Really awesome to see. I couldn't conceptualize doing this this without a mill but that was amazing. That belt sander did a lot of work. Thanks for sharing.
To have the resources to be able to do this is the biggest dream of mine. I couldn't imagine doing something you love for a living. Life is short and I can't seem to get where I want to be. Anyway, absolutely beautiful piece of art there! 😍
I feel you man, I became a machinist so I can learn to do things like this, almost 6 years in, I got a Bridgeport mill as a gift and I still don’t even have a garage to set it up. But be patient man, it’s about the little steps. I had no skills with my hands other than turning a screw 5 years ago and now I make parts for airplanes. I’ve come a long way yet I still feel far from my goal. But you’re off to a great start tho, watching these videos are actually extremely helpful.
@@rvdKnives you're so welcome and thanks for the reply. The frame lock is my fave knive to keep in my pocket. Cary a Kershaw knock out frame lock everyday. It beaten up and scratched but solid as a rock and I love it. Don't think I'd Cary this one on my pocket ;-)
@@rvdKnives no problem, thank you. I've been collecting custom knives s while and most of them are put away somewhere. I too am a builder/maker... it's a pleasure to use good well made tools, so I busted out a couple and now they're used every day and I love using them... If I owned this beautiful knife, I'd have to use it. Wouldn't you want your pieces to live a active and appreciated life rather than sit idle? Cheers R
Way to go...i bet you learned alot about yourself while making this... Abosolutely professional quality... *Comment from a 62 yr old professional artist/artisan 40 years in the business
40 years of art and artisan works...i seemed to not only learn about improvising the tools I had...but learned much about the quality of myself, in skillset and motivation. My favorite was making serious smoking tobacco pipes ...then showing them at the international artist pipe show ...where artist all over the world got together to exchange ideas and show their wares. Enjoy your work...precision work can be very therapeutic....live long and prosper...i am now in my retirement years and unable to do much...watching others brings back great memories
I don't have a belt sander and I'm thinking of making a folding pocket knife. I made a damascus kiritsuke knife, but it was days of hard work, experimentation, failures. I just don't have money for all the big machines. I just bought a few small ones like dremel, etc...
Thats a good start. I also didnt have the money for all the machines. I bought a Drillpress for 60 $ and all the other machines I built myself. You can make a good knife with not more than filing by hand. I made all my first knifes this way. It takes a lot of time but you can achieve the same results
Holy cow youv hot some skills! I hafta invent a knife like that where its a slingshot instead of a knife. Basicly with the pull back of a sliding button; two slingshot posts flick out from either side. And two slots in posts for quick setup of bands. I dont know the first place to begin. Do you have any ideas on the sping release and button system? Ballberring release or double friction spring or what? Prezzies for next christmas. Cheers nathan
Great work! I'm thinking of doing something similar, so I learned a LOT from watching your video. Nice to see someone doing stuff like that without a CNC and milling machines and a whole metalworking shop! Where do you get your titanium from? I'm up in Canada can't seem to find a supplier nearby, so I'm probably going to have to order some out of the US...
I used scrap pieces of TI 🤣 But I found a shop in Europe, where they sell it. Gonna test that soon. If you want prooven quality, go to alpha knife supply
You made a great knife, well done. Can I ask about the technology of electrolysis. I would be interested to know how the task is done, I will do it too. Thanks in advance 
Any worries the frame lock will kick out if there's any pressure against the spine of the knife with the angle in both the knife and frame lock? Seems with it being angled like that it'd help it kick out if you get what I mean?
Thanks for the comment. It needs to be angeled, otherwise the lock would make a pointcontact and you'll get lockstick. It is not pished out, even if you hammer on the blade (I tried) ;)
It is pure satisfaction to watch you make 100% handmade custom knives. Your framelock folder is Divine ! 👍👍👍
Thank you! Happy to hear, you like it :)
Impressive bro. Skilled worker building his own masterpiece.
That’s pretty cool. You have your process down perfectly
Amazingly impressed you did this alone, with equipment most people can acquire at some point in their lives...so well done!!
And that's how craftsmanship turns into art...
Some dishwashing soap in your container helps to catch the grinding dust so there's nothing floating on top of the water
I didn't think of that. Thanks for the tipp, will use that the next time!
What container? When?
@@stacygriffin9796 the red one with water in it!
Really awesome to see. I couldn't conceptualize doing this this without a mill but that was amazing. That belt sander did a lot of work. Thanks for sharing.
I'm in love with the shape, what a premium job you did.
Thank you :)
To have the resources to be able to do this is the biggest dream of mine. I couldn't imagine doing something you love for a living. Life is short and I can't seem to get where I want to be. Anyway, absolutely beautiful piece of art there! 😍
Thank you! I don't do it for a living, it's just a hobby.
