My grandfather was very poor. He lost both legs to surgical amputation just below the knees as a middle aged man, before I was born. He cut pieces of old tires and put straps on them. He put his knee nubs in them with his pants legs folded around the nubs. He strapped the tires to the nubs and walked everywhere anyone else could buy on his knees. The only way I ever knew him.
you said it right..in the 80's, 90's things are made to last but now they intentionally make things to fail periodically to buy parts for repair or buy a new unit again..business strategy
The army dose this with their standard issue boot. Its not very comfortable last long but not best for day to day wear. The reason why things don’t last come down to convenience. People would rather buy a new thing than wait for it to be repaired as it faster and cheaper for them. Things dont last because we value comfort over durability and repair dose not have the financial benefit as it did
My grandpa that lived thru the depression but still had quite a bit of money used to trace his shoe out on an old tire, cut it out and glue it on, said them tires have another 50k more miles left on them. He was the king of rigging stuff. Probably why they had money though.
We must repair things and must be used upto it's limits and shouldn't throw things away for minor issues, so in that way we can reduce our waste and save a lot of money for better use. Craftsmanship and repairing things must be taught in schools like any other subjects.
good idea, excellent craftsmanship. I’ll bet the shoes weigh twice as much as they did if not more..Not good for tennis or basketball or running anymore, but for walking and general use, they will probably last as long as the tops of the shoes do
Это видео сделано для просмотров Ютуба и не более, в практике подошва скоро отпадёт, слишком толстая резина для подошвы. Во вторых, в этих кедах ткань начинает отрываться от резины на месте сгиба, раньше чем стирается подошва.
great video 😃. I do it but with bicycle wheels. I first started to fix my shoes and over time I did it for those who needed it and it is a great way to recycle and on the other hand to reuse objects.
I met a Maasai tribesman in Tanzania many years ago wearing sandals made from old tyres...I commented on them and said I liked them...He asked me if I wanted to swap...I was wearing expensive hiking boots...I didn't swap...Many of the men were wearing them and the straps that tied the sandal to the foot were made from the tyres too...reminiscent of the roman caligae...
You can only make shoes with tires that are really cheap. Maybe these are more common in some countries, but in most first world countries tires have an embedded steel mesh that would cut the hell out of your feet.
Hice el mismo trabajo aqui visto en el tenis de mi hijo que estaba con un gran agujero en la suela. Primero la lijé bien, a mano mismo ya que no tengo lijadera de zapatero (hasta me dolió el brazo). Despues pegué un EVA en la suela del tenis y a seguir pegué la misma suela con un material tipo latex. Quedó perfecto. Trabajo altamente profesional.
It would be a good use for those mountains of old used tyres around the world that catch fire, but apparently the tyre rubber has chemical compounds that are bad for your health and the environment as the material breaks down and releases gases.
Wow !!! Nice restoration. Funny is the owner’s feet will soon retire and gone but the shoes will live on to the next in throne and so on and so forth outlasting other shoe brand. 😳😁😩👍🤣👍
@@michaelw1669 I got mines at Ross in Las Vegas, about a decade ago. I can't even tell you what the name of the company is. The fabric feels like hemp or something similar. I got a plaid and medium blue pair. People always ask me about them, when I wear them. They are still in excellent shape.
@@EliosMoonElios -There must be some old tires laying around. Maybe she can do it herself or get someone to do it. You seldom see shoemakers today. (depending on where you live ) Who knows, maybe she can start at business. Don't forget the glue. 👌
That is a one thing and also it might die wearing uncomfortable as fuck shoe made out of reinforced rubber that doesn’t bend. But we all know that money over there matters more than life so to buy a shoe cost a fortune.
Digging out abundance of matchless video really appreciate your courageous effective way of success in your activities impressive stay blessed friend 🙄❤️❤️❤️❤️
We had cobblers repairing soles with tyre rubber .. but now most prefer buying a new pair . We had even Aeroplane tyre soles that will not wear off at all ..
