N Ways To Remove An Oil Filter Without Special Tool, DIY - in 4K UHD
ฝัง
- เผยแพร่เมื่อ 14 มิ.ย. 2024
- Most times the engine oil filter is not too hard to remove, but occasionally you may encounter a very difficult one. When that happens, if you can't locate your best special oil filter wrench or you don't have another drivable car to run to the store, this video should help you. It would be nice if you can make use of the tools you already have in your garage. Depending on what items you have and the kind of car you have, I will show you 4 different ways to remove a stuck engine oil filter. Again it should not cost you anything. Note that your garage may have somewhat different items, in which case my video will inspire you to find your own solutions. If your filter is the canister type (not one time use), see this video on how to change it: • 6 Steps To Change Cart...
If you want to use the old fashioned screw driver to remove filter, here is my video to show you how to do it: • The Cheapest Oil Chang...
Index
0:00 overview
0:24 no space limit: car jack; C-clamp
0:53 timing belt & other belts
1:26 rope + wrench (voted the best method)
2:53 wires
3:20 screw
There are so many different cheap tools on the market. If one tool does not work, don't panic, try something else. Note that tools for oil changing are not that expensive. However, if you can't locate them or if you don't DIY often, simple tools shown in this video could come in handy. If you do change your own engine oil often, then investing in better tools may not be a bad idea.
Basically there are two elements: 1. non-slip between filter and your tool. 2. leveraged long arm can deliver force to the filter. This is very similar to jar opening: • 11 Ways To Open Any Ha...
High definition video may help you see all of this better. This video is shot in the 4K UHD setting (if you have 4K TV, you may select this TH-cam Setting/Quality).
To see the details of some of the tools I made, please watch the following videos:
The Cheapest Oil Change Using Zero-Cost DIY Tools - in 4K UHD
• The Cheapest Oil Chang...
How to Raise or Lift a Car without Jack without Stand
• How to Raise or Lift a...
4 Ways To Make An Engine Oil Funnel & 2 Ways To Pour Oil
• 4 Ways To Make An Engi...
How To Turn Maintenance Light Off Honda Accord
• How To Turn Maintenanc...
Clean, Cheap and Easy Way to Change Engine Oil (Subaru Example)
• Clean and Cheap Way to...
Tags
Jack Stand
Oil Pan
Oil Filter Wrench
Oil Funnel
Oil Change
Cheapest Way
Engine Oil Change
DIY
Zero Cost
Motor Oil
cartrek.com/4-ways-to-remove-a...
fetv.com/4-ways-to-remove-an-o... - แนวปฏิบัติและการใช้ชีวิต
You don't get paid enough for what ever you do you are a genius
thank you for the compliment
LtCmdrMaximus hes no genuis it runs in his blood so it dosent count
Rope/wire trick worked better then the wrench itself what a genius
This knot trick is MAD SCIENCE! THANK YOU GENIUS ASIAN!
This is a true diy lifehack. All those other fake videos out there cutting up toothbrushes and hot gluing them to razor blades to make box cutters. You're out here saving us real time and money
Holy shit. This guy is an actual genius. I love ingenuity like this.
thank you for taking the time to provide feedback.
You are a very intelligent man, maybe thats why you have a nice home. thank you, i have a boat and the filter is down low and very very stuck. i spent two days with no luck. i will try your ideas , thank you so much. San Diego
thank you for taking the time to provide a feedback
dude, you're a genius. I had to use the rope then the screw on my motorcycle with VERY limited space. thanks for this post!
thank you for sharing your result and nice comments
I really appreciate you taking the time to make this video, I was caught in a jam right before my road trip without an oil filter wrench and you saved the day!
thank you for sharing your result.
The rope thing totally worked, Thanks!
thank you for sharing your result.
Thank you so much for this inspiration. I don't have an oil filter wrench and I'm not sure one would have fit in the tight space on my tractor. I spent over an hour trying various means, only getting more frustrated with each failed attempt. I used your idea of putting a long screw through the filter, grabbing it with a wrench, then using a second wrench for torque. Worked way better than expected! My frustrated heart thanks you!
very nice improvise. Thank you for taking the time to share, it will help other viewers.
The trick with the rope and wrench worked great! Thank you.
This guy is amazingly resourceful! All that info in such a short video. I need this man on speed-dial!
More power to you Brother, and have a wonderful life. You made my day. :)
thank you for your kind words
you are brilliant and also kind and generous with your time to show all of your special tricks. I hope one of them will help me remove my three stuck RO filters. Thanks again.
You bloody champion. I conveniently had some timing belts laying around, and it worked like a boss. I have replaced many stubborn oil filters before but this one was on a new level. Thanks to you, it went smoothly without frustration. Good Kudos to you sir :)
thank you for taking the time to provide a feedback
Works well with the rope excellent man good video.
thank you for taking the time to provide a feedback
Holy smokes! This guy has a way to get out of every “tight” situation. He will definitely survive the zombie apocalypse. Thanks 👍
quite a unique witty comment, thank you.
the rope idea was the best! thank you Asian man your the best! 😊
+Nas Jacobson thank you for your feedback
That rope trick worked! Unbelievable! THANKS!
