey how much should i set pbo scalar for stock cooler bro? please reply
I really like people who say: I overclocked the processor, memory and video core and nothing has changed, don’t overclock! (at the same time they leave the built-in video card with 512 megabytes)
if it's an AMD APU, leaving like this is no problem, bcause they have a "tecnology" that auto-alocates vram according to the remaining ram available. it's a mobo feature for amd supported mother boards, so your windows task manager continues to show you that your igpu only have 512mb, but its not like that
If ur using the integrated graphics, youll get the biggest change in fps with ram speeds. Cpu overclock wont really change much.
Thank you very much. You have the best video on the 5600g out there. You cover pretty much everything all in one video. My cpu definitely is not as good as yours. Only managed to squeeze out -19/-18 per core. And with my 3200mhz ram your stock performance in gta is better than my oc.
Definitely gonna subscribe and check out your other videos.
From the bottom of my heart, I love you, just built my new pc with rx 6700xt and r5 5600 and this was very helpful. Want to see how far the 5600 can be pushed and ram overclocking videos next.❤
Glad I could help!
i am currently testing 5600 and 5600x might release a BIOS optimize guide
@@IneffableBenchmarks im using 5600x now, can make a video with that processor? thank u so much!
Bro in my advanced section amd ovecloking not showing i have same motherboar
Worked. Thanks 👍
Dear, thank you so much for that help. 1+ Subscribed. You are AWESOME! My Onboard 5600G are flying right now and very fluid.
Thanks 😊
ur welcome,
Thank you❤ my 5600g running on 4.65ghz
Thanks bro 😎
Any time
Best guide special thanks❤
Glad it helped!
For me there is no amd overclock menu
really helpful vid
❤
thanks, did you got the performance jump?
It works thanks
awesome
Will this harm the PC?
@@Deepak_singh079 you need a good cpu cooler.
i really like this overclocking, been using it for months. recently bought a better cooler, even at 100% cpu utilization it stays at 60 to 70*celcius. do you have plans on making a new vid for those who want stronger overlock?
yes i am working on it
thats nice to hear
How come for me my bios doesn’t have the and overclock thing? How do I turn it in?
check if your cpu supports overclocking first.
My pc has blank not enter to bios or windows after doing this -_-
How i solve this error bro?
Like a not connect to monitor, just blank
reset bios by removing cmos battery
I made the exact steps but the gpu mem is still 1600mh
What is missing here?
What was the Difference in Fan Noise before and After ?
Fan becomes Jet Engine and says I'm death now.
lol but not much cant hear it outside of the cabinet
what did you do in gfx curve optimize? 1:34 was it just a miclick, and should it stay disabled?
It was disabled
Which cooler Are you using ?
amd stock
My advice from personal experience instead of overclocking just turn off core boost and run processor on base frequency even on 100 percent load with wrath cooler u will be able to play games at very decent fps under 70 degree temperature in the finals my temperature was rising upto 89 degree and cpu was throtlingbits performance increasing lags and fps to even 20 and 30 fps after running cpu at base my temperature is 65 to 68 with 50 fps and even touch 60 many times this will work for those who are playing games on vega graphics only and dont have external gpu
okay got your point, will try it myself lets see how it perform on base.
@@IneffableBenchmarks I see where he comes from, here in Brazil since it is hot it can cause this thermal throtling but if you leave in a cold place or an AC on at all times overclocking is the best (as long you control temperature!)
how to do this on gigabyte aorus elite b550m?
If I'm correct, you undervolt the cpu then overclock the igpu right? You also need to tell that you need to test a lot for stability and i stability issues for this to work in the long run. Also not all values in pbo will apply to all 5600g because of silicon lottery.
correct, and m using these settings for more then 3 months now i have done a lot of stability testing. the PBO+CO values are solid stable but yes there is a little bit of luck involved if someone wants to copy 100% of the value.
@@IneffableBenchmarks i tried to undervolt my cpu but i can't get it to work on high negative values. The result is not that great for me so I just stick with stock. But I guess you have a better 5600g than mine.
