Brother this is an absolute monster I have myself a 4s typhon as well 80mph no problem bro I'm excited to see this run I also run a 26t it's a monster on 4s Congrats again glad to see this build !!
Love the buggy bro!!! Did you upgrade to the BLX120 ESC and upgrade your Diff to the Hot Racing one? The first thing I did to my Typhon 3s is add the BLX120 ESC and did the Cheap Revo trick on my diff. And put a set of Hoons on it!!! And I changed the pinion and it picked up 17mph. And just with those couple of upgrades the buggy is a monster now and is so much fun! What all upgrades did you do to your 3s???
I personally dont see why you ever need more than 2s with a Typhon. I use 3s but i never run it on more than 50% and i have plenty of fun and less accidents and damages.
Omfg do they have a metal chassi for the model for 3s lines cuz my pin slot is dead beat cracked and I don't want a plastic chassi so I'm thinking of using a metal chassi but it's gonna change the whole damn lay out and there would be me buying more parts I don't even need bruh at this point I should buy a different Truggy then continuing this model cuz the chassi sucks compared to the tune Model or even other models of truggys have the pin slots not as one with the chassi cuz that's BS 🗿
Sweet 👍. How is it these 4 years later ? Thanks . I always wanted a typhon but seem to gravitate towards the trucks . Still , one day I d like tot ray a buggy.
You should just bump it to 6s considering the chassis is close to a 1/8th anyway. I. Noticed the big rock and senton and typhon do alot better on 6s for racing 4s is really good to and 3s is ok. But if you want speed n power 6s with the right Gearing for the terrain your running it's a absolute beast.. I done it to my big rock and it's absolutely amazing
Very nice job. I like that you went with the Spectrum system and provided all the information to take the Typhon 3s to a higher level. Super upgrade! 🏆
I am thinking about doing the same upgrade you have! How are your temps? Also do you just do speed runs only or do you bash as well with your 4s Typhon? Last question did you use a Arrma KRATON 4x4 4s BLX - Brushless BLX120 ESC Speed Control outcast ARA102690 and a ARRMA KRATON 4X4 4S BLX - MOTOR (BRUSHLESS 2400KV 3668 4-POLE OUTCAST ARA102690??
Hi Uplift! Sorry for the late reply. Temps are good... I was only doing speed runs but going to put 20t pinion back in, original offload wheels are back on and eventually get some bigger shocks put on as I want to take it back to being a basher again... Motor is the: ARA390265 and ESC is the: AR390264
Hi Pauly great work on the Stealthon. Beauty. I bought the Typhon 3S V3 and need your advice. You lowered yours for road mastery. But I jump mine so would like a shock upgrade to reduce chassis-slap landings. I added a stack of spacers which helped but you might know a good set of shocks more suitable for when I SEND IT. Thanks 👍🏻
Hi Jim thanks and glad you like it! I totally understand the body slap when bashing... I have heard that the Typhon 6s shocks do the job nicely they go straight on with a couple small modifications. Your best bet is to search on TH-cam for a tutorial on fitting them on. Best of luck and happy bashing 😁👍
Amazing job on this brother. My question is how did you manage to get the suspension so low? The Typhon 3s doesn’t come with droop screws. Thanks in advance. Again yours looks and performs amazingly
Hey, well done dude 👍 is the combo you r using the same as the 6s typhon? Does the car come with swey bars? Like can I get the brushed version and convert it to that? Thank you in advance
Hey Ramcedes! No this is not the 6s combo... its is the 4s version if you like. With the gearing and how light the 3s version is its a absolute rocket. Yes I should imagine that should not be a problem. However I would maybe look into the diffs of the brushed version as I am not sure if they are the same as the 3s brushless diffs or not. your welcome and really sorry for the late reply! 👍
Hey RLine... I'm really sorry for the late reply! Thank you and it's the eTronix Waterproof Metal Gear Servo - 21.8Kg - 0.16s I will make a list of all upgrades in the next Stealthon video description :)
Just finally found one in stock online and ordered it. I love what you've done, though I don't have expertise to upgrade all this. But I may give it ago.
I have a Typhon 3s. but i put a blx 185amp and a 4074 2050kv motor. i keep bowing out the motor mount plate. i need to make a mount for the back of the motor.
