If they changed some of the standards by 50mm for example, most of these “non compliances” would not be picked up and that scaffold would STILL never fall down… it’s the most challenging thing about scaffolding inspections or teaching scaffold inspections. Appreciate the hidden lesson.
There wasnt any transoms on it. He pointed at the puttys which the timbers sit on. You dont hang transoms off your ledgers, they meant to join the standards. The putlogs are to support the timbers.
I'm wondering if I can erratic a scaffolding for myself (just for domestic use) or do I need to have the same formal qualifications as professional scaffolders?
Anybody can make a scaffold as long as it’s fully decked out leveled and braces installed correctly and a few other details. Just depends on how high you’re gonna go or if the scaffold is gonna be used to stage heavy materials like bricks and whatnot
Ummm use pinlock or cuplock lol. Tube and clamp is insane. Tube and clamp Extremely inefficient. Everything about it. The time it takes. Loads. Hanging scaffold. It’s just nuts
I love everyone commenting on the Aberdeen transoms on a fault inspection scaffold. Garry its been a fair few years since we were offshore and I wonder if the big cod still like the same food as we gave them. The cameraman has been paid off for not helping.
Fittings should done up at how many NM to make a class A 6.1kn That isn't taught and should be. Because depending on different torques from different scaffs that slip resistance would be varied and not spot on.
Panowie wszystko jest ładnie pięknie ale w rusztowaniu rurowo złączkowym nie używamy złącza obrotowego. stężenia kręcimy na złącze stałe do podłużnic i poprzecznic.
Cześć, Wiesz może czy jako osoba prywatna, która potrzebuje rusztowania na własny domowy użytek mogę sobie postawić takie rusztowanie bez oficjalnych uprawnień czy muszę mieć te same uprawnienia co mają pracownicy stawiające rusztowania dla firm? Dzięki
IAN ,WHY DID YOU LET THEM PUT IT UP LIKE THAT? SACK THEM SHIFTY SCAFFS, AND THE SUPERVISOR WHO LET THEM DO IT,AND I RECKON THE CAMERAMAN WAS IN ON IT TOO!! SACK THE LOT OF EM!!! ALL THE BEST ,YOUR OLD ROOMY GAZ
They are transoms,a putlog is one end of tube flattened so it sits in brickwork,hence the name putlog scaffold! Yes it acts the same as a transom so boards sit on them,but a putlog scaffold has only outer standards, you dig?
Half wraps or full wraps or fanny clips in the trade lol, obviously this is a training vid showing how not to do it because anybody who knows what they are doing wouldn't use clips or not level tubes (ie scaffolding poles )
I'm about to build a house for myself. When I got the blueprints from the architect I looked at them and they seemed nice. After that I started to plan the scaffolding. The house has a mansard roof (french or curbed roof, I'm not sure what construction workers call it in UK or USA as I come from Sweden), so the scaffolding becomes a little more tricky than I'm used to. I'm a general construction worker, not a professional scaffolder. For the pros this should be easy. For me, fun and interesting.
I was able to last for 2 weeks unloading 90 kg windows with a parner from a lorry and then getting them up the lever onto a 5-storey building. Then we we were putting the windows on a hand made scateboard and driving it through scacfold flooring. The scaffolders build the flooring out of wooden planks, not metal with teethed holes. The hardest part was carrying the windows by hands into the rooms, not driving them on a scaffold flooring. The pay was shit through the agency.
That wasnt a punching That was a dead man/dropper no?
If they changed some of the standards by 50mm for example, most of these “non compliances” would not be picked up and that scaffold would STILL never fall down… it’s the most challenging thing about scaffolding inspections or teaching scaffold inspections. Appreciate the hidden lesson.
I Wana job in scaffolding field as expo
Standardize the use of scaffolding, pay attention to personal safety, very meaningful video.
There wasnt any transoms on it. He pointed at the puttys which the timbers sit on. You dont hang transoms off your ledgers, they meant to join the standards. The putlogs are to support the timbers.
Nate Wells putlogs ?? I’m sure they go in the wall pal that’s a type of scaffold not an intermediate transom lol
craig corbett what are you talking about? A single or double putty hold the tube that you lay your timber planks onto?
In the uk it’s called a transom, in Australia New Zealand they fall it putlog and they call singles PCs
4:25 That is a "Dropper".
Aka "Dead Man".
Not a punching.
I'm wondering if I can erratic a scaffolding for myself (just for domestic use) or do I need to have the same formal qualifications as professional scaffolders?
Anybody can make a scaffold as long as it’s fully decked out leveled and braces installed correctly and a few other details.
Just depends on how high you’re gonna go or if the scaffold is gonna be used to stage heavy materials like bricks and whatnot
Ummm use pinlock or cuplock lol. Tube and clamp is insane. Tube and clamp Extremely inefficient. Everything about it. The time it takes. Loads. Hanging scaffold. It’s just nuts
Top lad. Brexit 100%
Sdandersin yandaki siqlın boltu çöledi onu deyişin
I love everyone commenting on the Aberdeen transoms on a fault inspection scaffold. Garry its been a fair few years since we were offshore and I wonder if the big cod still like the same food as we gave them. The cameraman has been paid off for not helping.
Worked with Andy in the early 90s and resantly what this man doesn't know about scaffolding isent worth knowing his a true pro at his trade
Went through part 1 and 2 with Andy teaching
thanks, it's very useful.
Call yourself an inspector but missed the fact it doesnt have one check clamp on it?
INI BOS KHAIRUL TOKE BESAR BANGGUNAN KERAJAAN SDN BHD
TINGGI BANGGUNAN KERAJAAN INI ADALAH 40 TINGKAT YANG AKAN DI BUAT
TIDAK LAMA LAGI
Aberdeen transoms missing in action? ;)
Fittings should done up at how many NM to make a class A 6.1kn
That isn't taught and should be.