@@zilverman7820silicon luck man
@@zilverman7820my 5600G can work easily with negative 30 offset on all cores
@@IneffableBenchmarks why does whenever I enable pbo on my asus prime b450m a-ii mobo it doesn't change anything from auto? I test with cinebenchr23 btw.
i am using the ryzen 5 5600gt with integrated graphics and cpu temp goes up to 80`C on stock settings while playing gta 5 what should i do?
well... it's probably a physical problem.. check if you removed the protection plastic off of your cooler, verify the thermal paste as well (ryzen processors usually has pre-applied thermal paste, but idk, sometimes things just go wrong, try replacing it, thermal paste is usually cheap as you don't need the best for this processor).. also this cpu has a low TDP, its normal average operation temperature would not reach 65 degrees (Celsius ºC), there's something wrong with your cooler, for sure.
if it didn't work.. try a technician, or do an undervolt on the cpu cores like its shown in the video, undervolt and raise the frequency to compensate it, lower temperatures with the same or higher overall performance
@@marvin3942 do you need a good cpu cooler to overclock the processor?
@@chickenmcnugget005 on low TDP processors, not really. I use a r5 5600g overclocked with the stock cooler and it has never reached more than 70°C, just don't push things too much, if you're in doubt, just google how to safely overclock your processor, I'm sure theres plenty of tutorials out there for your needs
@@marvin3942 you are probably in one of those cold countries.
you need a good cooler if ambient is 35-38 degrees.
@@iceberg789 actually I live in Brazil, average temperatures here in summer reach 37ºC. and yet, my overclocked r5 5600g always under 68°C. probably the 3 intake and 1 outake cabinet fans keeping an steady air flow is helping, bcause I never changed my stock cooler tho..
thanks for your video, this helped me increase my cinebench score by almost 10% from stock cpu settings. My CPU is still fairly cool sitting around 55 degress C. I think i can get more out of my CPU and looking for a more aggressive OC what would you recommend?
4.6ghz is max with pbo settings, you can manual oc though, i have reached 4.8ghz all core with manual oc, but there is not much gains in gaming.
I don't have the UMA setting.
the uma is for APU procie only
Thanks
A question, how your GPU MEM CLK achieves 1800Mhz?
overclocking is it reach amd 5600x speed or amd 5600 or low??
hey , does these settings damage your cpu over time ? (btw great video)
Only if your temps are too high
@@alfonso5177 thx man
usually what damagea your cpu is the temperature, if you manage to keep it under idk.. 70 degrees Celsius, everything is ok. but you need to see if it will be stable as well, high overclocks usually get you some blue screens or random crashes
I am facing crash in my pc after using all of your settings,i tried these settings so many times but pc shutdowns as soon as it boots to lock screen. My motherboard is MSI B550 Gaming Edge WiFi.Please help bro
And i guess i need to disable Global C -State Control to work as far as i know. Am I right bro ??
my manual igpu overclocking cannot saving the setting, how to fix it? :( . my mobo is gigabyte b550 ds3h
Same but my mobonis b450
Did you fix it?
Can i try same overclock on asus prime b450m-a
b450 capability is limited. but you can check bios options.
@@iceberg789 thanks i already did it from amd ryzen master from 4.2ghz boosted at 4.5 it can do more like 4.6 or 4.7 but I don't have cooler and plus that much power supply
@@GioYruashvili-w7y good. how much did you boost the iGpu, at the point it's stabe ?
Iam using r5 5600g and rtx 2060 i disabled i gpu and want to oc only cpu and this is possible but is it good if i have good cou coller can i oc ?
If you have after market purchased cooler not stock cooler you can
on gfx voltage 2:00 when i type 1300 and then press enter. it automatically converts to 0.00625V. is that normal? fir now i set it to auto since i'm not sure
put 1.3
my pc randomly restarts for no reason, what seems to be the issue and how couyld i fix it?
@@dskgaming2582
thank you
@@dskgaming2582
Hey bro please reply
Whats the core voltage?????
dont change any voltage settings, leave them to auto
The CPU overclocking thing also works on the Ryzen 5 5600 (the one without iGPU) and thanks to you, my boost clock is now 4.6GHz. (It was 4.4GHz before OC) My system is currently working completely fine but the more you overclock, the higher the CPU's temp.