Hey Ray... no I just purchased upgraded lower aftermarket shocks off ebay from the US plus it has the hoons on which is a smaller diameter tyre than the originals... hope this helps mate 👍
@@FunTimezRC i have thos same exact ebay shocks but cant drop my car lower? If i raise the shock collar all the way up it makes it droop. Is that what you do?
Thank you. EBay, just type in search bar 'Typhon 3s Socks' and you should see them. If you need a link just add me on Instagram and I will send you it 👍
Thank you Speedskyo!!! Oh I bet she loves it in Pink! It does look really nice in black, are you going to spray a new clear body or the outside of original body?
@@FunTimezRC I stripped the paint from the inside and sprayed it pink leaving the decals in place. I’m doing a black one for one of my Frankenstein cars. Put a new Traxxas 3s vxl in a 3s senton and put all Traxxas links with metal ball ends in the front end. No wheel slop now. I think the senton body is to big and runs on any aftermarket tires. I have 2 more cars to fix the 3s Arrma steering slop. It completely fixes the issue. Thanks xx for the comment!
I’ve been debating wether to get the Typhon 3s for some time after seeing yours I now have no choice. That thing looks mental especially with the hoons. Top job looking forward to the 26 tooth pinion run. 👍🏻
Is there any additional things that you need to add to the car in order for it to run perfectly on 4S? I plan on doing the same thing with the same motor and same ESC I just want to know what other steps I need to take in order to complete it.
I have the blx 120 system in and it all works perfectly. The car stock comes with the blx 100 system and if you run that one 4s i recommend adding a motor fan for cooling if you can. Apart from that all good. Oh also might want to change the diff oil out
Yes absolutely yes but But deans No absolutely not for 14 volts. Pls do not continue to overwhelm the plug and possibly fry your system. The car is to beautiful. / Gnarley build man. ❤️👊😀
Thank you send & blast! So you advise to loose the deans... I agree! Just can't understand why they would manufacture the 14v battery with a deans on? Glad you like it and thank you for the advise 😁👍🙏
Fun Timez RC I do not know either because the voltage rating for a deans plug is 7ish volts to 11 absolute max. The actual power rating is probably around 7 volts. I gotta look into it now. I can’t remember the actual rating As it is good to know . 👊🤩
Fun Timez RC Found some info bud. Some deans are tin coated copper contacts. some differ But the max rating is 25 continuous amps draw rating. Any higher amp draw will inevitably do damage down the line. Happy bashing or racing bro. 👊😀
not in this system no as its not rated for that size battery.... my bro has the 6s Typhon and to be honest there is not really a difference between them on a drag race. I wouldn't want to push it anymore than 6s 👍
Hi Philip, I have not to be honest... Had no problems so far but apparently the new 3s Typhon version has better diffs. So when I need to I will put those diffs in. Good tip though mate! 👍
Brother this is an absolute monster I have myself a 4s typhon as well 80mph no problem bro I'm excited to see this run
I also run a 26t it's a monster on 4s
Congrats again glad to see this build !!
Thank you bro! It is a great bit of kit... It will be interesting to see what speeds she can hit!
Thanks for your kind words mate, it means a lot 😉👍
Loooove this!
Thank you! 😃
Love the buggy bro!!! Did you upgrade to the BLX120 ESC and upgrade your Diff to the Hot Racing one? The first thing I did to my Typhon 3s is add the BLX120 ESC and did the Cheap Revo trick on my diff. And put a set of Hoons on it!!! And I changed the pinion and it picked up 17mph. And just with those couple of upgrades the buggy is a monster now and is so much fun! What all upgrades did you do to your 3s???
I personally dont see why you ever need more than 2s with a Typhon. I use 3s but i never run it on more than 50% and i have plenty of fun and less accidents and damages.
Because why not??
Love Arma and Rc cars😊Nice job Rc friend Thanks 🙏 for you sharing this 😊
Thank you so much 👍
Omfg do they have a metal chassi for the model for 3s lines cuz my pin slot is dead beat cracked and I don't want a plastic chassi so I'm thinking of using a metal chassi but it's gonna change the whole damn lay out and there would be me buying more parts I don't even need bruh at this point I should buy a different Truggy then continuing this model cuz the chassi sucks compared to the tune Model or even other models of truggys have the pin slots not as one with the chassi cuz that's BS 🗿
What’s the body shell for it, if there’s one for sell I would totally buy it
Hey Phantom... i purchased the standard clear body and just sprayed it myself 👍👌
@funttimezrc how did you lower your typhon I have a v3
Aftermarket shocks... I got them on Ebay shipped from America to here in the UK 👍
Sweet 👍. How is it these 4 years later ? Thanks . I always wanted a typhon but seem to gravitate towards the trucks . Still , one day I d like tot ray a buggy.
