Parwaz, I have the Hoover Windtunnel Anniversary Edition here in Canada, and I really like it! Believe it or not, your Wertheim is actually BETTER QUALITY than a Miele, not worse. Miele canister vacs have lousy cord rewinders in them, it's very common to see the centre of the reel break around the spindle, and both sides start to separate so it no longer conducts electricity. Also, starting in 2004 with the Vortex motor, if your circuit board dies in your Miele vacuum, you cannot bypass the board and wire around it! It's because of the design of the motor and the wiring harness. That Wertheim, though, if the circuit board fails on it and is no longer available, can be bypassed VERY easily - it uses a ordinary 2 wire Chinese motor. You just wouldn't have the speed control or electronic bag change light anymore. As for the powerhead, that's a nice one they chose to pair the canister with - the metal brushroll is rebuildable with new strips and bearings, and will resist hair wrapping around it much better than Miele's plastic brushrolls.
Ooooh wow those are excellent points! You’ve opened my eyes and make me appreciate the wertheim better now! I once had a Miele S5 where it kept cutting out randomly every few seconds (it was the PCB at fault) And I couldn’t find any way to bypass the circuit board, so I I had to use a solder iron to directly connect the motor to the cord and switch! The cleanerhead is definitely decent although I prefer the SEB228 myself, I can’t seem to find a way to remove the Wertheim brush strips or even take the head apart despite removing all the screws 🥺
@@parwaz7861 That is a Dustcare PB11 powerhead with a different hood, should be easy to find brush strips for that so just search for that, order and put them in. However, if you REALLY want to improve the powerhead's beating performance, order from Canada a Sweep N Groom metal brushroll. The bristles on it are MUCH BETTER than on the Dustcare PB11. You have to order the whole brushroll though, if you just ordered the Sweep N Groom brush strips it won't work, the metal core on the Dustcare PB11 is slightly thinner, you won't be able to reassemble it. The Sweep N Groom metal core is a bit thicker and better quality. Try that and then we'll see if you still think that SEB228 is better...I'm willing to bet your mind will be changed!
I have a spare brush roll if you want it, Have this model and the 4412 and have 4 power heads as well, the build quality of these was terrible Cheap Chinese things, shame we never got the Electrolux built models here in the UK, they were only available in Australia, Wertheim was only available in Australia until these models, but as they were built so crappy they never lasted very well, The newer models in Australia are made by a different company now and they seem to be more robust
That’s a neat vacuum. You have the best demonstrations.
This vac sounds fantastic!!! 😍😍😍😍😍😍💖
The vac has a unique sound, and it gives a yummy crunch. 10/10 ❤
By heck that seems to have got some right power!canister vavuums arent my forte but i see the appeal of this one - and that testing was epic,Tayyab!
Another great vac test 👏 👌 ❤
😁😊✌🏽❤️
Great test! This seemed to do well with fluff
Thanks for watching I’m glad you enjoyed it!
You should try the Wertheim x3000 or the 3180, I have the 3180 and it picks up so much, and the filtration on it is really good
Wow that’s awesome!! 🤩 I’d love to try one of those someday
deep clean engineering
Parwaz, I have the Hoover Windtunnel Anniversary Edition here in Canada, and I really like it! Believe it or not, your Wertheim is actually BETTER QUALITY than a Miele, not worse. Miele canister vacs have lousy cord rewinders in them, it's very common to see the centre of the reel break around the spindle, and both sides start to separate so it no longer conducts electricity. Also, starting in 2004 with the Vortex motor, if your circuit board dies in your Miele vacuum, you cannot bypass the board and wire around it! It's because of the design of the motor and the wiring harness. That Wertheim, though, if the circuit board fails on it and is no longer available, can be bypassed VERY easily - it uses a ordinary 2 wire Chinese motor. You just wouldn't have the speed control or electronic bag change light anymore. As for the powerhead, that's a nice one they chose to pair the canister with - the metal brushroll is rebuildable with new strips and bearings, and will resist hair wrapping around it much better than Miele's plastic brushrolls.
Ooooh wow those are excellent points! You’ve opened my eyes and make me appreciate the wertheim better now!
I once had a Miele S5 where it kept cutting out randomly every few seconds (it was the PCB at fault)
And I couldn’t find any way to bypass the circuit board, so I I had to use a solder iron to directly connect the motor to the cord and switch!
The cleanerhead is definitely decent although I prefer the SEB228 myself, I can’t seem to find a way to remove the Wertheim brush strips or even take the head apart despite removing all the screws 🥺
@@parwaz7861 That is a Dustcare PB11 powerhead with a different hood, should be easy to find brush strips for that so just search for that, order and put them in. However, if you REALLY want to improve the powerhead's beating performance, order from Canada a Sweep N Groom metal brushroll. The bristles on it are MUCH BETTER than on the Dustcare PB11. You have to order the whole brushroll though, if you just ordered the Sweep N Groom brush strips it won't work, the metal core on the Dustcare PB11 is slightly thinner, you won't be able to reassemble it. The Sweep N Groom metal core is a bit thicker and better quality. Try that and then we'll see if you still think that SEB228 is better...I'm willing to bet your mind will be changed!
have you ever heard of the vax maxima canister vacuum? its the same as this but suction only
Never heard of it, sure sounds interesting!
This brand is popular in Australia I think
🔥🔥🔥
your channel on tik tok is also amazing
This one is a whole quieter out of all the rest.
Is it quiet
Nope it’s quite average noise level wise for a vacuum
bro can you just put the cyclone dust full back in to the tube
Miele C3 electro?
Nope, it’s a Wertheim vacuum
I have a spare brush roll if you want it, Have this model and the 4412 and have 4 power heads as well, the build quality of these was terrible Cheap Chinese things, shame we never got the Electrolux built models here in the UK, they were only available in Australia, Wertheim was only available in Australia until these models, but as they were built so crappy they never lasted very well, The newer models in Australia are made by a different company now and they seem to be more robust