This video is about steps in changing the fused bulb in MyVi #lagibest AC panel. It uses T4.2 halogen bulb with 10mm base. IT can be upgrade to white LED.
Thank you. I went check back and found the installation of the new bulb in 3:33th minutes onwards. Closing procedure also includes the sprocket placement. In 5:40th minutes also includes the fixing the panel back into position. Hope it helps.
Hi bro, do you have a video on how to fix the speedometer's LCD backlight? I have the same myvi model as you do, however the backlight of the LCD screen that shows trip A, trip B and fuel level in the speedometer is broken. I still can see the digits though by using torch light to shine the screen and get the reading from reflection but I'm hoping to change the backlight once and for all 😂
@@CTBLiew Perodua quote me 600+ to replace a new speedometer which I think not worth it so I was thinking to swap the light myself. Do you provide the light replacement service bro? 😁😁
@@lexwong4685 Advise to join MyVi Malaysia club. Join a few of them with lots of member. Hope someone faced this issue and found solution. So far I don’t fix if it is not broken policy. Try search for the LED online for Myvi meter backlight from Lazada or Shopee.
Those brown color lamp holder comes with halogen bulb. You may buy online with T5 halogen lamp as keyword. Refer 3:28th minute for an idea. It does not comes with the green sleeve. Remember do not lost the green sleeve!
Just sent my car to repair the aircon and all the lights on the aircon swtiches are not on, but they work perfectly find controlling the aircon. What would be the problem? any wire not connected?
@@CTBLiew yea all 3 switches working fine only no lights on, only realised when i drive just now in the late evening. Fuse problem? Since its only one socket and wire insertion ya? Where's the fuse to this matter? TQ for the swift reply! : )
@@CTBLiew yes its working before sending to the aircon workshop the night before. Is there any relay or fuse for the lights for 3 of the aircon switches or the technician forgot to plug in some wire?
Back then went I still can’t afford a camera rig until quite recently bought one. Thanks to all support from my viewers. Should have more stable videos since then.
Advice from me, you could show the process how you assemble the bulb ~ ✌ other than that is all great 👍😊
Thank you. I went check back and found the installation of the new bulb in 3:33th minutes onwards. Closing procedure also includes the sprocket placement. In 5:40th minutes also includes the fixing the panel back into position. Hope it helps.
Thank you very much bro... so educational.. will change my bulb DIY... T4.2 bulb rite?
Yes. They have LED type now with different colour. Check if you want it.
Very helpfull. tq
Thank you for your support.
Exora punye mcmne ek Tuan?? Saya punya lampu pon blown.. bahagian selector temperature tu jugak👍
Lebih kurang sama je….
Nice tutorial bro,but can i change hazard light switch also?my one no light ady..
It works the same don’t worry.
Mantapp kawan...klu cara buka bulb meter ada kh..
Lebih kurang same je
So all the aircond switch, fogger switch use the same size bulb? For myvi lagi best
Gaudentius Grishnackh
As long as they have the same shape.
good work.
Thank you!
Hi bro please do video for changing myvi dashmeter bulb
Same concept just at different place.
Hi what are the holes at the ceiling for? I have the 2012 version of myvi tho but not same model.
Which minute do you refer to?
Haiii may i ask..for myvi icon 2015 need to use wht size of bulb, T4.7? Then for 3 panel need 3 bulb?
The 3 panel indeed each has one. No idea about MyVi icon bulb. Where is the icon do you refer to?
Boleh x tunjuk cara tukar lampu meter myvi lagi best?
I cuba buat.
@@CTBLiew klu buat ..boleh thu saiz mntol mter sbb jnis kne solder kn? Nnti bgthu saiz ya sbb saya pon nk tukar sya pnya ada yg xmyala
Biasanya sama jenis seumpama dalam video.
what bulb is that? i am hoping to find white color.
I need to replace mine for the last dial (AC knob)
Mine is T4.2 dashboard bulb. The lamp casing is brown with 10mm base. Try measure the diameter base of your white holder.
@@CTBLiew where did u buy the bulb?
Look for dashboard bulb from either Lazada or AliExpress. I bought it from a local shops. They kinda overcharged me. Better get from online shop.
is it the same for 1st and 3rd knob? and can I use t5 bulb for myvi lagi best?
Good question! But unfortunately it uses T4.2. The base is 10mm diameter. The T5 is simply too big.
@@CTBLiew do you have the video how to change the bulb for knob 1 and 3..or they are the same way as the middle?
Same as the middle.
Nice video. Hmmm one question, is the beige dashboard panel above identical with black dashboard version in terms of wiring, clips etc?
Should be similar just color different. Thanks for subscribing to my channel.
Buka cara senang ade…nk jga buka cara susah😂😂😂
Ada cara lagi senang?
Hi bro.. Minit ke 1:56 mcm mana keluar kn tombol suis dr tapak die.. Harap dapat membantu.. Tq bro..
Guna screw driver kecil umpama dalam video anjak kaki putih keluar dari panel.
the 3 panel also used the same size bulb? (t4.2)?
Yes.
T4.2 dgn t5 sama tak??
Lain. Kena guna sama size.
Hi bro, do you have a video on how to fix the speedometer's LCD backlight? I have the same myvi model as you do, however the backlight of the LCD screen that shows trip A, trip B and fuel level in the speedometer is broken.