Where did you get that body and whats the name of the body. Thanks
Hello Jose! It's just the Typhon Clear body and I sprayed it myself... I got it from Ebay. Hope this helps 👍
Buddy that area is too small for that beast man you need way more room to open her up man
Yes very true bud! Sadly that beast is at a new home so with my next speed car I will definitely go somewhere with more room to 'play'!! 😉😆👍👊
@FunTimezRC yes sir i see
Still have the plastic spur and diff gears in this setup?
Hi Ray Original spur and diffs... holding up really well still 👌👍
You should just bump it to 6s considering the chassis is close to a 1/8th anyway. I. Noticed the big rock and senton and typhon do alot better on 6s for racing 4s is really good to and 3s is ok. But if you want speed n power 6s with the right Gearing for the terrain your running it's a absolute beast.. I done it to my big rock and it's absolutely amazing
Put some lights on it, front and back
Yes I have put some on the front... Will be back uploading in the next couple of weeks so you will see what she looking like
O my bloody god that is fast son you certainly have updated well done son brilliant video keep them coming 👍👌😜xx
Thank you dad! 😁👍 X
Typhon is my favorite car at the moment! yours looks great mate!
Thank you Michael! It is a great RC car 👍
Very nice job. I like that you went with the Spectrum system and provided all the information to take the Typhon 3s to a higher level. Super upgrade! 🏆
Thanks! 👍
That is rapid
Did you ever do the 26t speed run? Do you have a video link cuz I can't find it
I am thinking about doing the same upgrade you have! How are your temps? Also do you just do speed runs only or do you bash as well with your 4s Typhon? Last question did you use a Arrma KRATON 4x4 4s BLX - Brushless BLX120 ESC Speed Control outcast ARA102690 and a ARRMA KRATON 4X4 4S BLX - MOTOR (BRUSHLESS 2400KV 3668 4-POLE OUTCAST ARA102690??
Hi Uplift! Sorry for the late reply.
Temps are good... I was only doing speed runs but going to put 20t pinion back in, original offload wheels are back on and eventually get some bigger shocks put on as I want to take it back to being a basher again... Motor is the: ARA390265 and ESC is the: AR390264
Hope this helps and I will add upgrades list to the next Stealthon Vid. Take care and happy RCing 😊
Hey bro how you get lower the car ?
Aftermarket shocks... I got them on Ebay shipped from America to here in the UK 👍
Hi Pauly great work on the Stealthon. Beauty. I bought the Typhon 3S V3 and need your advice. You lowered yours for road mastery. But I jump mine so would like a shock upgrade to reduce chassis-slap landings. I added a stack of spacers which helped but you might know a good set of shocks more suitable for when I SEND IT. Thanks 👍🏻
Hi Jim thanks and glad you like it!
I totally understand the body slap when bashing...
I have heard that the Typhon 6s shocks do the job nicely they go straight on with a couple small modifications. Your best bet is to search on TH-cam for a tutorial on fitting them on. Best of luck and happy bashing 😁👍
where did you find the replaceable shock caps
Nice Sleek an Low Look..Very Wel Job Done..Looks As If It Handles Smooth an Very Fast..Great Build..🤘👍🙏
Thanks a lot for your kind words, really appreciate it! 🙏👍😁
Amazing job on this brother. My question is how did you manage to get the suspension so low? The Typhon 3s doesn’t come with droop screws. Thanks in advance. Again yours looks and performs amazingly
hi Joseph... I got the struts shipped in from America 🇺🇸
they are on ebay, a direct fit and made for the 3s.
Thanks a lot, it means a lot!! :)
Bro where can I purchase that wheelie bar?
Amazon has it, that's where I got mine.
