Thank you ! I follow your steps last night ! I used a flat screwdriver and less than a minute airbag was out , flat screwdriver will push the spring easier:)
Haha I couldn’t figure it out for a while but I did another one recently and the experience def helped and got it done in a few minutes as well. But glad I could be of help to you!
I’m getting ready to install my steering wheel, with the wire that controls the heating steering wheel since it’s not being connected did any error codes pop up on your dash and if so how did u wipe it out? Thx and great video
Nah nothing will pop up. Even if you turn on the steering warmer, it’ll just turn off automatically. So you can just tape it down somewhere where it won’t get in the way and you’re golden
14:30 so the wires that you connected with the electrical tape was for the LED lights ? I was a bit confused on that part. I’m getting the wheel without the LED lights
Great video man. Greata instructions. Could you show how to change the settings and stuff on the wheel? And show how to change the colours of the LED and at what RPM they go off on? That would be great.
I remember this was an issue that I came across. It’s been so long I can’t recall how I situated it but if it was my guess, it was a pairing issue with the receiver/obd box
A flat head screw driver, some small torx bits and ideally a wire splicer and crimps to wire the new wheel on. I think that’s pretty much it. Ohh and the took to get the main wheel bolt off
Do you have any updates about the powering of your will did it make your auto start and radio with - lights pop on all the time and if so what did you do for updating the wiring
You did Alright for the most part, "except you kind of Glazed over the Power module box". and its Relation to the wiring and its purpose in the install.
Yes I did! I found the torque spec on a forum so not exactly sure if it’s right but I did it.. or as the others said, 2-3 ugha dughas should be just fine 😂
Easy, plug it into the OBD port. Reset the steering wheel by pressing both left and right buttons down for a few seconds and the wheel should reset and connect automatically.
@@NabeelIqbal97 thanks I bought the car with the steering wheel already installed but no smart box came with it im guessing the dealership took it off… if I order the smart box separate it should work good right? The steering wheel turns on and everything
@@alexsalgado5205 thats a tough one. Different brands make very similar wheels so youd have to be sure OHC even made that wheel. I would reach out to them and see what they say. maybe theres a serial number you can provide or something to get a box synced
Great video. I was in doubt about doing this but after watching this video, I'm a lot more confident. Thanks.
Glad it was helpful! It def requires some patience but to save a few extra hundred from a shop lol, it’s worth ir
Thank you ! I follow your steps last night ! I used a flat screwdriver and less than a minute airbag was out , flat screwdriver will push the spring easier:)
Haha I couldn’t figure it out for a while but I did another one recently and the experience def helped and got it done in a few minutes as well. But glad I could be of help to you!
@@NabeelIqbal97 oh yes , I watched your video so many times and follow it all tru end ! Now I enjoying steering wheels :)
@@BlackSupercharge happy to hear it!
Super cool video👌💪🏽 easy to follow and made the install look super simple.
Appreciate you! Happy it was helpful
Thanks for the video bro. Where did you get the carbon fiber Steering wheel trim on the bottoms?
Dope video, really detailed and helpful 👍
Glad you liked it!!
I’m getting ready to install my steering wheel, with the wire that controls the heating steering wheel since it’s not being connected did any error codes pop up on your dash and if so how did u wipe it out? Thx and great video
Nah nothing will pop up. Even if you turn on the steering warmer, it’ll just turn off automatically. So you can just tape it down somewhere where it won’t get in the way and you’re golden
Great video was able to install mine today 🤝
Great to hear
14:30 so the wires that you connected with the electrical tape was for the LED lights ? I was a bit confused on that part. I’m getting the wheel without the LED lights
Correct. That was for the LED to power up. No LED, no problem. Then it’s just a matter of replacing all the parts and you’re good to go
@@NabeelIqbal97 thank you
Great video man. Greata instructions. Could you show how to change the settings and stuff on the wheel? And show how to change the colours of the LED and at what RPM they go off on? That would be great.
Reach out on IG, I can definitely help
What did you do to your exhaust that it sounds so nice
I have a question i bought the wheel and it didn’t come with obd 2 port reader didn’t come
Same company and all?
My car battery has been dead after installation of the steering wheel. Anyone have an idea what I did wrong?
Did you tap into the same wires I did? (Purple and black)
@@NabeelIqbal97 I don’t recall I have to check. Thanks for getting back to me
Derek wondering if you fixed the problem ?
Derek my car did the same to me last week did you find out what it was ?
@@derekreyes2698 did you find out what it was this happened to me last week
Mine comes on but says SN: then random numbers then it'll do a count down starting from like 500 seconds. How can I fix that?
