SimplyShade 11 Ft LED Lighted Cantilever Umbrella Build | Review

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ม.ค. 2025

ความคิดเห็น • 49

  • @jonmaroney1497
    @jonmaroney1497 3 ปีที่แล้ว +1

    Great video Thanks. The easiest way I found to insert the Pea gravel into the bases was using a large funnel. Look for a funnel with large opening at the top and bottom. Got mine at Auto Zone. You can also use water with the pea gravel for extra weight for high wind areas.

  • @Sablesez
    @Sablesez ปีที่แล้ว +1

    Thank you soon much for this video

    • @how2sreviews4
      @how2sreviews4  ปีที่แล้ว

      No problem Thanks for watching!

  • @kcordes3
    @kcordes3 3 ปีที่แล้ว +2

    Simple, straight forward, and to the point! Appreciate you taking the time to film, and post this how-to video. Just bought the exact same one a few moments ago and am relieved to see pretty good engineering, before setting up. (If my wife can ever figure out exactly where she wants it?) P.S. - to the 3 people that didn't like this video.....BITE ME!

    • @how2sreviews4
      @how2sreviews4  3 ปีที่แล้ว

      Thanks for the comment we will have many more videos to post!

    • @jackbrat81
      @jackbrat81 2 ปีที่แล้ว

      Thank you. Apparently my set of directions were not very clear on where to put the solar panel. Ha Ha Your review HELPED a lot! Thanks.

  • @W224
    @W224 3 ปีที่แล้ว +1

    Well done, thanks.

  • @fertexas
    @fertexas 3 ปีที่แล้ว +1

    Nice bbq grill

  • @thais3233
    @thais3233 2 ปีที่แล้ว

    Awesome video thank you

  • @drexxx9
    @drexxx9 3 ปีที่แล้ว +1

    Thanks for the video. For me, pouring the sand was a huge pain.
    Is there a proper way to close the umbrella? Cranking the opposite direction only goes so far, and there's nothing in the instructions.

  • @rrose002
    @rrose002 2 ปีที่แล้ว

    Perfect...thanks

  • @johnmeade3934
    @johnmeade3934 3 ปีที่แล้ว +1

    Do you notice any sway with the main beam (holding the umbrella) after installing? Just bough/installed and the main beam definitely shifts an inch or so in either direction.

  • @bigjon.6258
    @bigjon.6258 2 ปีที่แล้ว

    Thanks Bro.

  • @billycat2168
    @billycat2168 3 ปีที่แล้ว

    Great vid. One note. The instructions dont show it as having lightning. Im an idiot and took me a year to realize i had the solar panel left over.

  • @905whatsgood
    @905whatsgood 3 ปีที่แล้ว +1

    I am looking to buy this umbrella. Can you let me know how big the umbrella is? Diameter in Ft? I am not sure if I have enough space on my patio for it

    • @how2sreviews4
      @how2sreviews4  3 ปีที่แล้ว +1

      I will check tonight and let you know tomorrow

  • @johnrivera8009
    @johnrivera8009 3 ปีที่แล้ว +2

    Many reviews say the light cord is cut when the umbrella is turned around. Can you give any update on that defect?

    • @how2sreviews4
      @how2sreviews4  3 ปีที่แล้ว

      I have not had the issue at all I have rotated this many times with no problems. I think this has been corrected.

    • @TheDeepthi2010
      @TheDeepthi2010 3 ปีที่แล้ว +1

      Can you tell me what is the base you are using?

    • @how2sreviews4
      @how2sreviews4  3 ปีที่แล้ว

      This base came with my kit did yours not come with one?

    • @CMP216
      @CMP216 3 ปีที่แล้ว +1

      The put the swivel foot peddle back on the base instead of higher on the pole. This corrected the cut wire issue

    • @babyfat6677
      @babyfat6677 3 ปีที่แล้ว

      I was also worried about this defect, but still decided to pull the trigger! So glad that it was fixed and mine rotates very easily too

  • @codybarber5243
    @codybarber5243 3 ปีที่แล้ว

    Just bought this exact same one, had an awful time trying to get sand into the base pieces, couldn't get but a little over 3 bags into them

  • @antoineletts2151
    @antoineletts2151 3 ปีที่แล้ว +1

    Picking mine up from Lowe’s on Monday , can you tilt the umbrella once it’s open ?