"What boots you got on?" "Firestone" Lmao, I did this with a pair of old rain boots in the winter one time when my special $400 snow boots were skating all over the driveway.
ye aapne solution kya lagaya center me.. aur kitna sahi vedio download kiya thanx sir salute ..main hamesha clarks ke shoes pahnti hun.bade mahnge hote hain..4.5 saal aram se chalta hai..uske baad sole gis kar tut jata hai..koi banke nhi deta tho fenk na padta hai..jabki wo upar se achha rahta hai...main industries me kaam karti hun wahan is tarah ki machine hoti hai..abhi ak shoes hai use try karungi banane kain solution pls bata dena pls.
Necessity is the mother of invention, when we're kids we find things and make stuff, we make do, this is bred out of us, or kicked, by the wasteful, ungrateful consumerist economy, so great to see you doing this, I have a good pair of sketchers from 2004, never wore them until now, the soul is wearing and a lot of today's shoes are just sh*te, this is an amazing video, I can make any pair of shoes I like, LAST NEAR FOREVER! Goodbye corporate greed...I'll just keep the shoes I like thank you very much.....have a fun day buddy!
Tutorial magnífico o para fabricantes de calzado porque a una persona normal queda difícil comprar todo ese herramienta pulidora de motor resultaría más costosa la herramienta que los que los mimos tenis
@@javiervegas5482 si el cuchillo también queda incluido y las herramientas de todas maneras para el que tenga zapatería fábrica de calzado es un tutorial magnífico
*TRABAJE DURANTE AÑOS EN UNA FÁBRICA DE CALZADO Y APRENDÍ TODO LO QUE SE DEBE HACER PARA CONFECCIONAR UN BUEN ZAPATO* *LO QUE HIZO ESTE SEÑOR ESTÁ MUY MAL ECHO , A PESAR DE SU BUENA INTENCIÓN* *ESAS ZAPATILLAS VAN A DURAR LO QUE DURA UN HELADO* *PARA PEGAR SUELAS , PRIMERO QUE NADA , HAY QUE ENCEMENTAR LAS PLANTILLAS QUE SE VAN A USAR Y SE DEJAN CON EL PEGAMENTO POR LO MENOS DOS DÍAS SIN MANIPULAR EL MATERIAL* *CUANDO SE COMIENZA EL TRABAJO DE PEGADO. LAS PARTES QUE TIENEN PEGAMENTO SE COLOCAN EN UN ARTEFACTO QUE EMITA CALOR. COMÚNMENTE SE USA UN ANAFRE ( las que llevan un micron ) SE CALIENTAN PARA ACTIVAR EL PEGAMENTO Y LUEGO SE UNEN LAS DOS PARTES CON EL PEGAMENTO CALIENTE* *A ESTO SE LE LLAMA* *PARCHES CALIENTES* *Y UNA VEZ ADHERIDAS LAS DOS PARTES SE COLOCAN EN UNA PRENSA QUE ASEGURA LA ADHERENCIA* *UNA VEZ FRIO EL PRODUCTO SE PROCEDE AL RECORTE MANUAL Y DESPUÉS POR LA LIJADORA* *PRODUCTO CASI ETERNO* *ESA ES LA FORMA CORRECTA* 😀👍
My grandfather was very poor. He lost both legs to surgical amputation just below the knees as a middle aged man, before I was born. He cut pieces of old tires and put straps on them. He put his knee nubs in them with his pants legs folded around the nubs. He strapped the tires to the nubs and walked everywhere anyone else could buy on his knees. The only way I ever knew him.
Damn, what a legend.
