Standers are 9ft if never seen a 10ft one but I know what you mean how not to erect scaffolding when your boss is watching if I took that long to put that bay well let's say I'd be demoted to labourer lol
jimbob no it's count 1,2, and then three where the bar goes, and if you have a tall scaffold over 10 foot it's 1,2,3,then 4 where the bar goes then handrails then boards or metal pans then hand rails and knee rails, toe boards etc.
Am I missing something or did they not use a torpedo to level it? Also, go 3 cups up and place a hor on the 4th. This is different scaffold than what I do so I guess it's right?????
Since it’s concrete they just preset the jacks to the same height assuming concrete is level everything should be level also some places rules double wrap scaffold when beginning
dont know what country this is filmed in but... no handrail, brace, access or fully decked health and safety would have a field day on this and thats after they are done going over the ppe matter.
Poor! Both guys let the standards go. (they could fall at any time) the one closest to the screen forgot to open the cups to place the 1.3 transom in. All cuplock components were not in reachable distance. if that is a professional way to install cuplock god help the people who have done it that way. They made it look so hard.
Honestly this video is a disgrace they should have put the jack down and then the 5' bar and the 3' bar (sizes just guessing) next to the jack. Then put the leg on the jack and put both bars in the bottom cup and close it so it supports its self and you can keep building from there. The way how they set that up could have probably fell over on to some expensive equipment or could have hit a valve the made a gas leak depending on where you're working. Try again guys. Not this time.
![น้าครับ..ผมรักน้า EP.04 - ปีกแดงเดอะซีรีส์2024[ฟินมาก] บทซีรีส์สร้างขึ้นเพื่อความบันเทิงเท่านั้น](http://i.ytimg.com/vi/m9Q6MwoWgaQ/mqdefault.jpg)
Next time use ten ft material 10ft legs will not stand on its own. One should of been building the other passing the materials
yuppp how are they just gonna let the legs stand like that? even if its a 5 that aint proper
Standers are 9ft if never seen a 10ft one but I know what you mean how not to erect scaffolding when your boss is watching if I took that long to put that bay well let's say I'd be demoted to labourer lol
Title is wrong, should read, How NOT to install cuplock scaffolding assembly
Imagine these two building up 40ft then going around a chimley 😂😂
You can tell these guys work in the office and only chose them for the video while the real workers are out in the field SMH
I was taught u only need to put bars for every 4 cups is this true?
jimbob no it's count 1,2, and then three where the bar goes, and if you have a tall scaffold over 10 foot it's 1,2,3,then 4 where the bar goes then handrails then boards or metal pans then hand rails and knee rails, toe boards etc.
@@joshua5150headfirst what happend with the jack pads?
Every 4 cups is where the strength is.
You have to have bars every 6’6” which is equivalent to 4 cups. My advice...report this video and never watch it again.
do they make starter cups?
Jesse Gomez nahhh bro just cut one like we all do
It's practice?
Am I missing something or did they not use a torpedo to level it? Also, go 3 cups up and place a hor on the 4th. This is different scaffold than what I do so I guess it's right?????
Since it’s concrete they just preset the jacks to the same height assuming concrete is level everything should be level also some places rules double wrap scaffold when beginning
dont know what country this is filmed in but... no handrail, brace, access or fully decked health and safety would have a field day on this and thats after they are done going over the ppe matter.
Poor! Both guys let the standards go. (they could fall at any time) the one closest to the screen forgot to open the cups to place the 1.3 transom in. All cuplock components were not in reachable distance. if that is a professional way to install cuplock god help the people who have done it that way. They made it look so hard.
nice
No barricade wtf !!! No anything lol osha where are you
मुझे खरीदना है ।
How to install cuplock scaffolding assembly
Kab log setting ka saman chahie aur company ka number
why not wearing safety shoes?? hahaha
Honestly this video is a disgrace they should have put the jack down and then the 5' bar and the 3' bar (sizes just guessing) next to the jack. Then put the leg on the jack and put both bars in the bottom cup and close it so it supports its self and you can keep building from there. The way how they set that up could have probably fell over on to some expensive equipment or could have hit a valve the made a gas leak depending on where you're working. Try again guys. Not this time.
Unsafe condition erect the scaffold
Fools that is all I can say
जूता तो पहन ले
You don't know how to close a cups he has his hand too close to to the strike zone rookie mistake
thatd not how you install cuplok thats some clown deals going on
Cup lock is the worst scaff system. Anything but ringlock should be made illegal
nonses