What is the bolt in the bottom right of the screen at 13:43. A friend replaced the head and timed my engine and I have found this bolt in a tray when resituating the engine into the car
Great video, I wanted to see if this is the appropriate fix for the code p1338 , p0012 Thanks. I think something is wrong with the oil pressure and cam shaft is out of timing
Davey Junior the shop is located in Herndon Virginia. The price can vary depending on quality of parts. I always recommend OEM parts specially for something like this
hii sir. i have aproblem with my mini cooper s 2012 engine n18b16a..the computer shows " low pressure" . i replaced a new high pressure pump and its didn't work. what do you is the problem?
GANAIEM MOHAMMAD well yes, the check engine light is there because is a malfunction, which would give you a code, but you need a capable scanner to get it.
@@MaicSalazarDiagnostics gracias por responder a mi comentario esquí estoy buscando un video como este disculpa mi comentario, oye tengo una pregunta al mover los dos arboles de levas tengo que volver acomo dar el tiempo , quiero reemplazar los stem seal valves en un contramano sin quitar la cabeza gracia pero solo tengo dudad si solo mover los timing sprocket y después regresarlos y torquearlos como estaban o tendría que mover todo el tiempo n aflojar y volverlo a acomodar travez gracias
amorosoelguru lamentablemente en este motor tienes que hacer todo el proceso de poner en tiempo si aflojas los sprockets. El diseño no permite cosas a medias o te arriesgas a torcer válvulas. Bendiciones
@@MaicSalazarDiagnostics ok , una ultima pregunta tendría que remplazar los tornillos del kit del tiempo con solo aflojar o podría usar los mismos , el auto tina 125mil millas recomiendas cambiar de una vez la cadena muchas gracias bendiciones par vdts también
amorosoelguru definitivamente! Y la cadena es un definitivo si! Solo que tu cliente no quiera! Pero por las millas y lo que vas a hacer es el mejor camino a seguir!!
Great tip about watching the oil pump gear! That helped me in my repairs
Thank you, now I know this job is too much for my skill set…now to find a mobile mechanic in N VA…the valve cover is off already lol
Mini TC
really good video. thanks for your lovely job
Fetar Fetar thank you.
You’re good maic Salazar!!!
Did you put oil or some kind of lube over camshaft vanos bolts before torque them. Or just clean? Thanks
What is the bolt in the bottom right of the screen at 13:43. A friend replaced the head and timed my engine and I have found this bolt in a tray when resituating the engine into the car
That is the bolt that holds the guides in place. They are replace everytime ( they should be replace everytime)
Hi,i have the same engine but doesn't start, how do I know if the engine is not in time?
Great video, I wanted to see if this is the appropriate fix for the code p1338 , p0012
Thanks. I think something is wrong with the oil pressure and cam shaft is out of timing
looks Great! what did you use to clean the engine?
where is the #1 bolt for the timing that they want you to untighten ??
How much did u charge to do this? I’m thinking about the same thing but don’t want to get ripped off
Great video. I need to get my car done. Where your located. How much those all this cost?
Davey Junior the shop is located in Herndon Virginia. The price can vary depending on quality of parts. I always recommend OEM parts specially for something like this
Ok thank you. I'm in Toronto Canada.
Davey Junior my friend and great mechanic Thomas is located in British Columbia.
Davey Junior this is one of his videos
th-cam.com/video/d4W2j2Ikp1g/w-d-xo.html
Maic, where I can find this repair manual from your laptop and where I can find all torques? Thx!!!
Seppel 51 sorry for the late response!
Try this link! Cheers
www.newtis.info/tisv2/a/en/
Changing the timing chain requires also to change the cam adjuster gears?
Sometimes the vanos can go bad, but it's not as common.
Nice bro 👏🏾👏🏾👏🏾
Hi, is this similar to R60? Ty
What’s your process for cleaning the cams and valve area? Looks great!
None. That engine is in good health. Has seen proper, timely oil changes. That's how any properly maintained engine will look inside.
amigo buen video graias , una pregunta como sellama la pagina de donde encuentras los datos informacion que estas viendo en el video
gracias
Este es de www.identifix.com lo mismo encuetras en Mitchell y ALLDATA
@@MaicSalazarDiagnostics muchas gracias muy abmable
hii sir. i have aproblem with my mini cooper s 2012 engine n18b16a..the computer shows " low pressure" . i replaced a new high pressure pump and its didn't work. what do you is the problem?
GANAIEM MOHAMMAD can you tell me the code?
there is no code at the dash. just a engine light.. half engine
GANAIEM MOHAMMAD well yes, the check engine light is there because is a malfunction, which would give you a code, but you need a capable scanner to get it.
i don't know what to say. i paid more than 2500$ and one helped me. what do you think is the problem? with out the high pressure pump
@@MaicSalazarDiagnostics i am getting the same issue and i get the half engine and codes are p1338 and p1339
What are the torque specs on the motor mount? Been searching everywhere trying to find it.
Type Thread. Tightening specifications. Dimension
1AZ Engine support bracket to engine mount
R55 / R56 / R57 / R58 / R59 / R60 / R61 M12x1.5 -10.9 nut
100 Nm
2AZ Engine mounting bracket to adapter plate
R55 / R56 / R57 / R58 / R59 / R60 / R61 M10 8.8 screw
38 Nm
R55 / R56 / R57 / R58 / R59 / R60 / R61 M10 10.9 screw
56 Nm
3AZ
Adapter plate to engine
R55 / R56 / R57 / R58 / R59 / R60 / R61 M10 8.8 screw
41 Nm
4AZ
Engine mount to body
R55 / R56 / R57 / R58 / R59 / R60 / R61 M10 10.9 screw
68 Nm
Thank you so much!
que dices apenas se te entiende ..
amorosoelguru si disculpas! Este vídeo es del 2017 y mi micrófono en ese tiempo no era de lo mejor.
@@MaicSalazarDiagnostics gracias por responder a mi comentario esquí estoy buscando un video como este disculpa mi comentario, oye tengo una pregunta al mover los dos arboles de levas tengo que volver acomo dar el tiempo , quiero reemplazar los stem seal valves en un contramano sin quitar la cabeza gracia pero solo tengo dudad si solo mover los timing sprocket y después regresarlos y torquearlos como estaban o tendría que mover todo el tiempo n aflojar y volverlo a acomodar travez gracias
amorosoelguru lamentablemente en este motor tienes que hacer todo el proceso de poner en tiempo si aflojas los sprockets. El diseño no permite cosas a medias o te arriesgas a torcer válvulas. Bendiciones
@@MaicSalazarDiagnostics ok , una ultima pregunta tendría que remplazar los tornillos del kit del tiempo con solo aflojar o podría usar los mismos , el auto tina 125mil millas recomiendas cambiar de una vez la cadena muchas gracias bendiciones par vdts también
amorosoelguru definitivamente! Y la cadena es un definitivo si! Solo que tu cliente no quiera! Pero por las millas y lo que vas a hacer es el mejor camino a seguir!!