However, I have one question: Is it possible to OC from 4.4GHz to 4.9GHz instead of 4.6GHz?
yup, i recently got my hands on the ryzen 5600 non-x version and i am currently working on OCing it to it limits.i have managed to get around 4.8Ghz all core on 5600, but i like to test it further for stability before i release any guide for it.
Uh... since i applyed all of that, my m.2 isn't being recognised anymore...
Should I overclock with my stock cooler?
Would it cause any issue?
in this vid, i tuned the processor on stock cooler only, it safe just check your max temp if needed change paste or get a cheap tower cooler
Bro i just noticed ur msi burner showing 2300 and 1800
But my MSI Burner showing
400 and 1600mhz
it's good if it was constantly at 2300, you would kill the processor
If I have a dedicated Gpu should I still change the settings that are for Igpu?
why
hey, how did you lock your cpu clock speed?
i didnt lock it, undervolting cpu pushes the freqs to the max all the time, ofc you need to be decent temps though
Is the voltage setting automatic or offset?
Same question here
Hey, I copied your setup with the stock cooler as well. It's idling at 37°C, but under load, it goes over 80°C and sometimes hits 91°C! While gaming using the iGPU, it maxes out at 75°C. Do you have any tweak recommendations, or is this normal?
Boost up your fan speed to max.
does MSI B450M-A PRO MAX support this overclocking things ?
Yes
What cpu cooler are u using?
stock amd cooler
@@IneffableBenchmarks does the b550 motherboard u using effects performance? Or is it the same if i use b450
Will upgrading the cooler at this oc settings improve performance or should I just stay stock amd?
with my settings if the cpu load increase and the temp reaches above 70C, you will notice that freq will start droping from 4.6Ghz, with any after market cooler that's not the case.
Tried it out with deepcool ak400 and it works! 42C standby and 60c under load ( using dedicated GPU ) If ever I wanna try adding 50mhz more so that it will be 4.7 is it fine with the curve settings you used? @@IneffableBenchmarks
Can you help??? It’s not showing amd oc and my motherboard is updated to the newest one
Can you show me how on an MSI because I have an MSI Bios
it would be almost same, you just have to search for ryzen overclock/cbs or something like that
@@IneffableBenchmarks did you do it via restart or did you somehow access it through software?
@@IneffableBenchmarks I ended up getting an EVGA 2070 Super
What was your room temp and system case while testing this? Because 70 c overclocked on stock cooler is unbelievable 🤯
mine reached only 68
I did the same as you on a msi mobo. But I am not getting a boost in fps like yours. Why's it?
compare the cinebench or geekbench score, if it get a boost its alright, APU's performance will mainly get boost from high freq ram
Bro now my pc is restarting automatically randomly. I did the same steps in the video as you said so what should I do? (Note : sometimes auto restarts while in game and also sometimes it doesen't@@IneffableBenchmarks
@@IneffableBenchmarksalso the performance did significantly increase after your OC guide in this vid and it had no issues like crashes or anything else while stress testing it (I used CINEBENCH R23)
I use this settings and my pc restart suddenly when playing ets2
reset then
What if I don't have AMD Overclocking in BIOS?
Check for amd cbs
most am4 boards supports overclocking, check for your mobo, there are different names for the same option like AMD overclocking, AMD CBS etc.
@@GamingTest-cz3mpi found it but isn't the same
Damn man! The only vid that worked for me to overclock it! I got an RTX 3070 and the 5600G and now it is not limited anymore on 4.2. It gets to 4.6 GHZ and its great! Works much better! I have an 850 wats power supply! Is it any other Overclock I can do to get a little extra fps without doing anything wrong? I have 32 gb of ram at 3066HZ. Please let me know if there is any other better and stable!!