    • @how2sreviews4
      @how2sreviews4  3 ปีที่แล้ว

      Yes absolutely! Good luck on the assembly

  • @jenaybyard9577
    @jenaybyard9577 3 ปีที่แล้ว +1

    Hello,
    When you put in the last 2 screws, your arm was in the way n I couldn't see what or where. N solar n electric was not clear. N I can understand not putting in the sand, but you could have shown me how. Other wise your video was fine.
    Thank You.
    Jenay ByArd

  • @CMP216
    @CMP216 3 ปีที่แล้ว +1

    I hear the sand can be a pain to put in the bases. What was your experience with this, any tricks you learned to help with this?

    • @how2sreviews4
      @how2sreviews4  3 ปีที่แล้ว +1

      Patience is about the only thing LOL. You Could also use a 5 gallon bucket with a smaller hole drilled into the bottom so you can rest it over the hole.

    • @jonmaroney1497
      @jonmaroney1497 3 ปีที่แล้ว +1

      The easiest way I found to insert the Pea gravel into the bases was using a large funnel. Look for a funnel with large opening at the top and bottom. Got mine at Auto Zone. You can also use water with the pea gravel for extra weight for high wind areas.

    • @WhitneyWorthyStyle
      @WhitneyWorthyStyle 3 ปีที่แล้ว +1

      We put sand in the base no issue - using a wide mouth canning funnel. Make sure to leave room for water freezing/expansion in the winter! Honestly the base takes the longest part.

    • @babyfat6677
      @babyfat6677 3 ปีที่แล้ว

      This comment helped us. We used a cut large coke bottle as a funnel. It definitely helped a lot

  • @robgirantino8843
    @robgirantino8843 2 ปีที่แล้ว

    Does anyone know how to replace the broken string?

  • @cshiroky8141
    @cshiroky8141 2 ปีที่แล้ว

    I'm having the same issue as others...this was once solid straight up with no leaning or swaying...now it's damn near falling over because of the pre-assembled hub...anyone know what to do?

  • @meme22752
    @meme22752 3 ปีที่แล้ว

    My solar lights have quit working after only three months. Any idea how to fix?

    • @roxannedziedzic728
      @roxannedziedzic728 2 ปีที่แล้ว

      Reach out to the company for the warranty, they will replace!

  • @jdgoodwin325
    @jdgoodwin325 3 ปีที่แล้ว +1

    Where is it made?

    • @how2sreviews4
      @how2sreviews4  3 ปีที่แล้ว

      I am not sure but my guess is China

    • @jdgoodwin325
      @jdgoodwin325 3 ปีที่แล้ว +1

      @@how2sreviews4 I'm trying to buy USA made only. Thanks for the information.

  • @rickcornish2363
    @rickcornish2363 3 ปีที่แล้ว

    We have this umbrella, purchased July 2019, and strong wind over time and a large storm caused the rotating hub at the base to break in half. Inside the hub, 3 large screws (longer than the 4 screws holding the hub onto the legs) sheared off. These internal screws were part of the pre-assembled hub as it came in the box. Do you know if that rotating hub can be purchased by itself? Some ball bearings spilled out also once the hub broke.

    • @cshiroky8141
      @cshiroky8141 2 ปีที่แล้ว

      Ball bearings fell out as well...help!!

    • @rickcornish2363
      @rickcornish2363 2 ปีที่แล้ว

      @@cshiroky8141 We ended up disassembling the hub and buying replacement bolts and ball bearings at a hardware store though paying attention to bolt and bearing specs important. The hub was back ordered by manufacturer. Reassembled, it’s so far so good.

  • @robertoleos6682
    @robertoleos6682 2 ปีที่แล้ว

    Anybody having issues due to metal base rust staining concrete floor?

  • @wnddyer
    @wnddyer 3 ปีที่แล้ว

    I wish I had saw your video first besides watching others. Nobody showed to put 2 screws in he base. When I tried to pull up on this umbrella to lift it, the entire pole came out of the base and crashed on the concrete. I had even put the solar disc on already and I'm surprised it didn't bust it. Luckily everything seems to be fine.

  • @Ezq95
    @Ezq95 2 ปีที่แล้ว

    I have the same one but, mine has the handle to turn the umbrella side to side. Made by Lowe's A.K.A. Allen Roth. Lowe's dropped the price b 50%