I remember this was an issue that I came across. It’s been so long I can’t recall how I situated it but if it was my guess, it was a pairing issue with the receiver/obd box
@@NabeelIqbal97 I saw a button. I pressed and hold it but it didn't do nothing
@@rodrezcarson I sold the car so I can’t even go and figure it out for you..if it’s from OHC, you can email them for support
@@NabeelIqbal97 ok bet appreciate it. I'll do that and keep researching
Also... What size is the Center Allen Bolt Socket / Bit.. that is needed ?
T20
What tools are needed for this installation ?
A flat head screw driver, some small torx bits and ideally a wire splicer and crimps to wire the new wheel on. I think that’s pretty much it. Ohh and the took to get the main wheel bolt off
Send a link I want to buy the same one
I wish I could pay you to do mine. Great video.
Where you located?
@@NabeelIqbal97 queens NY. Near forest park.
Would’ve done it if you were closer lol
@@NabeelIqbal97 no worries. I appreciate the video dude.
@@NabeelIqbal97 would if mind if I reached out if I have any questions when I start my install?
What is the blue wire for? I have heated option but don’t know how to wire it.
Close it up and just tuck it away. Don’t need it from what I’ve experienced
Did you unplug battery or leave it connected?
Def unplug it lol
Where did you get that OD2 port ? I need one of those!!
Came with my steering wheel
@@NabeelIqbal97 know what it’s called by chance? So I could look it up
How is the LED display holding up? I want to buy one, but a few of my boys say they go out overtime.
Had mine in for 3 years and not a single issue tbh
Does drain your battery if you don’t drive the car?
@@dannielmancilla5167 nope. It shouldn’t if you do it right
bro please answer so the little blue wire from the carbon fiber you leave it there with tape covered ? does it not connect to anything ?
For me it didn’t connect to anything. Just the wires I mentioned
Did you have to plug anything into your OBD?
Yes, it should come with a box that connects to the OBD
I know this is a old vid I hope you respond but did the steering wheel drain your battery?
Nope, never! You might need to look at your wiring and make sure nothings exposed and the certain wires are the ones connected
Do you have any updates about the powering of your will did it make your auto start and radio with - lights pop on all the time and if so what did you do for updating the wiring
The wiring I showed in the video has no issues for me at all. It turns on when the car does and I haven’t had any problems since
happens to me too
Where did u buy this
Are you able to change the color on the led lights ?
Yup! You can change each one
You did Alright for the most part, "except you kind of Glazed over the Power module box". and its Relation to the wiring and its purpose in the install.
odb port powerd devices can fry your ecu and wireing
Beautiful !
How do you stop from getting a check engine light
This shouldn’t cause a check engine light unless something was done wrong
Mine don’t have purple wire bro.
Hey bro question, did you torque down the screw for the actual bolt to the steering wheel
Yes I did! I found the torque spec on a forum so not exactly sure if it’s right but I did it.. or as the others said, 2-3 ugha dughas should be just fine 😂
Bro I'm losing my mind, my steering wheel tails the right. & my electronic stability control now says it's needs to be serviced
Did this happen after putting a new steering wheel on or just happened randomly
Hey my rpm’s will not light up when I push the gas ? Help
Go into the setting and adjust min rpm threshold to 1000 and then the max at like 7000 and see if that works
My steering wheel flickers white and red what does that mean.
When is that happening?
I have a 2016 charger, I can't move the steering wheel, it's very hard
I would take everything back apart and make sure nothing is binding while you’re turning like the wires or anything.
Fyi that carbon fiber part on your airbag/horn will smack you in the face at 1000mph if your airbag ever engages.
Never thought of this lol but the new owners problem now 😂
🔥🔥
What brand is the wheel
Got it from a company off IG names jaliscos carbon fiber
My steeling wheel is slightly off I think it's not line up right😮💨
That was my biggest fear too😂
@@NabeelIqbal97 Man I'm still sick 😫
Can you only put this steering wheel in newer chargers and challengers?
I think they have some for 2004-11 as well. Just gotta find one but I’m sure they sell them
How do you install smart box
Easy, plug it into the OBD port. Reset the steering wheel by pressing both left and right buttons down for a few seconds and the wheel should reset and connect automatically.
@@NabeelIqbal97 thanks I bought the car with the steering wheel already installed but no smart box came with it im guessing the dealership took it off… if I order the smart box separate it should work good right? The steering wheel turns on and everything
@@alexsalgado5205 thats a tough one. Different brands make very similar wheels so youd have to be sure OHC even made that wheel. I would reach out to them and see what they say. maybe theres a serial number you can provide or something to get a box synced
@alexsalgado5205 have you found any by any chance? I got the same issue I only got the steering wheel but no box 😔
email OHC about an update for the ECU and you will gain the turn signals on the wheel
Ohh crap really?!
I need to try that!
I subscribe please send link soo I can buy one !!