Getting started is difficult, just try to make one step after another and you'll get further
I feel you man, I became a machinist so I can learn to do things like this, almost 6 years in, I got a Bridgeport mill as a gift and I still don’t even have a garage to set it up. But be patient man, it’s about the little steps. I had no skills with my hands other than turning a screw 5 years ago and now I make parts for airplanes. I’ve come a long way yet I still feel far from my goal. But you’re off to a great start tho, watching these videos are actually extremely helpful.
I really enjoyed watching you make this beautiful folding knife from scratch. 👍
Damn that’s one badass knife. I see why handmade flippers are a lot of money. That’s a lot of work!
Thank you!
Yes, it is a ton of work, but I think Its also more rewarding for the maker to see them come toghether compared to fixed blades
Wow! Impressive craftsmanship.
Thank you!
Awesome little knife. Thanks for sharing.
BEAUTIFUL KNIFE GREAT CRAFTSMANSHIP
Very impressive, great job.
Beautiful knife. Please give that drill press some love though, it's crying for a service at least.
Looks like it had a nice detent to excellent job 👍 👍
wonderful work for a wonderful knife !
Amazing Job there!
Awesome work man!
Thank you!
A beautiful knife and a skilled person. :)
That is a thing of beauty indeed. Fabulous skills. Thanks for making this clip. Great to watch.
Thank you :)
@@rvdKnives you're so welcome and thanks for the reply. The frame lock is my fave knive to keep in my pocket. Cary a Kershaw knock out frame lock everyday. It beaten up and scratched but solid as a rock and I love it.
Don't think I'd Cary this one on my pocket ;-)
@@rvdKnives no problem, thank you. I've been collecting custom knives s while and most of them are put away somewhere. I too am a builder/maker... it's a pleasure to use good well made tools, so I busted out a couple and now they're used every day and I love using them... If I owned this beautiful knife, I'd have to use it.
Wouldn't you want your pieces to live a active and appreciated life rather than sit idle?
Cheers
R
Amazing craftsmanship! Looks great!
Thank you!
Very nice, especially for your first knife
Восхищен вашей работой, браво Маэстро !
Way to go...i bet you learned alot about yourself while making this...
Abosolutely professional quality...
*Comment from a 62 yr old professional artist/artisan 40 years in the business
Thank you very much 🥳 Happy to hear that :) Yes, I definitely learned a lot, especially about precission and the new tools
40 years of art and artisan works...i seemed to not only learn about improvising the tools I had...but learned much about the quality of myself, in skillset and motivation.
My favorite was making serious smoking tobacco pipes ...then showing them at the international artist pipe show ...where artist all over the world got together to exchange ideas and show their wares.
Enjoy your work...precision work can be very therapeutic....live long and prosper...i am now in my retirement years and unable to do much...watching others brings back great memories
@@antonyandrerenaissanceart977 I am definitely enjoying it :)
I hope you enjoy your retirement and that you still are able to work on some projects :)
Sehr gut gemacht! 👍
Nice brother smooth knife ❤
Great Job Men
Nice design and great looking blade.
Thank you! :)
So nice!! Looks like the Laconico Gemini by Kizer!
💪😎👍
Great work, like I've always told my knife buddies is "making a proper folder is waaayyy more difficult than any fixed blade."
It definitely is ;)
Amazing I wanted one of these. Very nice, a work of art. My congratulations.🤩
Buy Steel Will Cutjack. Looks completely the same.
I don't have a belt sander and I'm thinking of making a folding pocket knife. I made a damascus kiritsuke knife, but it was days of hard work, experimentation, failures. I just don't have money for all the big machines. I just bought a few small ones like dremel, etc...
Thats a good start. I also didnt have the money for all the machines. I bought a Drillpress for 60 $ and all the other machines I built myself.
You can make a good knife with not more than filing by hand. I made all my first knifes this way. It takes a lot of time but you can achieve the same results
Superb job
Thanks!
Great job
I would buy one it’s a beautiful knife
Pretty cool.
Nice idea
Gran trabajo Bro
Shows u r skilled God bless
Thanks and you too!
Lovely blade!
Nice knife..i like it..👍🇮🇩
Thank you!
EXTRA WORK!!!
Nice job
GOOD MORNING, COULD YOU MAKE THE TEMPLATE OF THIS MODEL AVAILABLE
Would be awesome
Perfect.
I wan one . nice work
Super robota 👊🏻😎pozdro
So cool.
Sweet 🎉🎉🎉
very nice. I wish I can have that one.
Wow❤❤❤
Что за программа на первых секундах видео? для моделирования
Amazing!
Geiles Messer ! Ist hammer 🔨 geworden 👍
Danke ;)🙃
What is the software you used to design the knife?