I still can see the digits though by using torch light to shine the screen and get the reading from reflection but I'm hoping to change the backlight once and for all 😂
Woah… that’s too hardcore already. I think those uses smd LED. Advise to get OEM meter or upgraded version of meter.
@@CTBLiew Perodua quote me 600+ to replace a new speedometer which I think not worth it so I was thinking to swap the light myself. Do you provide the light replacement service bro? 😁😁
@@lexwong4685 Advise to join MyVi Malaysia club. Join a few of them with lots of member. Hope someone faced this issue and found solution. So far I don’t fix if it is not broken policy. Try search for the LED online for Myvi meter backlight from Lazada or Shopee.
👍👍
Thanks. Remember to subscribe to my channel.
Hi, does lagi best and icon share the same bulb size? T4.2? Thanks!
Need to open up and check if the bulb holder is brown color.
Same. Both using T4.2
@bukharinaim9528 thank you.
Myvi old 1st what type bulb use, t5 or t4.2
Best guess should be T4.2.
@@CTBLiew tq for info 👍
myvi se lahi best what type bulb use?
T4.2. Brown base as shown in video.
Myvi 1.3 lagi best 2011 memang asal tiada lampu ke? Saya punya dah tukar mentol tapi tidak menyala
Asal memang ada lampu. Periksa fuse kalau tiga-tiga pon tak nyala.
@@CTBLiew haah tak nyala 3 3 yang nyala cuma lampu merah A/C je. Fuse dekat bonet depan ye bos?
Fuse belakang glove box.
panel aircond myvi old T4.2 jugak ke bos?
Advise buka tengok samada sama warna.
All knob switch hve the same way to open it is it?
This one from Toyota made.
@@CTBLiew u mean this myvi knob type is the same with toyota made one?
Yg lampu gear knob tu pun sama ke jenis led dia?
Tidak ingat. Lama sudah buat. Rasanya bukan. Boleh buka tengok dulu confirm balik.
Lampu kecik tu ada jual di shope tak boss dan apa nama nya?
Myvi lagi best 2012 semua mentol pakai t4.2 ke?
Yes. Standard size.
@@CTBLiew yg gambar aircond ke muka/ kaki tu mentol sama jugak ke?
Yg saya punya sama mcm video bos cuma 1.3manual..kalo semua tombol tu pakai T4.2, sy oder shopee di China murah skit
For the fan speed control, is it the same?
Yes indeed.
3 panel tu pakai t4. 2 ke boss
Ya. Betul.
boleh guna T4.7 boss?
I don’t think it will fit. T4.2 size is brown.
Mana nk dpt mentol dy..dkt d.i.y xde jual ke??
Online murah.
myvi lagi best什么灯脚
Those brown color lamp holder comes with halogen bulb. You may buy online with T5 halogen lamp as keyword. Refer 3:28th minute for an idea. It does not comes with the green sleeve. Remember do not lost the green sleeve!
T5bulb 灯脚一起来。
Just sent my car to repair the aircon and all the lights on the aircon swtiches are not on, but they work perfectly find controlling the aircon. What would be the problem? any wire not connected?
It is all light is not on but the air- conditioning is working perfectly fine?
Very rare all three light bulb fused at the same time. Maybe the fuse is blow. Advise to sent it back to the shop for warranty.
@@CTBLiew yea all 3 switches working fine only no lights on, only realised when i drive just now in the late evening. Fuse problem? Since its only one socket and wire insertion ya? Where's the fuse to this matter? TQ for the swift reply! : )
Just want to be cleared if it is working before sending it to the workshop for repair?
@@CTBLiew yes its working before sending to the aircon workshop the night before. Is there any relay or fuse for the lights for 3 of the aircon switches or the technician forgot to plug in some wire?
Dekat mana Ada jual led tu
Saya beli dari Shopee.Cari T4.2 bulb dengan tapak coklat.
t 4.2 bnyk yg led boss... yang bulb mana mau cari?
Bulb yang datang dengan brown base.
Saiz bulb brpa bos jnis t5 ke?
T5 is the size model.
pls do for myvi old sir 🙏🏻
Good news!
Does your panel looks like this?
th-cam.com/video/-nKBls9eZFk/w-d-xo.html
Someone did that in the past for your reference.
Myvi icon size??
Myvi lagi best size.
Macam bnyak kna blajar lgi formen ni...
Ni TH-camr cari content. Subscribe channel tengok banyak lagi.
T4.2 pakai brp biji bos?
Satu switch satu biji.
@@CTBLiew ohh so total 3 biji la?? Dkt lampu meter pakai t4.2 jgk ke?
Yes. Tiga. Depan lampu belum cuba, tak tahu.
@@CTBLiewohh hehe ok.. nnti buat video utk lampu meter bos 😁🙌
Good idea.
Why you shaking bro. Overall not be focus process. Just focus you are shaking
Unable to set tripod in tight spaces. One hand holding the camera while another hand try does the repair. Is not easy to get those shots.
aduh, looks not so easy, confirm sweat to change this bulb. 😬😬
Indeed.
apa punya design lah , tak friendly langsung untuk pergantian mentol ni
Nampak seamless
Aishh sush gk ea.. Takot rse nk buka
Tonton tiga kali. Boleh punya. Kalau ada lampu rosak.
Why hands are shaking💀
Back then went I still can’t afford a camera rig until quite recently bought one. Thanks to all support from my viewers. Should have more stable videos since then.
Why you shaking
Tight space unable to place a camera holder.
It was a tight space that is impossible to mount a camera there. Hope you will understand.