Can I program the new fob without being near to the gate? I don't want to open the gate while programming it so if I do it while being on the other side of my house is that fine?
Hi Mahammad, Yes that's fine. When I program a new fob I'm either inside the building or off site altogether to prevent any possible interference from the gate itself. All the best
Hi Mahammad, Just replying to your message sent on 30th Oct at 15.44. Thanks for sending your video, I've had a look at it but it seems like you have made a slight error when trying to program. If you watch my video again and work through the steps slowly there's no reason why it wouldn't work for you. I know there are companies that charge between £30-£50 to program a fob, so just take your time and if you get it wrong it will allow you to try programming it again. All the best
@@diyshop839 yeah I realised I missed a step, when I held on the 2 buttons for a few seconds I was supposed to press button 1 or button 2 to program, I skipped that step and it didn’t program. All sorted now though, thanks!
Hello, thanks for the video, it's very clear. However, I am trying to clone from a different make of fob (it's the same 433.92 MHz frequency of the CAME). When I follow your instructions, which work up to the third and final instruction, where my CAME does not flash three times. Any help would be gratefully received. Thank you.
That probably won't work. Even though the frequency is the same, the code setting and transmitter protocol will not be equal from a different manufacturer.
Hi I tried to do this several times but the new CAME does not flash 3 times, the steady light goes off after 10s. So how can i program the new one? Thanks
I don't have a working/existing one, which is why I have bought a new one. The one I was issued has broken. How can I programme the new one, please, without having one to 'copy' from?
Hi Terrie, It would be easier if you knew someone who has a fob so you could copy it using my video. However, if that isn't an option what you would need to do is find the receiver and program the transmitter from that. To be honest it isn't something I have done myself, but I have looked in to it and found these 2 websites which I found most useful: www.retroremotes.com.au/wp-content/uploads/2016/10/CAME-TOP-432EE-REMOTE-CODING-INSTRUCTIONS.pdf www.remotecontrol-express.co.uk/remote+CAME+:+TOP432EE I hope this helps Mustafa
I am afraid this didn't work for me and I ended up wiping the code on the old transmitter. Eventually I found the written instructions on the Came website. They give a warning that you shouldn't press one button on the old transmitter (except for the time they say in the instructions). I think it would have been helpful if you gave this warning. Secondly, in their instructions they say to hold the two remotes 'nose to nose' at the point where the code is being transmitted. Rewatching your video I see you actually let the old one touch the new one (albeit from behind). Again I would have found it helpful if you made this explicit. Fortunately I had a third remote and following the instructions from the official website, it worked perfectly the first time.
Hi Michael, I'm surprised that this wiped the code on your old transmitter. I have programmed over one hundred of these remotes for customers and never had a problem. I've also received a lot of feedback that the video is very clear and concise and some of my followers actually avoid the Came website and watch my video for clearer instructions. Therefore, I'm really surprised on your feedback that the method hasn't worked for you.
Ours doesn't have the solid light after you select the one you are trying to program. It goes from rapid flash, select left or right, then the light just goes out
Hi Martin, I would just double check that your following the video correctly give it another go, If your not having any luck I would get new batteries and that should work.
Hi Bob, What I can say is that you must have done something wrong as I programme these on a regular basis and don't have any problems. There is a possibility that you could have got them the wrong way round when programming, or one transmitter is faulty, also the batteries could need replacing, however it's best to check the above first then I would suggest to borrow a transmitter, otherwise you would need to find the receiver and programme it from there. Hope this helps.
@@diyshop839 I probably did. Anyway I phoned up CAME and they sent me details on how to reset the fob from the actual electric gate itself. Involves a certain amount of dismantling of the gate mechanism to access the reset on the circuit board but hey, I got there...
Hi there, This could possibly be a newer version, so once programmed I would check that it works on your gate's/doors, then if not I would follow my video as per normal.
Hi there, What I would advise is to follow my video and see how your programmer works, this means that you may have a different format with the flashing light but the instructions regarding my video are the same.
Hi there sometimes it can be the battery that needs replacing even if you have a red light flashing if its not bright it means the batteries are on there way out.
Hi there, You would need to purchase a new one, and if your neighbour or work colleague has a existing one, then you can follow the same procedure in my video.
Everytime I get a new remote it’s straight back to your video. Many thanks!
Couldn’t figure it out from the instructions provided by CAME, so this video is super clear and helpful. Thank you!
Simple but well made video. It was such a great help. Thank you so much!
Dobrze pokazane szybkie kodowanie pilota i poprawnie działa
Brilliant, saved me time finding a manual 🙂
It worked perfectly! Thank you so much ..
Your a star ⭐️ thanks for that
Is these the rolling code ones?
Thankyou. I got the left hand button to work but the right one doesn’t. I’ll try again.
I don’t have a working fob after water got into box. Can I program a fob with box. Gates work fine with 3G switch and monitor system. Thanks
Hi there,
You can programme the fob from the receiver in the box,
alternatively you can do it as per my video.
Hope this helps.
Is this the same procedure for the Came 806TS-0270 Rolling Code Remote, thank you
Hi John
That's something I haven't done, so I'm not sure if that will work, sorry that I can't help on this occasion.
Top bloke, the written instructions with the fob were hopeless.
000
Can I program the new fob without being near to the gate? I don't want to open the gate while programming it so if I do it while being on the other side of my house is that fine?
Hi Mahammad,
Yes that's fine. When I program a new fob I'm either inside the building or off site altogether to prevent any possible interference from the gate itself.