Thank you for sharing your result. Glad we could help.
this video was really helpful and really simple ideas! thank goodness for this guy I didn't have a filter tool and it was stuck on pretty good. I used the nail method. works great
thank you for taking the time to provide a feedback
Best instructional video ever! Cheers!
+Whiteblooded thank you for your feedback.
Thank you for the demonstration of lots of inventive ways to accomplish this!
thank you for your nice words.
I never comment or like videos. But I've been under my truck all day with the oil already drained out, can't go no where, and the goober who changed my oil tightened it down too tight. So thank you. I'm about to go try my belt
thank you for taking the time to provide a feedback
I was stuck with no oil in the car, an old stuck filter and nowhere to get a filter wrench from. The clamp idea worked perfectly. Thanks Genius Asian dude for giving a variety of ideas.
perfect, glad you found the clamp and thank you for leaving feedback.
Outstanding info. Wish I could remember these ideas when the need comes up. Thank you.
thank you for taking the time to provide a feedback
This is absolutely the best shady tree mechanic tips I have ever heard! Awesome MacGyver skills to know, thank you! 🔥
I am very happy and thrilled when someone can appreciate my videos. 👍 Thank you for taking the time to leave very nice comments.
Thank you so much. You saved me a trip to the autoparts store.
Glad I could help. thank you for taking the time to share your success, your comments will help other viewers.
Very good sir, a honest man sharing his wisdom
Thank you for taking the time to provide feedback.
this guy really uses his brain. i have struggled to locate a wrench to remove my car oil filter, he givees these many ways to do it.
thanks a lot
+Bala Subramanian Thank you for taking the time to provide feedback.
I used the belt method and it worked like a charm. Thanks!
Thank you for taking the time to provide feedback. This will help others.
That rope trick worked wonders on this stuck oil filter. Thank you so much!
thank you for taking the time to share your result
Thanks, great help. With your inspiration I used my adjustable clamp and got the job done! Cheers.
+Jorg Lange thank you for your feedback and tips.
This helped me SO MUCH!!! I had bought two clamps that didn't work, but first try with the rope technique and it worked. Thank You soooo much
+Amir Oskoui Thank you for taking the time to write feedback.
Thank you this was very helpful. You taught me many ways that I never thought of. So now I don't need to buy a $15 tool. Thanks again.
This worked for me; the rope & 2 wrench methods.
Thanks!
Glad it helped! Thank you for taking the time to share your results, your comments will help other viewers to save time and money.
Thank you for your help ! the string version worked a treat !
Glad it helped! Thank you for taking the time to share your result, your comments will help other viewers.
Brilliant. A thumbs up is not enough. The rope and wrench trick worked for me although I am sure I did not mange your elegant knot.
Thank you for your kind words and letting us know what worked for you.
While watching this video i gained strength and managed to remove it with my bare hands just before i try to do it with cable... thanks for the video
Great job! Yeah, I know I can do it, but when I talk to friends, not many people have the strength or the will to do it.😀
You are a genius. Thank you.
That was incredible, what a boss
thank you for taking the time to provide feedback
its very helpful .i just finished changing oil of my car .thanks alot. this is the best diy oil filter remover.
thank you for your kind comments and taking the time to provide feedback.
Thank you very much! You made my day 👍👍👍
You are one smart and creative engineer ! Thank you for your video.
Thank you for taking the time to leave a encouraging comment.
Good tips.. thanks.
Thank you very much!! Used your leather belt idea with the plyers to remove a stubborn old oil filter. Thanks again!!
thank you for sharing your result
I love shit like this. I always find myself lacking the proper tools for things and I am not very strong either so I always have to find a way around the problem. But when I came to this oil filter, I was stumped. My little hands could barely fit that deep in there but I had no strength in my wrists to turn it with such little wiggle room. This was genius. You're a genius. The belt worked like a freakin charm. Keep it up!!
glad my video helped you, and thank you for taking the time to provide a feedback, and thank you for the nice comments
Brilliant buddy you have just saved me a packet, the guy that was going to do this job for me has now been cancelled,😀😀👍🍻
Great 👍Thank you for taking the time to provide feedback.
Wow so many ways to solve the problem, thank you.
Thank you for taking the time to provide feedback.
This hack really helped me out,I used an old belt.thanks!
Great to hear! Thank you for taking the time to provide feedback. Your answer will help many other viewers to benefit from this video.
Thanks so much...every suggestion was very useful
thank you for taking the time to provide feedback.
thanks for posting this, i got it done in seconds with the vice clamp thanks brother
thank you for taking the time to provide feedback
I'm so grateful for this vidieo I've been trying to get mine off for hours until I watched this vidieo
This Man is a Living Legend.....if more people like you existed we would be able to fix anything! even world hunger!
thank you for taking the time to provide feedback.
very helpful thanks
You are a genius seriously, those are all brilliant ways to get it off and I could only think of one of them on my own, those methods are very helpful, I am just about to take mine off, and I am feeling much more confident now, thank you for sharing the good ideas.
thank you for your nice comments and taking the time to provide feedback.
