Is it true that Siemens made a software to program these controllers paid? Meaning - i buy the controller and then i buy the software to use this controller? Or am I missing something here? Just trying to decide which brand of controllers to take upon, developing PCL programmer skills.
Siemens logo software is 50GBP and almost the only one with paid software from microcontroller families. I like all microcontrollers they all do the same thing and the only thing that separates them is the software. Often it comes down to preference.
Hi, I bought siemens logo from ebay and it is used. There is an existing program on it. Is there a posible to remove or factory reset the logo.thankyou😊
Hi, thanks. In Germany, a Logo!8 cists from 45 ,--€ at eBay. Cable Costa extra. Will the bus cable/ connector to USB from previous versions do Plesse? Thanks a lot anyway! Regards B. PhD Student ee
@@IGSElectronics Hallo, vielen dank für Ihre Antwort. Es ging um die Kompatibilität eines möglicherweise älteren USB-Anschlusskabels mit der aktuellen SIEMENS LOGO! 8- Steuerung. Ich nehme an, dass man das ausprobieren müsste. Ich verbleibe Mit Gruß, B. Dipl.-Ing.
@@Alex51377 Ich werde demnächst ein Video von dem Vorgang machen. Ich glaube, der Übergang zwischen älterem Logo und Logo 8 ist einfach und erfordert nicht viel Programmierung. Sie benötigen ein altes Programm von Logo 6 und wenn Sie davon lauten müssen, benötigen Sie dazu das USB-Kabel.
@@IGSElectronics Hallo, danke Ihnen! Das ist eine interessant Information. Meine Frage bezog sich auf die Hardware. Aber ich denke, ich muss die Kompatibilität eines älterene LOGO!-USB-Kabels einfach ean einer SIEMENS LOGO 8 - Steuerung ausprobieren. Nur, falls Sie es zufällig wüssten. Danek nochmal für das Video. MfG, Dipl.-Ing. B.
Hello, I've been enjoying the videos on Siemens LOGO! Logic Modules. Can the output relays on the LOGO! module handle AC power supply? I want to switch a 110 VAC lamp ON/OFF. Can I connect the + and - from the lamp to the Q1 output relay? I do not want to break my device so I haven't tried it yet, but I couldn't find information anywhere else online. Thanks!
Hi There. Glad you enjoy the videos. All LOGO relays by standard are able to work with up to 240V 8 amps. Make sure under the screen it say relay not transistor outputs and you good to go.
@@IGSElectronics Another question actually :) - Are those busbars at 2:05? I need a way to have a power line with multiple connections to it to power assorted devices. Basically a common power supply node I can attach cables to. Is a busbar what I am looking for?
@@IGSElectronics I'd prefer if it was attached to the DIN rail that the LOGO! is on. Will www.amazon.com/FIXITOK-Terminal-Positions-Pre-Insulated-Barrier/dp/B08D3H52KV/ref=sr_1_4?dchild=1&keywords=Terminal+Strip+Block&qid=1619367235&sr=8-4 work? Or if not a terminal strip, some terminal blocks connected with jumpers?
Hi! I'm an electrician and I have little experience in PLC programming... I need to program a Siemens Logo PLC to control a wika transducer in a basic hydraulic circuit and I would like to know if you can help me? It would be the hydraulic pump, the valves and the wika transducer... Thanks. Marcio Sao Paulo... Brazil...
Is it true that Siemens made a software to program these controllers paid? Meaning - i buy the controller and then i buy the software to use this controller? Or am I missing something here? Just trying to decide which brand of controllers to take upon, developing PCL programmer skills.
Siemens logo software is 50GBP and almost the only one with paid software from microcontroller families. I like all microcontrollers they all do the same thing and the only thing that separates them is the software. Often it comes down to preference.
@@IGSElectronics I have decided to go for Unitronics. Looks easier to learn and software is available for free.
Where did you get that conveyor???
Hi, I bought siemens logo from ebay and it is used. There is an existing program on it. Is there a posible to remove or factory reset the logo.thankyou😊
Power on your PLC and go to Setup>Factory reset. it is almost at the bottom
Hi, thanks.
In Germany, a Logo!8 cists from 45 ,--€ at eBay.
Cable Costa extra.
Will the bus cable/ connector to USB from previous versions do Plesse?
Thanks a lot anyway!
Regards
B. PhD Student ee
Hello there. I struggle to understand the question. Wright in German.
@@IGSElectronics Hallo, vielen dank für Ihre Antwort. Es ging um die Kompatibilität eines möglicherweise älteren USB-Anschlusskabels mit der aktuellen SIEMENS LOGO! 8- Steuerung. Ich nehme an, dass man das ausprobieren müsste. Ich verbleibe Mit Gruß, B. Dipl.-Ing.
@@Alex51377 Ich werde demnächst ein Video von dem Vorgang machen. Ich glaube, der Übergang zwischen älterem Logo und Logo 8 ist einfach und erfordert nicht viel Programmierung. Sie benötigen ein altes Programm von Logo 6 und wenn Sie davon lauten müssen, benötigen Sie dazu das USB-Kabel.
@@IGSElectronics Hallo, danke Ihnen! Das ist eine interessant Information. Meine Frage bezog sich auf die Hardware. Aber ich denke, ich muss die Kompatibilität eines älterene LOGO!-USB-Kabels einfach ean einer SIEMENS LOGO 8 - Steuerung ausprobieren. Nur, falls Sie es zufällig wüssten. Danek nochmal für das Video. MfG, Dipl.-Ing. B.
Once I have uploaded and saved the data how do I safely disconnect?
go offline, then unplug network cable
Yes yes!
I really want to learn more.
Pls tell me manually how does each button use.
(I see it in traffic lights panels.
Cambodia)
Hi Rado, check out the other videos that i am making on Logo relays.
Appreciated
Hi sir while I connect ethernet unable to access the remote device error happening.how can I clear this fault. And how to connect ethernet.
Hello, I've been enjoying the videos on Siemens LOGO! Logic Modules. Can the output relays on the LOGO! module handle AC power supply? I want to switch a 110 VAC lamp ON/OFF. Can I connect the + and - from the lamp to the Q1 output relay? I do not want to break my device so I haven't tried it yet, but I couldn't find information anywhere else online. Thanks!
Hi There. Glad you enjoy the videos. All LOGO relays by standard are able to work with up to 240V 8 amps. Make sure under the screen it say relay not transistor outputs and you good to go.
@@IGSElectronics Great! Thank you for the fast response!
@@IGSElectronics Another question actually :) - Are those busbars at 2:05? I need a way to have a power line with multiple connections to it to power assorted devices. Basically a common power supply node I can attach cables to. Is a busbar what I am looking for?
@@Sheep-- no they are just made up cables to go from one com to other. Easy and cheep
@@IGSElectronics I'd prefer if it was attached to the DIN rail that the LOGO! is on. Will www.amazon.com/FIXITOK-Terminal-Positions-Pre-Insulated-Barrier/dp/B08D3H52KV/ref=sr_1_4?dchild=1&keywords=Terminal+Strip+Block&qid=1619367235&sr=8-4 work? Or if not a terminal strip, some terminal blocks connected with jumpers?
i need logo 8 software
Hello I'm begginer can give me series of tutorials from beginning???
Bravo mate, bravo!
Thank you.
Hi!
I'm an electrician and I have little experience in PLC programming...
I need to program a Siemens Logo PLC to control a wika transducer in a basic hydraulic circuit and I would like to know if you can help me?
It would be the hydraulic pump, the valves and the wika transducer...
Thanks.
Marcio
Sao Paulo...
Brazil...
Slow down talking