You have to look for the Arrma Granite wheelie bar and then it's a direct fit! Hope this helps 👍
Hey, well done dude 👍 is the combo you r using the same as the 6s typhon? Does the car come with swey bars? Like can I get the brushed version and convert it to that? Thank you in advance
Hey Ramcedes! No this is not the 6s combo... its is the 4s version if you like. With the gearing and how light the 3s version is its a absolute rocket.
Yes I should imagine that should not be a problem. However I would maybe look into the diffs of the brushed version as I am not sure if they are the same as the 3s brushless diffs or not.
your welcome and really sorry for the late reply! 👍
Hi Pauly, if you do t mind sharing which servo did you put in this beast ?
Hey RLine... I'm really sorry for the late reply! Thank you and it's the eTronix Waterproof Metal Gear Servo - 21.8Kg - 0.16s
I will make a list of all upgrades in the next Stealthon video description :)
Just finally found one in stock online and ordered it. I love what you've done, though I don't have expertise to upgrade all this. But I may give it ago.
Oh that's great, you will not be disappointed!
Just watch a couple 'how to' vids and give it a go... Pretty straight forward.
Best of luck and enjoy 👍
Where did you get the case from, trying to find a black one for a while and having trouble
Hi Epiclotion, I purchased a clear body off amazon and sprayed it myself. Hope this helps 👍
👍Wow sick looking Typhon. Nice setup. Subbed👍
Thank you Paul! Really appreciate it 😁👍
what shocks are you running?
I have a Typhon 3s. but i put a blx 185amp and a 4074 2050kv motor. i keep bowing out the motor mount plate. i need to make a mount for the back of the motor.
Add me up on insta and I can send you a link to a stronger motor mount plate I just got for mine and its way way stronger!!! 👍
@@FunTimezRC I found a new one. I got one for my Typhon and I have a 4s Senton that I got one for. I found it on eBay for $20.
I like your car body painting！ so where is the silver shock body from？
Thank you... If you add me up on Instagram I can send you a link 👍
You go faster with this Wheels ?
What kind of brush mate..I want buy one please
hey Osing, can you tell me what you mean when you say brush please?
Looks very sexy and lots of fun! Wonder if you can recommend good metal shocks. Thanks.
Hi Ted... If you add me up on Instagram I can happily send you a link to some 👍 and thank you!
@@FunTimezRC will do
Did you lower the car by putting fuel line tubing or orings inside the shock plunger shaft?
Hey Ray... no I just purchased upgraded lower aftermarket shocks off ebay from the US plus it has the hoons on which is a smaller diameter tyre than the originals... hope this helps mate 👍
@@FunTimezRC i have thos same exact ebay shocks but cant drop my car lower? If i raise the shock collar all the way up it makes it droop. Is that what you do?
hey wheres the shocks from? can i have your ig to dm you?
Shocks from Ebay mate, sure search for Fun Timez RC on insta and send me a message... Will be happy to send you a link 👍
Looking nice I am new to rc hobby, I am getting the typhon 3s v3 next week, what diff oil do you recommend for front and rear.
hello I'm from Brazil!!! What modification did you do to walk with 4s? I have an original typhon 3s !!!
what shocks are you running as im looking to upgrade mine
Hi Matt if you add me on insta I can send you a link to them 👍
Great paul she seems to be running really well and is looking great 👍
Thank you David... I will do a speed run in the next couple weeks 😉👍
Great video where you get shocks from plz
Thank you. EBay, just type in search bar 'Typhon 3s Socks' and you should see them. If you need a link just add me on Instagram and I will send you it 👍
Love the black body, I painted my daughters pink. Looks great!!!im painting mine black because of you, thanks!
Thank you Speedskyo!!! Oh I bet she loves it in Pink!
It does look really nice in black, are you going to spray a new clear body or the outside of original body?
@@FunTimezRC I stripped the paint from the inside and sprayed it pink leaving the decals in place. I’m doing a black one for one of my Frankenstein cars. Put a new Traxxas 3s vxl in a 3s senton and put all Traxxas links with metal ball ends in the front end. No wheel slop now. I think the senton body is to big and runs on any aftermarket tires. I have 2 more cars to fix the 3s Arrma steering slop. It completely fixes the issue. Thanks xx for the comment!
@@FunTimezRC stripped the paint on the inside and painted it. Came out perfect Barbie pink lol!