You are most welcome, I just finished the job and because I had no rope I ended up using my tow rope, its a flat orange belt, similar to a cars safety belt.
I wound it around a 17 spanner starting on the open end and ending up with the tow rope loop near the ring on the spanner.
I then used a vice grip to clamp the belt over the bottom flat side of the spanner. It worked really well and the spanner stuck out quite a long way below the engine allowing me to be able to use the leverage of the vise grip nicely. Thanks so much for your help the job is done and I can go to work tomorrow morning.
the way to go!! Thank you for sharing!
thank you for this! gives me a few more things to try when I have one I can't get off.
+B Smith thank you for taking the time to leave comments.
Thank you sir was almost in a pinch
I used a tie strap and 2 vice grips but it worked ..
Thanks! very good options :)
Glad you like them! thank you for taking the time to provide feedback.
nice and well explained video.. lots of options to try ....
+Raman Arora Thank you for taking the time to provide feedback.
Very handy tips!Thank you 👍
Thank you for taking the time to provide positive feedback.
Boy you really saved my day thank you!
Glad I could help! Thank you for taking the time to share your result, your comments will help other viewers.
Thank you that was very informative
Thank you for taking the time to provide feedback.
Really useful, thank you!
thank you for taking the time to provide a feedback
thank you! great advice =)
I gave you a thumbs up for your instruction skills and great English!
thank you for taking the time to provide feedback.
I bought an oil filter wrench thinking it might fit on my motorcycle filter, not enough space. Thank you for providing exactly the answers I needed
Thank you for taking the time to provide feedback.
This guy's slick.
Very well done video! Thanks for the Help!
thank you for taking the time to provide a feedback
Thanks brother! I used your idea with a screw but used a long bolt and did it by hand.
Thank you for taking the time to share your tips. You must have a very strong hand!
Fantastic job my man fantastic upload!
thank you for the compliment
@@GeniusAsian they put BLUE loctite on the drain plug and used impact and this has become all day job. Now the filter wont budge...... Time to break out the drill 😳😬
Good work, nice suggestions. The rope method is perfect. The knot you made first is called a clove hitch
Thank you for providing the name of the knot.
Mr Genius.. you’re a genius indeed! 😂 I like that part when u said, not everyone have a timing belt lyin’ around.. Tq for the video.. helpful!
Thank you for taking the time to provide feedback. From your comments, I can see you really paid attention to my videos. Thank you.
Thanks a lot, the pants belt trick worked great.
thank you for sharing your result.
Dude is a genius. Thank you!
+Casey Hald He really is! Smart Chinese lol
7 years later this video just helped me out! Thank you
Glad it helped! Thank you for taking the time to provide feedback.
Great lesson, thanks
My pleasure!
Thanks for the great tips!
Glad it was helpful! Thank you for taking the time to provide feedback.
awesome I search a lot you this video is unique. thanks
thank you for taking the time to provide a feedback
Wrench + screw method is awesome.
Thank you for taking the time share your result.
thank you man...youre good!
thank you for taking the time to provide feedback.
really nice! Thanks!!!!
Glad you liked it! Thank you for taking the time to provide feedback, your comments will help other viewers.
very bright ideas who woulve known thank for the help
thank you for taking the time to provide feedback.
I like your ideas...great!!!!
Glad you like them! Thank you for taking the time to provide feedback.
The rope and cord tricks are very clever ways to get a homemade strap wrench, with lots of torque and means to work in confined spaces, as needed. Strap wrenches are actually pretty cheap anyway but if you don't have one...
thank you for your feedback
There are some very good tips in this video.
I had a chain wrench type remover that cut the filter in half...I would always recommenced a belt type if you have the space.
You have make a belt one for free :)
thank you for taking the time to provide a feedback
wonderful! thank you. amazing creative solutions!!!!!
thank you for taking the time to provide a feedback
simple genius, thank you.
Thank you for taking the time to provide feedback
This man is a genius
Thank you for taking the time to provide feedback.
Very good Video; thanks
thank you for taking the time to provide a feedback
this is genius thanks. Never would have thought of a belt and some vice grips. these things I have!
thank you for your compliment
Very informative. 👍
Glad it was helpful! Thank you for taking the time to provide feedback.
that's amazing, You can do more videos with new tricks.
thank you!
Great stuff. Thanks for sharing!
+jonanjello thank you for your comments
thank you for showing us your tricks
thank you for taking the time to provide a feedback
N
Love it Man! I need you for my handyman!
I could be quite expensive :) , but I am very happy to share free information. Thank you for taking the time to let us know your positive comments
Great video!
thank you for your compliment
Right on brother im gonna go try this right now
+tips thank you for your comments
Great ideas, you helped me out a lot. Ended up using a dog's choke chain.
+Kevin Izzo Thank you for sharing your idea
Very useful guide thank you
thank you for taking the time to provide feedback
Very userful thank you
+tehsalt thank you for your feedback.