Another great video, man. Keep it up! Question, I recently got mine setup by a local shop my question is, do you know if Austin's tank drops PSI over night? Let's say he leaves the car aired up to "ride" height/preset, when he turns on the car the next day does the PSI in the tank drop? I noticed mine does drop to like 120 PSI over two days or so, what I can think of is that the bags may be leaking and the tank just fills them up to ride height, if that makes sense haha. Thanks!
It sounds like you have a slow leak in a fitting or one of your air lines. I would take some water and soap mixture and spray it onto the areas that you think might be leaking. This will either confirm or deny if you are actually leaking. Also, the air in the tank will become more and less dense depending on the temperature that the air is. The more dense it is the less PSI you will have in the tank. The less dense it is the higher PSI You will have in the tank. The molecules in the air will vary depending on where you are.
@@Smeedia thanks man, I'll give that a try. If not I'll just take it back to the shop and see what they find. Other than that the kit is pretty awesome!
@@Smeedia I Think so, seems like they didn't use enough teflon tape to cover the threads but we will see. I'm going to see if I can take it in tomorrow morning.
Thank you! I'm getting there only been going for a few months now. This one video just gained some traction for me. But glad to see everyone being so interactive with the videos. I appreciate the support!!! 😁😁😁
@@Smeedia Ill be watching alot of your videos, im 16 and I can drive on my own, (finally) and ive feel in love with the wrx (have been for about 2 years, its my dream car) so ill watch any wrx related videos 😂.
Those year models suffer rod bearing failures due to bad oil feed engine design. (11-17) wrx/sti. Subaru had a settlement for this paying owners. Replaced my 2013 engine at 68k miles. Car was stock with a cat back. You’re better off getting a newer model the new EJ’s are better.
If you were to buy an affected car though Subaru would would replace the engine if it failed within its parameters. I would not put off all 11-17 models based off of that though. However it is good information to share
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
Literally THE BEST year/chasis of wrx/sti design ever. The factory wide flared panels are so beautiful on this chasis.
Cant agree more
Sweet video, the car looks sick in bags. Makes me miss my 2013 wrx sedan
Another great video, man. Keep it up! Question, I recently got mine setup by a local shop my question is, do you know if Austin's tank drops PSI over night? Let's say he leaves the car aired up to "ride" height/preset, when he turns on the car the next day does the PSI in the tank drop? I noticed mine does drop to like 120 PSI over two days or so, what I can think of is that the bags may be leaking and the tank just fills them up to ride height, if that makes sense haha. Thanks!
It sounds like you have a slow leak in a fitting or one of your air lines. I would take some water and soap mixture and spray it onto the areas that you think might be leaking. This will either confirm or deny if you are actually leaking. Also, the air in the tank will become more and less dense depending on the temperature that the air is. The more dense it is the less PSI you will have in the tank. The less dense it is the higher PSI You will have in the tank. The molecules in the air will vary depending on where you are.
@@Smeedia thanks man, I'll give that a try. If not I'll just take it back to the shop and see what they find. Other than that the kit is pretty awesome!
@@Smeedia I do have a leak, sprayed some soapy water and it made more bubbles than those toys used to make bubbles.
@@MexicanSniper11 is it a leak that your able to fix? I've seen some leak from the tank
@@Smeedia I Think so, seems like they didn't use enough teflon tape to cover the threads but we will see. I'm going to see if I can take it in tomorrow morning.
How are you below 1k? You make great videos
Thank you! I'm getting there only been going for a few months now. This one video just gained some traction for me. But glad to see everyone being so interactive with the videos. I appreciate the support!!! 😁😁😁
@@Smeedia Ill be watching alot of your videos, im 16 and I can drive on my own, (finally) and ive feel in love with the wrx (have been for about 2 years, its my dream car) so ill watch any wrx related videos 😂.
@@24Bryce I got you! I've got a lot coming up. 2 a week so always filming and doing something lol
Nice vid , what kind of edge trim was he using on the flairs ? I’m having trouble finding some that sticks
I beilive its just weather seal from tractor supply 🔥
Do you know what kind of front seats those are?
Which fuse did you guys run the wire to?
support for the local WA People. maybe we can work on my 06 viper :)
Oof! Love me a Viper 😍 my buddy over at fuse fabrication was making a twin turbo kit for one In his shop. Where in WA you at? 😁
Good vid, what rear diffuser is that? Thanks
I believe he had a verus engineering diffuser 😁
How much did you spend ball park?and are you Satisfied?I'm looking at this system for my 2011 STI?
Around $3000 for the set up, I had them kn my 17 STI and loved it!
Yooo it looks sick. But honestly if I did the install it would of taken me two days 😂😂 nice video tho
Thank you! After doing a few of them you get the rythem down pretty quick 😅
That look so good planning to get 2014 wrx sti. Is a 60000km 2014 wrx sti still worth it?
Oh yeah! The car is still in its early miles! The GRs are good looking body styles!
Those year models suffer rod bearing failures due to bad oil feed engine design. (11-17) wrx/sti. Subaru had a settlement for this paying owners. Replaced my 2013 engine at 68k miles. Car was stock with a cat back. You’re better off getting a newer model the new EJ’s are better.
If you were to buy an affected car though Subaru would would replace the engine if it failed within its parameters. I would not put off all 11-17 models based off of that though. However it is good information to share
What color is that?
I think it is called brushed titanium
@@Smeediamaan I love this colour, I know this is an older video but do you have any idea how I can figure out what wrap it is? Thanks Tanner ✌🏼
@@Pharowave I believe it was 3M charcoal grey 🙏
@@Smeedia thanks so much for the reply dude, you’re the best!