All the best
Hi Mahammad,
Just replying to your message sent on 30th Oct at 15.44. Thanks for sending your video, I've had a look at it but it seems like you have made a slight error when trying to program. If you watch my video again and work through the steps slowly there's no reason why it wouldn't work for you. I know there are companies that charge between £30-£50 to program a fob, so just take your time and if you get it wrong it will allow you to try programming it again.
All the best
@@diyshop839 yeah I realised I missed a step, when I held on the 2 buttons for a few seconds I was supposed to press button 1 or button 2 to program, I skipped that step and it didn’t program. All sorted now though, thanks!
Hello, thanks for the video, it's very clear. However, I am trying to clone from a different make of fob (it's the same 433.92 MHz frequency of the CAME). When I follow your instructions, which work up to the third and final instruction, where my CAME does not flash three times. Any help would be gratefully received. Thank you.
That probably won't work. Even though the frequency is the same, the code setting and transmitter protocol will not be equal from a different manufacturer.
Thank you very much for taking the time to answer, much appreciated.
Hi I tried to do this several times but the new CAME does not flash 3 times, the steady light goes off after 10s. So how can i program the new one? Thanks
Hi there,
What I would advise is to use the same method, don't worry about the flashing,
but the process should be the same.
All the best.
Why do you need to do left and right buttons?
Do you need to be near the receiver to do this?
I don't have a working/existing one, which is why I have bought a new one. The one I was issued has broken. How can I programme the new one, please, without having one to 'copy' from?
Cancel that. I've got it sorted by asking a neighbour if I can use theirs. But thanks anyway.
how do you program the new transmitter if the old one not working
Hi Terrie,
It would be easier if you knew someone who has a fob so you could copy it using my video. However, if that isn't an option what you would need to do is find the receiver and program the transmitter from that. To be honest it isn't something I have done myself, but I have looked in to it and found these 2 websites which I found most useful:
www.retroremotes.com.au/wp-content/uploads/2016/10/CAME-TOP-432EE-REMOTE-CODING-INSTRUCTIONS.pdf
www.remotecontrol-express.co.uk/remote+CAME+:+TOP432EE
I hope this helps
Mustafa
I am afraid this didn't work for me and I ended up wiping the code on the old transmitter. Eventually I found the written instructions on the Came website. They give a warning that you shouldn't press one button on the old transmitter (except for the time they say in the instructions). I think it would have been helpful if you gave this warning. Secondly, in their instructions they say to hold the two remotes 'nose to nose' at the point where the code is being transmitted. Rewatching your video I see you actually let the old one touch the new one (albeit from behind). Again I would have found it helpful if you made this explicit. Fortunately I had a third remote and following the instructions from the official website, it worked perfectly the first time.
Hi Michael, I'm surprised that this wiped the code on your old transmitter. I have programmed over one hundred of these remotes for customers and never had a problem. I've also received a lot of feedback that the video is very clear and concise and some of my followers actually avoid the Came website and watch my video for clearer instructions. Therefore, I'm really surprised on your feedback that the method hasn't worked for you.
@@diyshop839 I can only relate my experience which may prove helpful to some others. Thank you for your reply.
@@diyshop839 It just worked for me on 29 Aug 2024
You are amazing
Do you know if you can clone a came topd4rks remote to a Top432ee?
Hi there,
I've only ever done like for like
transmitters, so I don't know if that would work.
Hello, can i clone the code from 432M to 432EE using the same procedure?
Hi there,
Yes you can as it has the same frequency 433.92MHz
Will this copy a rolling code?
Hi there,
If you have a existing remote fob it will duplicate it exactly.
@@diyshop839
The new remote is came fixed
The original remote is sea rolling type
Doesn't copy
hello, do you know how to program a new CAME ATPD4 pls ?
No sorry,
but you should be able to download the pdf from the Internet.
Ours doesn't have the solid light after you select the one you are trying to program. It goes from rapid flash, select left or right, then the light just goes out
Hi Martin,
I would just double check that your following the video correctly give it another go,
If your not having any luck I would get new batteries and that should work.
I did this and now neither of my remotes work. How do I reset the 'working' one that now no longer works?
Hi Bob,
What I can say is that you must have done something wrong as I programme these on a regular basis and don't have any problems.
There is a possibility that you could have got them the wrong way round when programming, or one transmitter is faulty, also the batteries could need replacing, however it's best to check the above first then I would suggest to borrow a transmitter, otherwise you would need to find the receiver and programme it from there.
Hope this helps.
@@diyshop839 I probably did. Anyway I phoned up CAME and they sent me details on how to reset the fob from the actual electric gate itself. Involves a certain amount of dismantling of the gate mechanism to access the reset on the circuit board but hey, I got there...
Hi Bob,
I'm glad you have found a solution.
All the best
Mustafa
My transmitter light goes from blinking rapidly to nothing instead that the light stays onif you press left or right
Hi there,
This could possibly be a newer version, so once programmed I would check that it works on your gate's/doors, then if not I would follow my video as per normal.
@@diyshop839 But i can't program it if the light doesn't stay on after blinking can't i?
Hi there,
What I would advise is to follow my video and see how your programmer works, this means that you may have a different format with the flashing light but the instructions regarding my video are the same.
Followed instructions to the letter.
Fob still doesnt work
Hi there sometimes it can be the battery that needs replacing even if you have a red light flashing if its not bright it means the batteries are on there way out.
Seems simple but my transmitter has no lights.
what if the old one is broken? How do you set it up then?
Hi there,
You would need to purchase a new one, and if your neighbour or work colleague has a existing one, then you can follow the same procedure in my video.
Addressing type remote
Thanks
السلام عليكم ارجو عمل فيديو لطريقة توصيل الماتور كاملة لانى وصلتة وبرمجتة ولا يعمل علما بأن كل شيء على. الرسم صحيح
Zia