The varied life of a jobbing plumber

In todays video I replace a flush valve on a toilet, change an old Worcester heat slave oil boiler and install some remote sensing thermostatic radiator valves. I show you some plumbing tips and tricks along the way to hopefully make life easier.
As always, thanks so much for watching, all the support is greatly appreciated
#apprentice #plumbing #plumber #dayinthelife #oil #boiler

[@GasmanChris5705]

Top vid as always mate, Jacob in great hands 👊

[@PlumbLikeTom]

Thanks for the support as always Chris

[@ryandow3954]

Hope you enjoy your holiday mate, you've well and truly earned it! 😊

[@PlumbLikeTom]

Thanks for the support as always Ryan

[@FrankieBoy-wn6qt]

another good video m8t knowledge is key ..enough said …👌👌👌

[@PlumbLikeTom]

Thanks for the support as always mate 👍

[@andyfadian]

Nice selection of jobs Tom, hope you have a peaceful week. 👍 Thanks for all the efforts you put in to your channel

[@PlumbLikeTom]

Thanks for the support as always Andy 👍

[@glynstorer3269]

Enjoy your break mate

[@FrankieBoy-wn6qt]

It’s good your having a break m8t you need it…so when you go switch OFF…….have a good one m8t..👍👍👍

[@pookievision]

Had a repair today that stumped me! Viessmann (eww) system boiler S-plan! Dhw or ch on its own worked fine! Both on same time the boiler temp shot up and kept knocking off...was like 🤔 started when new cyl was put in...figured out no gate valve on flow to cyl = water was finding quickest route when both demands on and going to cyl and coming back hot af...new gate valve, sorted! ✌️ learned summin new! 🤯

[@PlumbLikeTom]

Pleased you got it sorted mate, it's sometimes those jobs where you need a crystal ball to know what the last person had done, thanks for watching

[@d4dek130]

Very interesting and informative video Tom , pleased you are having a holiday mate ,you deserve it .

[@PlumbLikeTom]

Thanks for the support as always mate, I'm looking forward to getting away

[@porkbap55]

Close to 10k you should have 50k subs mate Jacobs gonna be a good engineer after all your training top channel this good on ya on a holiday when I was self employed I didn't have one for getting on four years never seem to have time best thing I did enjoy Tom

[@PlumbLikeTom]

Thanks for the support as always mate, I haven't had a holiday in 5 years, it's difficult to switch off but I'm sure it will be ok for a few days

[@maxnavsa4470]

You made a complicated oil boiler installation look very easy. Great work! Come on Tom, highly skilled plumbers like you are minting it, get yourself a nice exotic luxury holiday, some where like Dubai? You deserve it for all the hard work you do. And well done for resisting to poke your eyes with your fingers 😀

[@PlumbLikeTom]

Thanks for the support as always Max, going abroad is something that's never really bothered me, I'm just happy to have a few days somewhere and relax

[@GotMoreCakes]

Great to hear you're having a break in Wales and not think about work for a bit. Whilst you're over here would you mind popping in and taking a look at my leaking tap too, cheers!

[@PlumbLikeTom]

Thanks for the support as always mate, I've actually got a commercial job on the go in Wales at the minute, its all fusion pipework

[@peterdawson5115]

Pleased your getting a holiday Tom, well deserved, you work hard and everyone needs a break, another tidy install , that story about the lad in bed whilst doing that combi swop, the things we plumbers tolerate, unbelievable but made me chuckle 😂 take care 🚽👍

[@PlumbLikeTom]

Thanks for the support as always Peter, I couldn't believe he never got up, if I had someone coming over I would make sure everything was perfect in my house, some people just aren't bothered

[@stephenedwards9872]

I do love your videos straight into info without advertising products

[@PlumbLikeTom]

Thanks for the support as always Stephen, I'm so pleased you are enjoying the videos

[@ianc8814]

We gotta get you to that 10k Tom!