Частоту оперативки бы побольше, либо ты опечатался указав 3066. Сейчас условный минимум это 3200, но 3600 или даже 4200 будут гораздо лучше работать. У красных камней есть некая привязка частоты ядер и частоты оперативки - есть в сети инструкции и даже программы рассчёта для этого
А вот блок питания у тебя даже избыточен для этой системы, но главное, что его достаточно с запасом
What do you use as cooler?
amd stock
Should i do it or not i m sacred if anything happens i will have no backup system or anything
You should give it a try; this one is much safer, with no changes in voltages.
Damn..got stablity with the same values as yours
With stock cooler idles around 41°c
Bro you can overclock your cpu as you want until the temp reaches 70°C
@@iemstanmayabehera645 I think I'm better off just replacing it with the non x variant and add a a380 or something like that since they come pretty cheap
So I think I'll just start saving for that
Still 70° seems quite a lot
Won't it affect the lifetime of the CPU?
Not sure but most of the people suggest that you can overclock until the temp reaches 70,its your call man. Your cpu, your pc, now I just applied this video's bios settings and my god of war 3 performance increased by almost 10fps.i have a r5 5600g, 16gb ddr4 ram, rtx 2060s ,500gb nvme m.2 ssd, toshiba 2tb hdd
I did all of that, it seems to have worked as my CPU is now hitting that 4.6hz but when I go on MSI afterburner it's saying my GPU is only 400Mhz and Memory is 1600Mhz? 😂
Overclocking have any effect?
slight performance gains i guess
What is NB configurator equivalent on Gigabyte board? Can't find that option anywhere.
did your board support search to find
Legend
thank u
Is it good for processor and mobo?
yup
I did same as the video and the maximum is 2100mhz and the voltage is 1467 is it good?
2100mhz GFX value? which board u got?
@@IneffableBenchmarks B550 AORUS Elite V2
@@IneffableBenchmarks and ye gfx value
@@IneffableBenchmarks i finnaly did it i changed gfx voltage to 1.3500 and it works
Did everything, cpu caps at 4.37GHz , wont gi any higher even during single core and multicore stress tests.
strange, whats your board
Will this harm the PC?
It has any bad effect??😊
nope
I Can Use On Ryzen 5 5600h ?
Can i do this with the stock cooler?
Any improvement on editting
very little but there is improvement in timiline scratching rather then render itself lol
Having 70°c up in cpu is quite alarming. Not unless u have good cpu cooler
ive did this and my oc keeps shutting off how can i fix it?
reset the bios, you system is unstable with my settings, try reducing freq
i tried the exact same settings then stress tested it using heaven benchmark
the cpu speed can only reach max 4100mhz while the gpu speed cant be shown and the temp is reaching 90°.any solutions?
Use a real benchmark not heaven something like prime95 and reset all of your bios settings and check temps. Apart from that check that your cooler is mounted correctly and check if the fan spins. Check your bios and the temps at idle, if they're above 50 something's wrong unless you live in a really hot environment.
@@BLGDrive okay thanks
Bro, my motherboard does not have PBO... If I overclock the iGPU only and change VRAM will I still increase performance?
update bios
my pc randomly restarting when i play valorant? whats causing the issue?
overheat issue?
Have the same issue. My temps is only 54°
Hello! I have a dedicated GPU, can i disable the vega integrated GPU?
yes you can manually disable it from bios
@@IneffableBenchmarks i disabled some settings in bios, but my ram still 31.8/32..
Coloquei 4650 na core ratio, 1.35 na voltagem override e as config do video e ta ficando no max 55 de temp. Pode dar algum problema?
I can't find
the UMA Buffer on the B450M-HDV R.4 anywhere on the advance settings, any idea?
does your bios support search and find option?
I have done this without the igpi part as i dont need it
Tem still 78
on stock cooler? how the performance gains?
