HOW TO BUILD A WEDDING LAYERED ARCH .
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- IN THIS VIDEO I SHOW YOU HOW TO BUILD A WEDDING LAYERED ARCH WITH BIRCH WOOD AND A COUPLE OF HAND TOOLS, #J'S DIY n STUFF
#diy #homedecor #doityourself #homeimprovement #workingfromhome #wedding #weddings #decoration #partydecorationideas
Fantastic!❤
Thank you 🙏🏽
I ❤️it
Thank you 🙏🏽
Hi thank you for sharing this video and can you please let me know what kind of of wood did you use for the sides? It looks so bendable and easy to work but you didn’t specify what kind of plywood is it
Thanks 😊
I used 1/2” birch plywood for the arches and 1/8” hardboard from Home Depot..hopefully this helps
Awesome job the 1/8 board how wide did you cut the arch strips that wrap around the 1/2 inch wood
4” wide
@@JSDIYNSTUFF2024thanks
You cut the arches with the jigsaw, the rest with the saw, the jigsaw cut is thinner than the saw blade. Did it not affect you when assembling?
The difference was less than 1/6” of an inch so I sanded down the sides and the minor gaps were filled in with silicone caulk
Hi. Thanks for the video. 🇿🇦
- plz what is the size of the.board height & width.
- width size of the cuts?
The board is a 1/2” birch 4’x8’ plywood and the width for each cut is 4”
How do you know how to cut the bottom part. I’m a beginner sorry
Once the whole thing has been completed, lay it on its back then take a measurement of the width and length. (Of the bottom part)Cut a rectangle piece of wood attach it to the bottom with either nails or screws and then use a router to cut the excess material. If you don’t have a router you can use a jigsaw too, even a hand saw 🪚
But a router is the way to go and easier.
I hope this helps.!!
Thichness of the board?
Do u use nail
Yes I did , I used my nail gun (Brad nails and wood glue)
Thank you 🙏