Every shoe company can build long lasting soles with tyre quality rubber, but their factories will shut down.
you said it right..in the 80's, 90's things are made to last but now they intentionally make things to fail periodically to buy parts for repair or buy a new unit again..business strategy
They already do......used rubber is used in TPR sole
The army dose this with their standard issue boot. Its not very comfortable last long but not best for day to day wear. The reason why things don’t last come down to convenience. People would rather buy a new thing than wait for it to be repaired as it faster and cheaper for them. Things dont last because we value comfort over durability and repair dose not have the financial benefit as it did
@Mentari 1981 cnari0sestranjer0s
Skechers Goodyear collaboration is from that Idea
My grandpa that lived thru the depression but still had quite a bit of money used to trace his shoe out on an old tire, cut it out and glue it on, said them tires have another 50k more miles left on them. He was the king of rigging stuff. Probably why they had money though.
Ur gramps sounds like a rly cool guy
Umm...Penny saved is penny earned that's all i can say
"Mend and make do! "
also its fun to repair your own stuff
Aí sim
We must repair things and must be used upto it's limits and shouldn't throw things away for minor issues, so in that way we can reduce our waste and save a lot of money for better use. Craftsmanship and repairing things must be taught in schools like any other subjects.
Yes we all love some rubber in our air and all around us. Mmmmmmm microplastic
I tried this with some old worn shoes, the problem was lack of groundwork. Thanks, this shows how it can be done!
good idea, excellent craftsmanship. I’ll bet the shoes weigh twice as much as they did if not more..Not good for tennis or basketball or running anymore, but for walking and general use, they will probably last as long as the tops of the shoes do
Weight lifting, better foot gripping.
Удивил большой расход материала. Не экономит мастер клей и резину. Супер. Сделаю и я так)
С начало покрышки без корта найти надо ;)
А меня что перед склейкой не обезжирил подошвы.
Да и протектор у кед был как новый.
Это видео сделано для просмотров Ютуба и не более, в практике подошва скоро отпадёт, слишком толстая резина для подошвы. Во вторых, в этих кедах ткань начинает отрываться от резины на месте сгиба, раньше чем стирается подошва.
I felt the same. It looked like you could get 4 shoe soles out of the material.
Мужик молодец, дай бог здоровье ему и его семье. Просто супер...
great video 😃. I do it but with bicycle wheels. I first started to fix my shoes and over time I did it for those who needed it and it is a great way to recycle and on the other hand to reuse objects.
Awesome
Same like me..i use bicycle wheels too👍
هذا.يليق.طراف.في.الاسواق.الاسبوعية.القروية.تاع.اامروك.واوووواوايحصد.الكرعة.في.دكااة.
Recycling is reusing objects.
Do you also use some white sheet between the old shoe and the tire? If yes, what is it and where to find some? Thanks a lot
I met a Maasai tribesman in Tanzania many years ago wearing sandals made from old tyres...I commented on them and said I liked them...He asked me if I wanted to swap...I was wearing expensive hiking boots...I didn't swap...Many of the men were wearing them and the straps that tied the sandal to the foot were made from the tyres too...reminiscent of the roman caligae...
You can only make shoes with tires that are really cheap. Maybe these are more common in some countries, but in most first world countries tires have an embedded steel mesh that would cut the hell out of your feet.
Hice el mismo trabajo aqui visto en el tenis de mi hijo que estaba con un gran agujero en la suela. Primero la lijé bien,
a mano mismo ya que no tengo lijadera de zapatero (hasta me dolió el brazo). Despues pegué un EVA en la suela del
tenis y a seguir pegué la misma suela con un material tipo latex. Quedó perfecto. Trabajo altamente profesional.
👍👍👍👍♥️♥️♥️
Uma atitude que ajudar reduzir nossa pegada na natureza. Um brasileiro que ama cuidar do nosso planeta.
Shoemakers in the Philippines has been using old tires as shoe soles and sandals for more than 40 years.
Same in Thailand.
In México sierra natives make sandals out of tires aswell since a long time ago
It would be a good use for those mountains of old used tyres around the world that catch fire, but apparently the tyre rubber has chemical compounds that are bad for your health and the environment as the material breaks down and releases gases.