[@PlumbLikeTom]

Getting closer every day, another couple of months and we should be there, thanks for watching as always 👍

[@diddywright6165]

Good content as usual Tom, glad to hear you’ve booked a holiday, I’m not having one this year as I’m too busy! 😂

[@PlumbLikeTom]

Thanks for the support as always mate, I'm mad busy at the minute as well, I was worried the other week that work was slowing down a bit but it seems to have gone the other way, I'm not going until September so hopefully it should be OK

[@chrisholt2474]

Hi Tom, another great film and installation there thank you.
It’s great you have booked your holiday, it’s something to look forward to. Have a great week and take care Tom. 👍👍👍

[@PlumbLikeTom]

Thanks for the support as always Chris, I'm looking forward to getting away

[@laghribi_abdalkhder8792]

How are you I have missed you. Didn't you get out of filming? Kidding! (I wish you all the best and success in your life)

[@PlumbLikeTom]

Thanks for the support as always mate 👍

[@Questionablethings]

Quality work Tom, as always.

[@PlumbLikeTom]

Thanks for the support as always mate 👍

[@johnwaby4321]

Nice to hear you have booked a break Tom.
You have both done a great job on that boiler .
Keep up the good work 👍👍👍

[@PlumbLikeTom]

Thanks for the support as always John 👍

[@SteveHit1]

Very interesting video Tom - thanks.
You made a great job of sorting out that pipework mess around the oil boiler. My heart sinks when I see a load of copper joined with speedfit; it just looks bad as much as anything.
Two man soldering was impressive!
I suppose that’s a situation is when Yorkshire solder ring fittings are handy!
Great to hear you’ve booked a holiday!

[@PlumbLikeTom]

Thanks for the support as always Steve, Yorkshire are something I've never carried, like you say they do come in useful though, I'm looking forward to getting away

[@agaman3728]

Definitely a keeper that burner. Could get you out of a tight spot on a cold winters night that👍

[@PlumbLikeTom]

They are worth keeping if they are decent, I have a few good ones in my stores I can use in emergency's, thanks for watching mate

[@TomChapman-wv9iq]

You and Jacob make that soldering look soooooo easy lol

[@PlumbLikeTom]

It's just practice, mine has never been the neatest but it rarely leaks, thanks for watching as always Tom

[@tirvplumbing]

We go campong in South Wales every summer. Highly recommend it, there's some stunning little hidden gems to be explored. You're doing well with the running. I struggle in the week as I'm usually knackered after work too. 😂

[@PlumbLikeTom]

Thanks for the support as always mate, I'm looking forward to getting away, I've missed the last few nights of running due to the heat but I will try to do extra on the weekend

[@martinwright7093]

Good work again, Tom. Might be worth saving the diverter valve off the old Worcester, they’re getting really expensive now.

[@PlumbLikeTom]

Fair point mate, I haven't changed one in a while though but my look I will need one next week, thanks for watching as always Martin 👍

[@dannywilkins887]

👍🏻👍🏻

[@PlumbLikeTom]

Thanks for the support as always Danny 👍

[@garylatto4191]

Another great vid and workmanship 👏, where abouts in wales mate

[@PlumbLikeTom]

Thanks for the support as always Gary, somewhere near Caernarfon

[@pb9926]

Great video Tom 👍😎

[@PlumbLikeTom]

Thanks for the support as always Pb

[@Rich10000]

Slick fade jacob

[@PlumbLikeTom]

Thanks for the support as always Rich

[@Rich10000]

@@PlumbLikeTom thanks for the vid, loled at the end when you said had to do a job with a lad just in bed all day, have to do a lot of awkward stuff in the trades

[@bikerjon153]

As always fella

[@PlumbLikeTom]

Thanks for the support as always mate 👍

[@glynstorer3269]

Ive got man flu at the moment feeling like shite

[@PlumbLikeTom]

Hope you feel better soon mate, take it easy

[@JohnWatkinsUK]

Is the tubing on those remote TRVs not ripe for damage, or did someone come along after and put some protection/trunking in?

[@PlumbLikeTom]

The cables were all hidden behind the rad covers and the sensors just sat next to them with no wire showing. I thought I had filmed a finished one but couldn't find the footage, it was a bit of a mind numbingly job to be honest, thanks for watching 👍

[@ikeabuchi1]

Scraggerdapperdopifaction👌

[@PlumbLikeTom]

Thanks for the support as always mate

[@glynstorer3269]

What do you prefer gas or oil boilers

[@PlumbLikeTom]

Oil to fix, gas are easier to install due to the weight, thanks for watching as always Glyn

[@SuperWayneyb]

🤘😎🤘🫖☕️🍪🎥👍👍

[@PlumbLikeTom]

Thanks for the support as always Wayne 👍