Wow it's amazing! Do you have drawing for share ? Congratulations!!
What computer program do you use? To design the knife outline?
Holy cow youv hot some skills! I hafta invent a knife like that where its a slingshot instead of a knife. Basicly with the pull back of a sliding button; two slingshot posts flick out from either side. And two slots in posts for quick setup of bands. I dont know the first place to begin. Do you have any ideas on the sping release and button system? Ballberring release or double friction spring or what?
Prezzies for next christmas. Cheers nathan
Great work! I'm thinking of doing something similar, so I learned a LOT from watching your video. Nice to see someone doing stuff like that without a CNC and milling machines and a whole metalworking shop!
Where do you get your titanium from? I'm up in Canada can't seem to find a supplier nearby, so I'm probably going to have to order some out of the US...
I used scrap pieces of TI 🤣
But I found a shop in Europe, where they sell it. Gonna test that soon. If you want prooven quality, go to alpha knife supply
Amazing! What is the software that you used in the beginning?
Incrível..poderia fazer um vídeo passo a passo ..
Mavi rengi verirken hangi kimyasalları kullanıyorsunuz
Great looking knife you made. What thickness of metal did you start working with?
Nice
Beeindruckend.
Danke!
You made a great knife, well done. Can I ask about the technology of electrolysis. I would be interested to know how the task is done, I will do it too. Thanks in advance

Thank you!
You just have to connect a 12V powersupply to the knife and to a stencil soaked with salt water.
Very nice folding knife!
This is awesome. Thank you so much. What was that CAD program?
Thank you!
It was draftsight, but I think it's not free to use anymore
Great job. That’s a beautiful knife. Do you sell any of your creations?
Fantastic job, tell me if you can what is the blackening solution?
Blackening Solution?
@@rvdKnives Describe the surface treatment that produces the black color.
Awesome build, I'm assuming you started with precision ground steel?
I think you should use the angle grinder more often 😂
what kind of software is on the computer that you are using?
13:41 how is the filling jig called please? Where did you buy it? I need it so much! :D
Its the Lansky Sharpening set
bonjour...quel logiciel utilisez vous?
Vishka Vishkovski and the amazing dancing bear……………on the hot coal
Nice work! Maybe carbidize the lock bar? Otherwise the titanium will wear.
I have carbidized it, bit i didnt show it in the video
@@rvdKnives thats great! Really nice knife
schönes Stück? denke mit Steinmuster auf den Scales würde es noch besser ausschauen. Was ist es für eine Anwendung für das Projekt?
Where's the 2mm drill bit?
Oh you mean the centerpunch?
Ахирительно Красавчик👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🤝🤝🤝🤝🤝
You did use a mill.
Lmao. First comment I see ❤
Is there a template or drawing of this knife I could get? I'd like to try to make one. Great job.
I designed it my self, but you are welcome to copy the design if you like it
How did you know how far down the lock bar cut should go? Just curious for learning purposes. Thanks!
I eyeballed it. I think, Ekim Knives has a god tutorial about it
How long does the full process take to complete one?
Any worries the frame lock will kick out if there's any pressure against the spine of the knife with the angle in both the knife and frame lock? Seems with it being angled like that it'd help it kick out if you get what I mean?
Thanks for the comment. It needs to be angeled, otherwise the lock would make a pointcontact and you'll get lockstick. It is not pished out, even if you hammer on the blade (I tried) ;)
@@rvdKnives Very cool to know, thanks for the clarification and reply. :)
Please, what sizes of bearings do you use ? Thanks
I think those were 3/16" bearings
Reat job. Would you have a link for some plans/pdf?
I drew them myself ;)
@@rvdKnives ah ok. Cool. Great stuff you do.
@@tokerisan7972 Thank you!
This video is a master piece. Where can we purchase your knives?
Thank you! I don't have a shop, because knifemaking is only a hobby, not my fulltime job.
great work man! you let the bearing flush to the frame? or just a little soberb?
Thank you!
No, they stand off a little, so that there is a very small gap between the frame and the blade.
🤯
🤘
Where do you buy the titanium for the handle?! I cannot find it anywhere
For this knife, I used scrap pieces
How did you change the color?
By anodization. It's shown in the video
Question from a novice maker, but why didnt you cut your bevels before heat treating?
to prevent warping during the quench. Otherwise it might happen, that the bladetip is not perfectlty centered between the liners
Love your Vids you certainly know what your doing I'm just starting out with my first Knife hence what Oil do you use to harden your blades please.
Hello Gary
thank you! Good luck with your first knives ;)
I use vegetable oil
@@rvdKnives Thanks again.
Hey what is that disc cutoff wheel you use to cut the lock bar? Thank you :)
Its a damond cutting disk.
Booyah
Puedes publicar las plantillas