Great video! Just bought a 1000 XMR and am in the process of running wires. I can't figure out how to pull off the side plastic or instrument panel/gauge cluster to get to the 12v adapter/plug that you connected yours to. I think I need to disconnect the two wires first before unscrewing the 12v plug otherwise the wires will twist too much. Any tips or suggestions?
Congrats on your purchase. If memory serves me correct I just twisted the cigarette lighter until it was out then when I connected my wires And untwisted the power and ground wire to the cigarette lighter. Now if you’re wanting to remove the console here are the three steps for that. One remove the four screws holding the console in. Second, you will need then will need to push down and remove the LCD display. Third then you’ll reach in the back your hand should be in the back of the consul be in the behind the red relocation kit and you’ll want to pull up. You should hear some clicking
Have you done (FarMudding or another's) footwells yet? As, I am wondering whats the best self-cleaning ones (or large orifice ones)...cause the factory ones making a pile of mud in the corner everytime I ride - is getting old quickly.... -_-
Appreciate that. No issues what so ever. I did mine on the renegade about a month or two before hers and no issues. Just take your time. The silicone they provide is good quality stuff. I just let it set for 24-48 hours before riding just to be completely safe.
@@HanginWithPA hey hope all is well. It's finally warm enough to work on the quad. I have everything siliconed together and I'm on the wiring. The gray positive and negative box, it shows to have a wire off those to the power and negative supply, do I just pick an open spot on the gray box where the halo wires go to? Also what tool did you use to unscrew the 12 volt outlet? Thanks!
Had not a single issue with the app since I installed these on my wife’s outlander nor my renegade. Now the reviews on the App Store did not scream wow this is an amazing app but no issues so far
No problem. Yeah the 2.0s came out a week or two after I ordered the Bluetooth version for my wife’s. They look awesome, so I’m sure you will be happy with them.
Hey, I installed these lights on my outlander, they were working great, until my far right halo wouldn’t go in sync with the others ones, it won’t go the same color, or anything. Does anyone know how to fix this?
I spent 3 hours trying to find the dang app! Thank you so much for this video jsut installed 2.0s on my 21 renegade
Nice, glad I could help 💪🏽🤘🏽🎉.. the 2.0 dropped 3 weeks after I got the wife’s on 🤦🏽♂️🤷🏽♂️
The only part of this video I need and you stopped it and just talked about it after. 😂 awesome video
What part was that?
@@HanginWithPA removing the cluster and unscrewing the nut that holds the 12v power plug on. I figured it out just took forever. Lmao
Hahah nice 💪🏽🤘🏽
Great video. My install will be tomorrow
🙏🏽🙏🏽🙏🏽. Awesome
I have some of that yellow and black wire from my Uverse days lol
No comment 😂😂😂 Let’s just say I know a few people
@@HanginWithPA I will be using the same wire
Hahahah good stuff brother 💪🏽
My halos look great!
Your welcome
Have you created a video to install the rear Far Mudding Halos??
No I have not.. also have not ordered the rear halos yet
Superrrrrr smart install!! Sad I can only like it once lol. Thanks for sharing your craft! How are they holding up a year later?
Appreciate it. Hers are fine, I lost one couple months ago and have had not time to see if it’s just a wire or something more .
Great video! Just bought a 1000 XMR and am in the process of running wires. I can't figure out how to pull off the side plastic or instrument panel/gauge cluster to get to the 12v adapter/plug that you connected yours to. I think I need to disconnect the two wires first before unscrewing the 12v plug otherwise the wires will twist too much. Any tips or suggestions?
Congrats on your purchase. If memory serves me correct I just twisted the cigarette lighter until it was out then when I connected my wires And untwisted the power and ground wire to the cigarette lighter. Now if you’re wanting to remove the console here are the three steps for that. One remove the four screws holding the console in. Second, you will need then will need to push down and remove the LCD display. Third then you’ll reach in the back your hand should be in the back of the consul be in the behind the red relocation kit and you’ll want to pull up. You should hear some clicking
Damm it look sooo good
Thank you 🙏🏽💪🏽
Looks really good big dawg! Which set are those?
The Far Mudding Bluetooth ones... if I would buy again I would probably buy the Far Mudding Chasing 2.0
Just subbed bro!
Appreciate that 🙏🏽🙏🏽🙏🏽💪🏽💪🏽💪🏽
Have you done (FarMudding or another's) footwells yet?