@@SpeedSyko well done! If you are on Instagram, send me a pic... would love to see it!! 😁👍
What site did you use? I can’t find parts anywhere
I’ve been debating wether to get the Typhon 3s for some time after seeing yours I now have no choice. That thing looks mental especially with the hoons. Top job looking forward to the 26 tooth pinion run. 👍🏻
Thank you gamer RC! I really recommend getting one!! A lot of car for the money! you will not be disappointed 😉👍
How do those axles hold up? I know my traxxas slash one’s were always breaking when geared up and powered too high.
So far so good mate... no problems at all! 👍
Is there any additional things that you need to add to the car in order for it to run perfectly on 4S?
I plan on doing the same thing with the same motor and same ESC I just want to know what other steps I need to take in order to complete it.
I have the blx 120 system in and it all works perfectly. The car stock comes with the blx 100 system and if you run that one 4s i recommend adding a motor fan for cooling if you can.
Apart from that all good. Oh also might want to change the diff oil out
Sell me this car? 😙🤣
For the right price...hit me up on Instagram 🤣🤑
Yes absolutely yes but
But deans No absolutely not for 14 volts.
Pls do not continue to overwhelm the plug and possibly fry your system.
The car is to beautiful. / Gnarley build man. ❤️👊😀
Thank you send & blast!
So you advise to loose the deans... I agree! Just can't understand why they would manufacture the 14v battery with a deans on?
Glad you like it and thank you for the advise 😁👍🙏
Fun Timez RC
I do not know either because the voltage rating for a deans plug is 7ish volts to 11 absolute max. The actual power rating is probably around 7 volts.
I gotta look into it now. I can’t remember the actual rating As it is good to know . 👊🤩
Fun Timez RC
Found some info bud.
Some deans are tin coated copper contacts. some differ
But the max rating is 25 continuous amps draw rating.
Any higher amp draw will inevitably do damage down the line.
Happy bashing or racing bro. 👊😀
Can you put up a list of the upgraded parts so I can see where to get them please?
in a future video I will be sure to do so :)
Awesome car 😎, what shocks are those?
Can these be stretched like the 6s version
As far as I am aware no however these are longer than the 6s chassis 👍
@@FunTimezRC
So ur saying the wheel base is longer on the 3s vs the 6s??
That seems weird doesn’t it??
@@marctoscanini7225 hi yes, a family member had the 6s and it was shorter than my 3s... crazy but true 👍
I just bought the Arrma Typhon mega 1/10 550 brushed. Looking forward to upgrading.
A great starter buggy mate and easy to mod... you will not be disappointed 😁
Time flys by lil over a month now with typhon now selling for New SCT for racing. Still for Team Arrma.
what a sick ride! I need to get some form of Typhon lol
😉👍Thanks PhillyB! Hell yeah, you won't be disappointed mate 😏👌
I have the newest typhon 3s BLX V3. It rips on 120c 3s lipo, I am thinking about upgrading to a 4s battery.
Really awesome
Thank you!
What shocks are you running?
They are the big bore shocks off of Ebay from the US... in a future video I will put a link to all the upgrades. sorry for the late reply! 👍
You think stock 3s blx can run a 26t pinion with a motor fan for a couple speed runs?
yeah that wouldn't be a problem slop! Good luck!!
@@FunTimezRC thanks
no problem 👌
yep that's right my friend! 😉👍
Also can you use 6s battery?
not in this system no as its not rated for that size battery.... my bro has the 6s Typhon and to be honest there is not really a difference between them on a drag race.
I wouldn't want to push it anymore than 6s 👍
What wheelie bar do you use?
it's off of the Arrma Granite... a direct fit! ;)
That’s a sick man! My question is to do the 4S upgrade is it cost more than just buying a 6S out the box?
6s with a battery is gonna cost you more than a conversion
@@DsicC Which is faster do you think?
@@mjl6425 depends on gearing and batteries used
How fast is yours?
@@mjl6425 mine is a 3s typhon with 14t pinion, v2 motor and maxx wheels. It should go about 45-50
👍🏽
🙂
Did you shim the diffs? I've been shimming mine on my 4s Kraton and 3s Granite. Definitely keeps them from stripping.
Hi Philip, I have not to be honest... Had no problems so far but apparently the new 3s Typhon version has better diffs. So when I need to I will put those diffs in. Good tip though mate! 👍