Because depending on different torques from different scaffs that slip resistance would be varied and not spot on.
That’s Andy used to work at safety and access,did all my tickets great bloke
@Hector Cullen nobody cares so fuck off
Wonder why these blokes over there haven’t switched to system like pin or cuplock for example
Shyamkumar mahto scaffolder 🙏🙏🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🙏🙏🙏
Distance between two ladders in long scaffolding means one ladder to another ladder distance as per procedure. Kindly aware me.
Panowie wszystko jest ładnie pięknie ale w rusztowaniu rurowo złączkowym nie używamy złącza obrotowego. stężenia kręcimy na złącze stałe do podłużnic i poprzecznic.
Cześć,
Wiesz może czy jako osoba prywatna, która potrzebuje rusztowania na własny domowy użytek mogę sobie postawić takie rusztowanie bez oficjalnych uprawnień czy muszę mieć te same uprawnienia co mają pracownicy stawiające rusztowania dla firm?
Dzięki
As an American not much of a tube and fitting guy but I know that brace should not be on a strap
Cuplock scaffold 5m/5m. Height 3m rest shelter eraction how many materials and farmula plz
Please stay connected. for latest videos and information.
dont use this scaffold
That's a terrible way to build scaffholding lol
Hello from scaffolder inspector Malaysia
IAN ,WHY DID YOU LET THEM PUT IT UP LIKE THAT? SACK THEM SHIFTY SCAFFS, AND THE SUPERVISOR WHO LET THEM DO IT,AND I RECKON THE CAMERAMAN WAS IN ON IT TOO!! SACK THE LOT OF EM!!! ALL THE BEST ,YOUR OLD ROOMY GAZ
They built it like that so he can find errors so he would inspect it and show us its faults.
This scaffold is dangerous, there are no Aberdeen’s to stop it closing or widening at the node points.
Yes the traversal bracing
Bro that scaffold is like 50 years ago in london
Lots òf supply in Brisbane
A step stool on a scaffold I guess these guys haven’t worked off horizontals
As a manager exporters
Great information, well presented. Thanks for the video.
Thanks, from Craftman house
You keep going on about transoms... I only see putlogs...
Matthew Lowe it’s a transom putlog
Is what aussies or kiwis call it
They are transoms,a putlog is one end of tube flattened so it sits in brickwork,hence the name putlog scaffold! Yes it acts the same as a transom so boards sit on them,but a putlog scaffold has only outer standards, you dig?
Runner no under transom
Gates on the wrong way aswell 😜
scaffolding tube ka od I'd. thignesh and weight
He might as well have explained that in Chinese, to me anyway.
beautiful lesson to be learnt...
Braces with a single😂😂😂
Where’s the doubles at boy
i am 1 koisan sar 2.50.by 1.80. scaffolding relakcayn how mac go ine loing
Trying to make a trade out of spanner labourers
Donkey
Shut up you clown
you silly man
Muahthai&bjj pfft.. you wouldnt last two seconds in our world boy
Half wraps or full wraps or fanny clips in the trade lol, obviously this is a training vid showing how not to do it because anybody who knows what they are doing wouldn't use clips or not level tubes (ie scaffolding poles )
Great information
p
انا فاحص سقالة في شركة IGCC
Do u offer training in Saudi arab
I'm about to build a house for myself. When I got the blueprints from the architect I looked at them and they seemed nice. After that I started to plan the scaffolding. The house has a mansard roof (french or curbed roof, I'm not sure what construction workers call it in UK or USA as I come from Sweden), so the scaffolding becomes a little more tricky than I'm used to. I'm a general construction worker, not a professional scaffolder. For the pros this should be easy. For me, fun and interesting.
Bro what a messss
Super level inspection 💪
Sir 11 ties kaise kaise lagta hai plzz is type ki video uplod kijiye
😢🎉
Thanks. Have I miss that the planks should also be secured? Informative.
Nice
No good skaffold
Plzz types in tie and exmple
Thanks
What is scaffold used for? Can anyone tell me please?
Working platforms- over head protection- walk way - hand rails- as an access
@@trent6466 thanks for information
Standards scaffold erec quality
جيد شكرا
Thank you for your tutor ..
must b red tag
Hindi me bolo
جيد شكرا
Chandan
❤❤❤❤👍👍👍👍
I was able to last for 2 weeks unloading 90 kg windows with a parner from a lorry and then getting them up the lever onto a 5-storey building. Then we we were putting the windows on a hand made scateboard and driving it through scacfold flooring. The scaffolders build the flooring out of wooden planks, not metal with teethed holes. The hardest part was carrying the windows by hands into the rooms, not driving them on a scaffold flooring. The pay was shit through the agency.
Nice tring
Sunat
Nice tring
Thanks god we use sti and atpack just pin them together
Whats that . Where in the world are you .
Is it like layer like altrad use
@@czhawourbanowicz644 lol im in the United States that’s some of the huge vendors for pin lock scaffolding
Very educative , but speech was not very clear, I find the American accent to have better clarity than the brits way of expressing things.
That makes you a mong then don’t it
Not really anything he can do about his accent, unless he does an impression of Donald trump 😂
Semiconductor clean room scaffolding
Won't get away with that shit in aus/NZ
Cant say i know. But i grew up in aus and the scaffolds i saw were dogdy as fuck( 2 boards,no handrails around a house.)
@@SlaterGator same in nz sum right dodgy shit especially the tube jobs well behind the uk in health and safety
British are the best scaffolders that's just a fact
Very informative presentation! 👍👍
What wrong with swivel as bottom transom takes more load than single talking shit again