What material did you use between the tire and the sole? This is an awesome idea! Thx for demonstrating!
Sir YOURE THE MAN ..👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏 shoe makers don't do it here in the USA it would cheaper than buying new converse ...good job
Your shoe working over westage and solition heavy loss over tyre weight. FROM TAMIL NADU,INDIA👍
Thank you very much 🙏🏼🙏🏼🙋 Love♥️ India from 🇮🇩 Indonesia
@@Banbekaskerajinan I love Indonesia , they know their roots and love their culture
What is the white stuff you glue it to I love your video@@Banbekaskerajinan
Great video, so clear!
juda azhoyib vedeo bulibdi 👍👍👍👍👍👍👍
Wow !!! Nice restoration. Funny is the owner’s feet will soon retire and gone but the shoes will live on to the next in throne and so on and so forth outlasting other shoe brand. 😳😁😩👍🤣👍
Puros yordan felicidades pocos como usted 👏👏😇😇😇
Beginners level but practice makes the person a expert, keep going have a long road ahead but you have made the most important fact: beggin.
MY BROTHER THAT IS GENIUS WOOOOWWW!!!! I REALLY LIKE HOW U DUD THAT..... VERY VERY GOOD...VERY CREATIVE N TALENTED....BYE!!
Кеды весом как водолазные ботинки , прикольно , как самолёт на гусеничном ходу .
Absolutely love the idea
отличная идея! но для удобства резки , лезвие втыкайте в стол вертикально и режьте подошву двигая обувь!
♥️♥️👍👍👍
NOOOOOOOO HE GLUED ONE OF THE SHOES ON BACKWARDS SO NOW 1 HAS FORWARDS TREAD AND 1 HAD BACKWARDS TREAD :(
Nice movie! Good job!
Я обычно на валенки тёще кразовские пришиваю
I own 2 pairs of shoes were the tire threads. I love them!
Where did you get them I can't find a cobbler to do it in the US?
@@michaelw1669 I got mines at Ross in Las Vegas, about a decade ago. I can't even tell you what the name of the company is. The fabric feels like hemp or something similar. I got a plaid and medium blue pair. People always ask me about them, when I wear them. They are still in excellent shape.
The idea origionallycame from Vietnam they are called Ho Chi Minh sandals.
Эти тапки, сами по себе тяжёлые, а с такой доработкой это уже не обувь, а тренажёр для накачивания ног...
Молодец хорошо правильно да точно 🎉🎉🎉
Ahora son a todo terreno off the road 👍👍👍
Had that done to my Clark's in the 60's
Looks much stronger than the original. The owner might die before the sole wears down.
My sister complain cause nowadays shoe's sole wear to fast so I suggest her to take her shoes to a shoemaker and get work boot's soles on it.
@@EliosMoonElios -There must be some old tires laying around. Maybe she can do it herself or get someone to do it. You seldom see shoemakers today. (depending on where you live ) Who knows, maybe she can start at business. Don't forget the glue. 👌
That is a one thing and also it might die wearing uncomfortable as fuck shoe made out of reinforced rubber that doesn’t bend.
But we all know that money over there matters more than life so to buy a shoe cost a fortune.
What was the whit white material you used to stick the tyre sole too?
Great recycling!!! Thanks!
Thank you very much ♥️♥️🙏🏼🙏🏼🙏🏼
Thank you, brother!
Where do you find a large bottle of the glue?
Boa noite sou do Brasil vc e um gênio se fosse aqui no Brasil eu pagava pra fazer pra mim sou de João pessoa PB.
Interesting to see NEW TYRE treads. Not knocking the in ovation.