Do you have any reasons for why my 5600g constantly has driver timeouts when playing games or just turning on? It literally kicks me out of games so I can’t even play
There are few TH-cam videos regarding this. Might help
does b450m ds3h support overcloclking??
yes
how to overclock in msi a520m pro?
its very similar on almost all am4 mobos
a520 doesn’t have overlocking capabilities
A is meaning to, ah sorry no overclock, but B is mean to Byes you can overclock
Bro my clock is stuck at 1600 but not 1800mhz like u and even if i change it in afterburner it stays 1600
thats becuase you have a 3200mhz ram and i have overclock my 3200mhz to 3600mhz that why its showing 1800mhz
Is it safe to oc ram ? @@IneffableBenchmarks
Bro memory still showing 1333mha in afterburner what to do
bro UMA buffer size 3g is safe for 16gb ram and for 32gb ram 4g is safe and okay. And for 8gb 2g
for 16gb ram 2g is not that bad, i have done the comparison of VRAM here- th-cam.com/video/EAM6FhW1KH0/w-d-xo.html
Hello I copied your settings but my cpu stays at 3.67 at max load
which board
@@IneffableBenchmarks I manged to fix it with adjusting power plan settings but the Oc wasn’t stable
Leaving this incase if i forgot the date
20-4-2024
I overclocked as per video
And still the evening after doing the mess
My pc is running don't know how long it will not show any problems
And I don't feel any major performance change it is same ya for now temperature is controlled or stable but don't know about future anyway it was fun experience
Let's see what will happen
have your tried any benchmarks compares like cinebench or 3dmark something
@@IneffableBenchmarks ya but it doesn't have any big difference just the completion became first but It was good bcz i didn't touch volt settings so it's ok
But I didn't understand the fps u get and I get are very different my fps are unstable up and down not a constant range it can go to 30 to 100
And one more thing I don't know if this problem with me or anybody else
My fps comes more in medium if i play on all low 720p then fps are unstable but if i play in low medium 720p or 900p low medium it runs smooth and High fps like yours
So pls reply
Been a few month. How did it go?
Any problem to now overclock the processor and add on gpu later on it like 7-8 months later add a gpu Will overclocking the processor cause any problems with the GPU?
nope, will work fine
Pls reply bro
My manual igpu is not saving the numbers u showing what to do
probably a problem with your mother board battery. unplug it, clean the contacts and plug it again, then try to save the settings.. if the battery is not well-plugged, the mobo cant save the setrings. thats why removing the batery for a few seconds resets the bios
Bro after applying your oc my cpu temps is around 85-90 degrees and cpu does not reach over 4Ghz and sometimes my pc restarts randomly. How do I fix this ?
that means my settings will not work on ur system! reset or tweak settings
@@IneffableBenchmarksWhich settings should I change ?
Bro i have gigabyte b450 ds3h everytime i set igpu clocks after restart its automatically reset to default 0 and pc restart again and again
Bhai PC kab liya tha
@@lilboy7989 wdym??
@@DemonSoul1222 ??
@@lilboy7989 last month liya new
Please bro make a video about msi motherboard, i tried your settings so many times but it occurrs blue screen. Please help bro. My motherboard is MSI b550 gaming edge WiFi
And also How much will be the best value for PBO Scalar with your settings?????
Btw I am using stock amd cooler
safe with stock cooler?
yes, i have done on stock cooler
after doing this my PC did not enter windows and keep restarting
thats means it not stable with ur chip, reset bios
Why does my r5 5600g with 3200hz 16gb ram only have 120ish fps on valo?
Your gpu is 512mb go to the bios and do it 4gb vram and u will see the change trust me ❤
yea 4gb vram is much better
Is it normal that after igpu OC the gpu clock always stays on 2300mhz, even on desktop when there is no load. When there is no OC set, the clock goes down to 400mhz after couple of seconds with no load. Is there any fix for that, and is it bad for the gpu?
ye its good
does it work with an a320m-k?
if your board support overclocking then yes
I did this a theres a black screen on my pc
I have my 5600g for like a year with a 4.65 ghz oc allcore 1.3v maybe i will try more but for now the only bottleneck is the gpu
yeah OCing the 5600g make it too good
bro Can we overclock the cpu cores manually in oc with pbo and co with stock cooler I have a new pc so I am scaed a little bit
bro why does my pc boot loop in restart then shows a blue screen after i overclocked it like yours in the video? any one can help?
my mobo is b450m ds3h wifi
reset bios