As, I am wondering whats the best self-cleaning ones (or large orifice ones)...cause the factory ones making a pile of mud in the corner everytime I ride - is getting old quickly.... -_-
I have not. i probably will go far mudding
@@HanginWithPA Let me know what you decide in the end - if you remember of course. :)
@@michaelmaschinot2891 it’s probably going to be a while before I get some boards, but far mudding has my vote
@@HanginWithPA Same, but after eyeballing both 5 mins ago - FM has holes towards the front of the well; the L7 does not - FM is my vote.
Where did you get the mud princess on radiator
Outlaw concepts out of Canada. Have a video on my channel with all his information.
What size of halos did you used in the renegade front lights? 70 mm?
Honestly don’t know, it’s whatever comes in Far Mudding halo kit for the renegade .
Is there a link to where I buy the kit for a 650. Xmr outlander ?
farmudding.com/
They look nice! how's that silicone holding up?
Appreciate that. No issues what so ever. I did mine on the renegade about a month or two before hers and no issues. Just take your time. The silicone they provide is good quality stuff. I just let it set for 24-48 hours before riding just to be completely safe.
@@HanginWithPA awesome , thanks! Gonna order for both my outtys
No problem. Nice you love them 💪🏽🤘🏽🤙🏽
Did you pull off plastics or just unscrew the lighter to run the wires? Thanks!
Just unscrewed the lighter to run the wires. Pull it out and rain wire up through it and soldered and put lighter back in
@@HanginWithPA thanks! I appreciate it
Np man, if you have any other questions let me know .👍🏽🤘🏽
@@HanginWithPA hey hope all is well. It's finally warm enough to work on the quad. I have everything siliconed together and I'm on the wiring. The gray positive and negative box, it shows to have a wire off those to the power and negative supply, do I just pick an open spot on the gray box where the halo wires go to? Also what tool did you use to unscrew the 12 volt outlet? Thanks!
I loosened them up with some pliers then used my hand.
Honestly regarding the boxes I don’t remember but that sounds correct.
where did you end up running the wires to get them to the back side of the cigarette lighter ?
Up Through the plastics . When you pull the cigarette lighter out you can kind of seem some room to run some wires
I just installed mine, but did not cut a gap in the plastic near the headlight. Is this a crucial step to the install I missed? Or can I let it fly?
I cut mine so they sit flush.
Are these just the regular green? I can only find “green”
These are the Bluetooth multi color ones.
What is the app that is used for changing the lights?
Happy Lighting
Which kit is this? I want to get the kit like this because the rings are solid instead of individual leds
Far Mudding Bluetooth kit
Can someone tell me a link or website to buy these from for my outlander
Farmudding.com
Is the Bluetooth connection reliable? I was reading reviews in the app and there’s mixed reviews on the app not connecting properly.
Had not a single issue with the app since I installed these on my wife’s outlander nor my renegade. Now the reviews on the App Store did not scream wow this is an amazing app but no issues so far
@@HanginWithPA Thank you, I appreciate the reply! I took your advice from another one of your comments and ordered the chasing halos 2.0!
No problem. Yeah the 2.0s came out a week or two after I ordered the Bluetooth version for my wife’s. They look awesome, so I’m sure you will be happy with them.
Is there another app to use this happylighting app won't work for mine?, it can't find the lights under devices
Been using them on both no issues. This is the only app i know of
I just installed this on my 19 xmr 1k outty but have no app cant find an app do you know where to get it??
App is called HappyLighting all one word it looks like. If you can’t find that I would search for Happy Lighting
@@HanginWithPA thanks very much and the look sick!!
No problem 💪🏽🤘🏽🤙🏽
When you turn on the lights not the halos will the glue melt or it won't do nothing
Nope.. no issues at all
@@HanginWithPA but if keep them on like while riding at night for s long time
I be more worried about taking them out when your riding and hitting something. Have had ZERO issues..
Are those the chasing halos or the chasing halo 2.0s
The halo ring looks like it has a clip on it sort of like the rjwc halos
These are the chasing halos. The 2.0s came out about a month or so after I did this video
Wear is far mudding based out of
Indiana
Good looking lights but I hate the silicone idea all the technology in the world and we’re glueing them on 🧐
Yeah I’m with ya on this one
Hey, I installed these lights on my outlander, they were working great, until my far right halo wouldn’t go in sync with the others ones, it won’t go the same color, or anything. Does anyone know how to fix this?
I would suggest to call far mudding .
@@HanginWithPA oh, did not know I could do that, thank you
Let me know what they say
@@HanginWithPA they don’t have a number, but I sent multiple messages to them about it, I’ll keep you updated.
Awesome