When I was a kid my dad done that to our clogs in Sweden lol made them last longer that's for sure
👍👍👍😜🏴🦕🦄😁✌🤞
Jag vill testa detta, men hittar inte vilket lim som skulle funka! Vet du? :)
@@nejtackfu my Svenska is to rustie to remember it its been 40 years since I spoke Swedish. Am sorry to say I have forgotten most
👍👍👍😜🏴🦄🦕😁✌️🤞
Digging out abundance of matchless video really appreciate your courageous effective way of success in your activities impressive stay blessed friend 🙄❤️❤️❤️❤️
Thank you very much ♥️♥️🙏🙏🙏
Из какого материала сделана подошва!?
Non slip good on ice and wet,A useful way ,to recycle tires ,and save the planet.!
We had cobblers repairing soles with tyre rubber .. but now most prefer buying a new pair . We had even Aeroplane tyre soles that will not wear off at all ..
Hell yeah 💪 thanks for sharing...
Hadir nyimak sahabatku
Makasih mba.... ♥️♥️♥️♥️🙏🙏🙏
भाई, काम आपने किया, मजा हमे आया। भाई वाह।
Nice Products!!
Opposite-directional semi-platform all-weather custom-made soles!
Great job though!
🙂🙂🙋🙋👍👍👍🙏
This is a clever design, except for when original plastic finally unglues from the original fabric after more use
What's the white material?
Skeet
Muy buen trabajo.excelente..esa suela blanca q utilizas q material..es..
Todo terreno 😆✌️
Very good😀🤗👍
WounderfullArt thanks brother!!
Mexican style he he, in Mexico we make sandals out 9f tires as well...They last forever, some have been known to outlast the owners.
Meskipon dgn alat yg sederhana ternyata hasilnya bagus sekali cocok untuk dipelajari
Nggiih.... Monggo dipraktekkan 👍👍
He got them Goodyear All Stars
Such shoes mostly break on the edges where the gum connects with fabric. I see no point in reinforcing the sole.
Excellent point. Why do this to a shoe made of fabric?
I would attach it to leather and wear it for much longer
3R Bro... Reduce, Reuse, Recycle. Do your part to save the environment even though how small it is...
As someone who has a hole in every fucking right sole from braking on a skateboard, I'm gonna agree to disagree.
No GD brakes on fckng bike,this sht will be awesome dudes!!HS and HF even.....
Tienes razón y se romperán más rápido si la suela es más pesada
That's cool
Nice work, but please use gloves for the sander
You could put the shoes, side by side and save more rubber.
He is using that method to get best paired texture of the rubber, and thats only on the center.
@@jatimyw so bad they did not face the same way
Nicely done 👍👍👍
Nice job, you made it look easy. Loved the music in the background, Rockin chair, by by Unicorn Heads👍🏽👍🏽👍🏽😉
🤝 👍👍👍 Thank you
It's cool to be a platform shoe with old tires ♪ I want it
Hasilnya sangat menarik dan bagus👍👍👍
they look good
Omg...Good idea 😅
Qe super. Saludos desde Bolivia broo
Lovely! I had a pair of shoes fixed like this and I scoffed--but they were wonderful. ❤
This is awesome, I'd like to use tire rubber for a pair of boots I'm working on!
Great video. i like these shoes
Saludo ako sa mga katulad nyo sir.. God bless
"What boots you got on?"
"Firestone"
Lmao, I did this with a pair of old rain boots in the winter one time when my special $400 snow boots were skating all over the driveway.
Здорово придумал 😁👍
Very good work
Excelente vídeo. Adorei. Parabéns.
3R... Reduce, Reuse & Recycle. Do your part to save the environment no matter how small it is...
I like the work
Hey me gusta eso 😀😀😀😀😀
******good job. Indian jugaad 😜😜😜😜😜******
Awesome job!
О, да, нам скоро это пригодится!
Muito bom só que você usou muito seu material daria para outro par de sapato obrigado
Well that answers so many questions
Keren, alangkah lebih kuat lg kalau dijahit solnya om...
ye aapne solution kya lagaya center me.. aur kitna sahi vedio download kiya thanx sir salute ..main hamesha clarks ke shoes pahnti hun.bade mahnge hote hain..4.5 saal aram se chalta hai..uske baad sole gis kar tut jata hai..koi banke nhi deta tho fenk na padta hai..jabki wo upar se achha rahta hai...main industries me kaam karti hun wahan is tarah ki machine hoti hai..abhi ak shoes hai use try karungi banane kain solution pls bata dena pls.
Отлично но я заметил что ресунок подошвы смотрят па разному кагда клеиш ставь обувь в одном направлении тогда ресунок будет пахожий
Necessity is the mother of invention, when we're kids we find things and make stuff, we make do, this is bred out of us, or kicked, by the wasteful, ungrateful consumerist economy, so great to see you doing this, I have a good pair of sketchers from 2004, never wore them until now, the soul is wearing and a lot of today's shoes are just sh*te, this is an amazing video, I can make any pair of shoes I like, LAST NEAR FOREVER! Goodbye corporate greed...I'll just keep the shoes I like thank you very much.....have a fun day buddy!
Muy bueno....aunque desperdicio material....y no se x q le puso ese material intermedio salvo q no sea muy aderente goma a goma?. 👆🏻👆🏻
Tutorial magnífico o para fabricantes de calzado porque a una persona normal queda difícil comprar todo ese herramienta pulidora de motor resultaría más costosa la herramienta que los que los mimos tenis
si y tambien se necesita un super cuchillo de titanium para hacer ese corte jjjjjjjj
@@javiervegas5482 si el cuchillo también queda incluido y las herramientas de todas maneras para el que tenga zapatería fábrica de calzado es un tutorial magnífico
@@lonjaturqueza1748señor, el trabajo profesional compensa. Buen trabajo profesional
Han quedado perfectas para un cojo que arrastre el pie. Hasta el mantenimiento de los próximos 20,000 km.
Le diste una nueva vida a esos pobres zapatos😅👟👟
😊😊😊♥️♥️♥️🙏🙏
Zapatillas para otros 10 años. 💪👏👏
Motorcycle tires would be better?
Very neat but only as good as that thin layer of glue 🤔🤔🤔🤔
Wonderful . I like
I have done this with shoes before but to get best results you should do it on NEW shoes before they wear down.
*TRABAJE DURANTE AÑOS EN UNA FÁBRICA DE CALZADO Y APRENDÍ TODO LO QUE SE DEBE HACER PARA CONFECCIONAR UN BUEN ZAPATO*
*LO QUE HIZO ESTE SEÑOR ESTÁ MUY MAL ECHO , A PESAR DE SU BUENA INTENCIÓN*
*ESAS ZAPATILLAS VAN A DURAR LO QUE DURA UN HELADO*
*PARA PEGAR SUELAS , PRIMERO QUE NADA , HAY QUE ENCEMENTAR LAS PLANTILLAS QUE SE VAN A USAR Y SE DEJAN CON EL PEGAMENTO POR LO MENOS DOS DÍAS SIN MANIPULAR EL MATERIAL*
*CUANDO SE COMIENZA EL TRABAJO DE PEGADO. LAS PARTES QUE TIENEN PEGAMENTO SE COLOCAN EN UN ARTEFACTO QUE EMITA CALOR. COMÚNMENTE SE USA UN ANAFRE ( las que llevan un micron ) SE CALIENTAN PARA ACTIVAR EL PEGAMENTO Y LUEGO SE UNEN LAS DOS PARTES CON EL PEGAMENTO CALIENTE*
*A ESTO SE LE LLAMA*
*PARCHES CALIENTES*
*Y UNA VEZ ADHERIDAS LAS DOS PARTES SE COLOCAN EN UNA PRENSA QUE ASEGURA LA ADHERENCIA*
*UNA VEZ FRIO EL PRODUCTO SE PROCEDE AL RECORTE MANUAL Y DESPUÉS POR LA LIJADORA*
*PRODUCTO CASI ETERNO*
*ESA ES LA FORMA CORRECTA*
😀👍